Bulletin I2111 rev. C 03/99 QUIETIR Series 20ETF..S SURFACE MOUNTABLE FAST SOFT RECOVERY RECTIFIER DIODE VF < 1.2V @ 10A IFSM = 300A VRRM 200 to 600V Description/Features The 20ETF..S soft recovery rectifier QUIETIR series has been optimized for combined short reverse recovery time and low forward voltage drop. The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. Typical applications are both: output rectification and freewheeling in inverters, choppers and converters and input rectifications where severe restrictions on conducted EMI should be met. Package Outline Major Ratings and Characteristics Characteristics IF(AV) Sinusoidal waveform VRRM range IFSM 20ETF..S Units 20 A 200 to 600 V 300 A VF @ 10 A, TJ = 25°C 1.2 V trr @ 1A, 100A/µs 60 ns TJ range - 40 to 150 °C D2 Pak (SMD-220) 1 20ETF..S QUIET IR Series Bulletin I2111 rev. C 03/99 Voltage Ratings VRRM , maximum peak reverse voltage VRSM , maximum non repetitive peak reverse voltage IRRM 150°C V V mA 20ETF02S 200 300 20ETF04S 400 500 20ETF06S 600 700 Part Number 5 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM I2t Max. Peak One Cycle Non-Repetitive 20ETF..S Units 20 A 250 A 10ms Sine pulse, rated VRRM applied Surge Current 300 10ms Sine pulse, no voltage reapplied Max. I2t for fusing 316 10ms Sine pulse, rated VRRM applied A2 s 442 I 2√t Conditions @ TC = 97° C, 180° conduction half sine wave 2 Max. I √t for fusing 10ms Sine pulse, no voltage reapplied 2 4420 A √s t = 0.1 to 10ms, no voltage reapplied Electrical Specifications Parameters Conditions 20ETF..S Units VFM Max. Forward Voltage Drop 1.30 V @ 20A, TJ = 25°C 1.67 V @ 60A, TJ = 25°C rt Forward slope resistance 12.5 mΩ VF(TO) Threshold voltage 0.9 V IRM 0.1 mA TJ = 25 °C 5.0 mA TJ = 150 °C 20ETF..S Units 160 ns I F @ 20Apk 10 A @ 100A/ µs Max. Reverse Leakage Current TJ = 150°C VR = rated VRRM Recovery Characteristics Parameters t rr Reverse Recovery Time Irr Reverse Recovery Current Qrr Reverse Recovery Charge S Snap Factor 2 tb/ta 1.25 µC 0.6 typical Conditions @ 25°C Ifm trr ta dir dt tb t Qrr Irm (REC) www.irf.com 20ETF..S QUIETIR Series Bulletin I2111 rev. C 03/99 Thermal-Mechanical Specifications Parameters 20ETF.. Units TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient (PCB Mount)** 0.9 °C/W 40 °C/W Ts Soldering Temperature 240 °C wt Approximate Weight 2 (0.07) g (oz.) Case Style D2Pak Conditions DC operation 20ETF.. Series R thJC (DC) = 0.9 K/W 140 130 Conduction Angle 120 110 100 30° 60° 90 90° 120° 80 180° 70 Maximum Average Forward Power Loss (W) 0 2 4 6 150 20ETF.. Series R (DC) = 0.9 K/W 140 thJC 130 Conduction Period 120 110 30° 60° 100 90° 90 120° 180° DC 80 0 8 10 12 14 16 18 20 22 5 10 15 20 25 30 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics 35 25 180° 120° 90° 60° 30° 20 RMS Limit 30 Maximum Allowable Case Temperature (°C) 150 15 Conduction Angle 10 20ETF.. Series T J = 150°C 5 0 0 5 10 15 20 25 Maximum Average Forward Power Loss (W) Maximum Allowable Case Temperature (°C) **When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note #AN-994 35 45 DC 180° 120° 90° 60° 30° 40 35 30 25 20 RMS Limit Conduction Period 15 10 20ETF.. Series T J = 150°C 5 0 0 5 10 15 20 25 30 35 Average Forward Current (A) Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics www.irf.com 3 20ETF..S QUIET IR Series 300 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial TJ = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 250 200 150 100 20ETF.. Series 50 1 10 550 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Bulletin I2111 rev. C 03/99 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. 500 Initial T J = 150°C No Voltage Reapplied Rated V RRMReapplied 450 400 350 300 250 200 150 20ETF.. Series 100 50 0.001 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) 0.01 0.1 1 Pulse Train Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current Instant aneous Forward Current (A) 1000 100 TJ = 25°C 10 TJ = 150°C 20ETF.. Series 1 0 1 2 3 4 5 Instantaneous Forward Voltage (V) 0.2 Maximum Reverse Recovery Time - Trr (µs) Maximum Reverse Recovery Time - Trr (µs) Fig. 7 - Forward Voltage Drop Characteristics 20ETF.. Series T J = 25 °C I FM = 30 A 0.15 20 A 0.1 10 A 5A 0.05 1A 0 0 200 400 600 800 1000 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 8 - Recovery Time Characteristics, TJ = 25°C 4 0.5 20ETF.. Series T J = 150 °C 0.4 0.3 I FM = 30 A 0.2 20 A 10 A 0.1 5A 1A 0 0 200 400 600 800 1000 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 9 - Recovery Time Characteristics, TJ = 150°C www.irf.com 20ETF..S QUIETIR Series 4 20ETF.. Series T J = 25 °C 3.5 Maximum Reverse Recovery Charge - Qrr (µC) Maximum Reverse Recovery Charge - Qrr (µC) Bulletin I2111 rev. C 03/99 I FM = 30 A 20 A 3 2.5 2 10 A 1.5 1 5A 0.5 1A 0 0 200 400 600 800 1000 Rate Of Fall Of Forward Current - di/dt (A/µs) I FM = 30 A 20 A 50 40 10 A 30 5A 20 10 1A 0 0 200 400 600 800 1000 Rate Of Fall Of Forward Current - di/dt (A/µs) = 30 A 7 20 A 6 5 10 A 4 3 2 5A 1 1A 0 0 200 400 600 800 1000 100 20ETF.. Series T J = 150 °C I FM = 30 A 80 20 A 60 10 A 5A 40 1A 20 0 0 200 400 600 800 1000 Fig. 13 - Recovery Current Characteristics, TJ = 150°C 10 Steady State Value thJC (K/W) FM Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 12 - Recovery Current Characteristics, TJ = 25°C Transient T hermal Impedance Z I 8 Fig. 11 - Recovery Charge Characteristics, TJ = 150°C Maximum Reverse Recovery Current - Irr (A) Maximum Reverse Recovery Current - Irr (A) 70 60 20ETF.. Series T J = 150 °C 9 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 10 - Recovery Charge Characteristics, TJ = 25°C 20ETF.. Series T J = 25 °C 10 (DC Operation) 1 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single Pulse 20ETF.. Series 0. 01 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Characteristics www.irf.com 5 20ETF..S QUIET IR Series Bulletin I2111 rev. C 03/99 Ordering Information Table Device Code 20 E T F 06 S TRL 1 2 3 4 5 6 7 BASE + 2 (K) 1 - Current Rating 2 - Circuit Configuration: E = Single Diode 3 - T = TO-220AC 4 - F = Fast Recovery 02 = 200V 5 - Voltage code: Code x 100 = VRRM 04 = 400V 2 6 - S = D Pak (SMD-220) Version 7 - Tape and Reel Option: 3 (A) 1 (A) - - 06 = 600V TRL = Left Reel TRR = Right Orientation Reel Outline Table 4.69 (0.18) 4.20 (0.16) 10.16 (0.40) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 15.49 (0.61) 93° 6.18 (0.24) 14.73 (0.58) 5.28 (0.21) 2.61 (0.10) 4.78 (0.19) 2.32 (0.09) 3X 1.40 (0.055) 8.89 (0.35) 0.55 (0.02) REF . 0.46 (0.02) 1.14 (0.045) 2X 1 0.93 (0.37) MINIMUM RECOMMENDED FOOTPRINT 0.69 (0.27) 11.43 (0.45) 3 4.57 (0.18) 4.32 (0.17) 8.89 (0.35) 17.78 (0.70) 2 0.61 (0.02) MAX. 5.08 (0.20) REF . 3.81 (0.15) 2.08 (0.08) 2X Dimensions in millimeters and inches 6 2.54 (0.10) 2X www.irf.com 20ETF..S QUIETIR Series Bulletin I2111 rev. C 03/99 Marking Information (K) EXAMPLE: THIS IS AN 20ETF06S INTERNATIONAL PART NUMBER RECTIFIER LOGO 20ETF06S 9G3A 9512 ASSEMBLY DATE CODE (YYWW) LOT CODE YY = YEAR WW = WEEK (A) (A) Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) FEED DIRECTION 1.85 (0.073) 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) 11.60 (0.457) 11.40 (0.449) 1.65 (0.065) 15.42 (0.609) 15.22 (0.601) TRL 10.90 (0.429) 10.70 (0.421) 1.75 (0.069) DIA. 1.25 (0.049) 16.10 (0.634) 24.30 (0.957) 23.90 (0.941) 4.72 (0.186) 4.52 (0.178) 15.90 (0.626) FEED DIRECTION 13.50 (0.532) 12.80 (0.504) DIA. Dimensions in millimeters and inches 26.40 (1.039) 24.40 (0.961) SMD-220 Tape & Reel 360 (14.173) DIA. MAX. www.irf.com 60 (2.362) DIA. MIN. When orderi ng, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and T RR. 7 20ETF..S QUIET IR Series Bulletin I2111 rev. C 03/99 WORLD HEADQUARTERS: EUROPEAN HEADQUARTERS: IR CANADA: IR GERMANY: IR ITALY: IR FAR EAST: IR SOUTHEAST ASIA: IR TAIWAN: http://www.irf.com 8 233 Kansas St., El Segundo, California 90245 U.S.A. Tel: (310) 322 3331. Fax: (310) 322 3332. Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. 16 Fl. Suite D.207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan. Tel: 886 2 2377 9936. Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice. www.irf.com