Bulletin I2152 rev. B 12/02 QUIETIR 85EPF.. Series FAST SOFT RECOVERY RECTIFIER DIODE IF(RMS) = 160 A VF< 1.35 V @ 100 A trr = 70 nsec VRRM 200 to 600 V Description/ Features Major Ratings and Characteristics Characteristics 85EPF.. Units 85 A The 85EPF.. fast soft recovery QUIETIR rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. IF(AV) Rect. Conduction The glass passivation ensures stable reliable operation in 50% duty Cycle the most severe temperature and power cycling @ TC = 85° C conditions. IF(RMS) VRRM range (*) IFSM 160 A 200 to 600 V 1100 A 1.35 V 70 ns - 40 to 150 °C Available in the new PowIRtab TM package, this new series is suitable for a large range of applications combining excellent die to footprint ratio and sturdeness connectivity for use in high current environments. Typical applications are both: VF @ 100 A, TJ = 25°C trr @ 1A, - 100A/µs TJ range Output rectification and freewheeling in inverters, choppers and converters Input rectifications where severe restrictions on conducted EMI should be met. Case Styles 85EPF.. 85EPF..J (*) for higher voltage up to 1600V contact factory www.irf.com 1 85EPF.. QUIETIR Series Bulletin I2152 rev. B 12/02 Voltage Ratings VRRM , maximum VRSM , maximum non repetitive IRRM peak reverse voltage peak reverse voltage 150°C V V mA 85EPF02 200 300 85EPF04 400 500 85EPF06 600 700 Part Number 20 Absolute Maximum Ratings Parameters I F(AV) Max. Average Forward Current I FSM Max. Peak One Cycle I2t 85EPF.. Units 85 A 1100 Non Repetitive Surge Current 1250 Max. I2t for fusing 5000 A I √t Max. I √t for fusing 2 70000 @ TC =75 ° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied A2s 7000 2 Conditions 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied A √s 2 t = 0.1 to 10ms, no voltage reapplied Electrical Specifications Parameters 85EPF.. Units V FM Max. Forward Voltage Drop 1.3 V rt Forward slope resistance 4.07 mΩ V F(TO) Threshold voltage 0.8 V I RM 0.1 Max. Reverse Leakage Current mA 20 Conditions @ 85A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VR = rated VRRM Recovery Characteristics Parameters 2 85EPF.. Units Conditions trr Reverse Recovery Time 190 ns IF @ 85Apk Irr Reverse Recovery Current 3.5 A @ 25A/ µs Qrr Reverse Recovery Charge 0.6 µC S Snap Factor 0.5 @ 25°C www.irf.com 85EPF.. QUIETIR Series Bulletin I2152 rev.B 12/02 Thermal-Mechanical Specifications Parameters 85EPF.. Units TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient 0.35 °C/W 40 °C/W RthCS Typical Thermal Resistance, Case to Heatsink 0.2 °C/W wt Approximate Weight T Mounting Torque 6 (0.21) g (oz.) Min. 6 (5) Max. 12(10) Kg-cm (Ibf-in) 85EPF.. Series R thJC (DC) = 0.35 K/W 90 180˚ 60 120˚ 90˚ 60˚ 30 30˚ Conduction Angle 0 20 Mounting surface , smooth and greased Maximum Allowable Case Temperature (˚C) Maximum Allowable Case Temperature (˚C) 150 0 DC Operation PowIRtabTM Case Style 120 Conditions 40 60 80 150 85EPF.. Series R thJC (DC) = 0.35 K/W 120 90 120˚ 90˚ 60 30˚ 120 RMS Limit 100 80 60 Conduction Angle 40 85EPF.. Series T J = 150˚C 20 0 0 30 60 90 120 Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics www.irf.com 30 60 90 120 150 Average Forward Current (A) Fig. 2 - Current Rating Characteristics Maximum Average Forward Power Loss (W) Maximum Average Forward Power Loss (W) 180˚ 120˚ 90˚ 60˚ 30˚ 140 DC Conduction Period 0 Average Forward Current (A) Fig. 1 - Current Rating Characteristics 160 180˚ 30 0 100 60˚ 200 DC 180˚ 120˚ 90˚ 60˚ 30˚ 180 160 140 120 100 RMS Limit 80 Conduction Period 60 40 85EPF.. Series T J = 150˚C 20 0 0 30 60 90 120 150 Average Forward Current (A) Fig. 4 - Forward Power Loss Characteristics 3 85EPF.. QUIETIR Series 1200 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial T J = 150˚C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 900 Peak Half Wave Forward Current (A) Peak Half Wave Forward Current (A) Bulletin I2152 rev. B 12/02 600 300 85EPF.. Series 1200 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150˚C No Voltage Reapplied Rated V RRM Reapplied 900 600 300 85EPF.. Series 0 0 0.01 1 10 100 Number of Equal Amplitude Half Cycle Current Pulses (n) Fig. 5 - Maximum Non-Repetitive Surge Current 0.1 Pulse Train Duration (s) 1 Fig. 6 - Maximum Non-Repetitive Surge Current Instantaneous Forward Current (A) 1000 100 TJ = 25˚C 10 TJ = 150˚C 85EPF.. Series 1 0 1 2 3 4 5 Instantaneous Forward Voltage (V) 0.22 Maximum Reverse Recovery Time - Trr (µs) Maximum Reverse Recovery Time - Trr (µs) Fig. 7 - Forward Voltage Drop Characteristics I FM = 80 A 0.2 0.18 40 A 0.16 20 A 0.14 10 A 0.12 0.1 0.08 1A 85EPF.. Series TJ = 25˚C 0.06 0.04 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 8 -Recovery Time Characteristics, TJ= 25°C 4 1 0.8 85EPF.. Series TJ = 150˚C 0.6 I FM = 80 A 0.4 40 A 20 A 0.2 10 A 1A 0 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 9 - Recovery Time Characteristics, TJ= 150°C www.irf.com 85EPF.. QUIETIR Series Bulletin I2152 rev.B 12/02 14 3 Maximum Reverse Recovery Charge - Qrr (µC) Maximum Reverse Recovery Charge - Qrr (µC) 3.5 I FM = 80 A 2.5 40 A 85EPF.. Series TJ = 25 ˚C 2 20 A 1.5 10 A 1 0.5 1A 0 0 40 80 120 160 200 I FM = 80 A 85EPF.. Series TJ = 25˚C 18 40 A 16 14 20 A 12 10 10 A 8 6 4 1A 2 0 0 40 80 120 160 85EPF.. Series TJ = 150 ˚C 8 40 A 6 20 A 4 10 A 2 1A 0 0 40 80 120 160 200 Fig. 11 - Recovery Charge Characteristics, TJ= 150°C Maximum Reverse Recovery Current - Irr (A) Maximum Reverse Recovery Current - Irr (A) Fig. 10 - Recovery Charge Characteristics, TJ= 25°C 20 80 A 10 Rate Of Fall Of Forward Current - di/dt (A/µs) Rate Of Fall Of Forward Current - di/dt (A/µs) 22 12 45 85EPF.. Series TJ = 150˚C 40 35 40 A 30 20 A 25 20 10 A 15 10 1A 5 0 0 200 I FM = 80 A 40 80 120 160 200 Rate Of Fall Of Forward Current - di/dt (A/µs) Rate Of Fall Of Forward Current - di/dt (A/µs) Fig. 12 - Recovery Current Characteristics, TJ= 25°C Fig. 13 - Recovery Current Characteristics, TJ= 150°C Transient Thermal Impedance Z thJC (˚C/W) 1 Steady State Value (DC Operation) 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single Pulse 85EPF.. Series 0.01 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Charact eristics www.irf.com 5 85EPF.. QUIETIR Series Bulletin I2152 rev. B 12/02 Outline Table Case Style PowIRtabTM Dimensions in millimeters and (inches) Case Style PowIRtabTM "J" version Dimensions in millimeters and (inches) 6 www.irf.com 85EPF.. QUIETIR Series Bulletin I2152 rev.B 12/02 Ordering Information Table Device Code 85 E P F 06 J 1 2 3 4 5 6 1 - Current Rating 2 - Circuit Configuration: Base Cathode BASE 2 CATHODE CATHODE 1 Anode 3 ANODE Anode E = Single Diode 3 - Package: 4 - Type of Silicon: P = TO-247AC 5 6 65 - F = Fast Recovery 02 = 200V Voltage code: Code x 100 = VRRM (*) 04 = 400V 06 = 600V TM none=PowIRtab standard J = Short Lead Version66 (*) for higher voltage up to 1600V contact factory Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 12/02 www.irf.com 7