Bulletin I2165 06/03 QUIETIR Series 10ETF..FP FAST SOFT RECOVERY RECTIFIER DIODE VF < 1.33V @ 10A trr = 80ns VRRM 1000 , 1200V Description/ Features The 10ETF..FP fast soft recovery QUIETIR rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. The glass passivation ensures stable reliable operation in the most severe temperature and power cycling conditions. Typical applications are both: output rectification and freewheeling in inverters, choppers and converters and input rectifications where severe restrictions on conducted EMI should be met. Package Outline Major Ratings and Characteristics Characteristics IF(AV) Sinusoidal waveform 10ETF..FP Units 10 A VRRM 1000 to 1200 V IFSM 160 A 1.33 V 80 ns - 40 to 150 °C VF @ 10 A, TJ = 25°C trr @ 1A, 100A/µs TJ www.irf.com TO-220AC FULLPAK 1 10ETF..FP QUIETIR Series Bulletin I2165 06/03 Voltage Ratings Part Number VRRM , maximum VRSM , maximum non repetitive IRRM peak reverse voltage peak reverse voltage 150°C V V mA 10ETF10FP 1000 1100 4 10ETF12FP 1200 1300 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM 2 I t 10ETF..FP Units 10 Max. Peak One Cycle Non-Repetitive 160 Surge Current 185 2 Max. I t for fusing 128 A A A2s 180 2 I √t 2 Max. I √t for fusing 1800 Conditions @ TC = 95° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 2 A √s t = 0.1 to 10ms, no voltage reapplied Electrical Specifications Parameters 10ETF..FP Units VFM Max. Forward Voltage Drop 1.33 V rt Forward slope resistance 22.9 mΩ VF(TO) Threshold voltage 0.96 V IRM 0.1 Max. Reverse Leakage Current mA 4 Conditions @ 10A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VR = rated V RRM Recovery Characteristics Parameters 10ETF..FP Units Conditions trr Reverse Recovery Time 310 ns IF @ 10Apk Irr Reverse Recovery Current 4.7 A @ 25A/ µs Qrr Reverse Recovery Charge 1.05 µC S Typical Snap Factor 0.6 2 @ 25°C www.irf.com 10ETF..FP QUIETIR Series Bulletin I2165 06/03 Thermal-Mechanical Specifications Parameters 10ETF..FP Units TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient 2.5 °C/W 62 °C/W RthCS Typical Thermal Resistance, Case to Heatsink 0.5 °C/W wt Approximate Weight T Mounting Torque 2 (0.07) g (oz.) Min. 6 (5) Max. 12 (10) Kg-cm (Ibf-in) 10ETF.. Series RthJC (DC) = 2.5 ˚C/W 140 130 120 Conduction Angle 110 100 30˚ 60˚ 90 90˚ 120˚ 80 Mounting surface , smooth and greased JEDEC Maximum Allowable Case Temperature (°C) 150 180˚ 2 4 10ETF.. Series RthJC (DC) = 2.5 ˚C/W 140 130 Conduction Period 120 110 100 30˚ 60˚ 90 90˚ 120˚ 80 180˚ DC 6 8 10 0 12 2 4 6 8 10 12 14 16 18 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics 16 180° 120° 90° 60° 30° 14 12 10 RMS Limit 8 6 Conduction Angle 4 10.TF.. Series T J = 150°C 2 0 150 70 70 0 Maximum Average Forward Power Loss (W) TO-220AC FULLPAK DC operation 0 2 4 6 8 10 Ma ximum Average Forward Power Loss(W) Maximum Allowable Case Temperature (°C) Case Style Conditions 24 DC 180° 120° 90° 60° 30° 20 16 12 RMS Limit 8 Conduction Period 4 10ETF.. Series TJ = 150°C 0 0 2 4 6 8 10 12 14 16 Average Forward Current (A) Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics www.irf.com 3 10ETF..FP QUIETIR Series 180 At Any Rated Load Condition And With Rated VRRM Ap plied Following Surge. 160 Initial TJ = 150°C @60 Hz 0.0083 s @50 Hz 0.0100 s 140 120 100 80 60 10ETF.. Series 40 1 10 200 Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Bulletin I2165 06/03 Maximum Non Repetitive Surge Current VersusPulse Train Duration. 180 Initial TJ = 150°C No Voltage Reapp lied Rated VRRM Reapplied 160 140 120 100 80 60 10ETF.. Series 40 0.01 100 0.1 1 Pulse Train Duration (s) Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 6 - Maximum Non-Repetitive Surge Current Fig. 5 - Maximum Non-Repetitive Surge Current Instantaneous Forward Current (A) 1000 TJ= 25°C 100 TJ= 150°C 10 10ETF.. Series 1 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Instantaneous Forward Voltage (V) 0.6 Maximum Reverse Recovery Time - Trr (µs) Maximum Reverse Recovery Time - Trr (µs) Fig. 7 - Forward Voltage Drop Characteristics 10ETF.. Series TJ = 25 °C 0.5 0.4 0.3 I FM = 10 A 0.2 8A 5A 0.1 2A 1A 0 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/ dt (A/ µs) Fig. 8 - Recovery Time Characteristics, TJ = 25°C 4 0.8 10ETF.. Series TJ = 150 °C 0.6 0.4 I FM = 10 A 8A 0.2 5A 2A 1A 0 0 40 80 120 160 200 Rate Of Fall Of Forwa rd Current - di/ dt (A/ µs) Fig. 9 - Recovery Time Characteristics, TJ = 150°C www.irf.com 10ETF..FP QUIETIR Series 2 10ETF.. Series TJ = 25 °C 1.6 Maximum Reverse Recovery Charge - Qrr (µC) Maximum Reverse Recovery Charge - Qrr (µC) Bulletin I2165 06/03 I FM = 10 A 8A 1.2 5A 0.8 2A 0.4 0 1A 0 40 80 120 160 200 20 I FM = 10 A 8A 5A 12 2A 8 1A 4 0 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/ dt (A/ µs) Transient Thermal Impedance Z thJC (°C/W) 8A 3 5A 2 2A 1 1A 0 0 40 80 120 160 200 25 10ETF.. Series TJ = 150 °C I FM = 10 A 20 8A 15 5A 2A 10 1A 5 0 0 40 80 120 160 200 Rate Of Fall Of Forward Current - di/ dt (A/ µs) Fig. 12 - Recovery Current Characteristics, TJ = 25°C 10 I FM = 10 A 4 Fig. 11 - Recovery Charge Characteristics, TJ = 150°C Maximum Reverse Recovery Current - Irr (A) Maximum Reverse Recovery Current - Irr (A) Fig. 10 - Recovery Charge Characteristics, TJ = 25°C 16 10ETF.. Series TJ = 150 °C Rate Of Fall Of Forward Current - di/ dt (A/ µs) Rate Of Fall Of Forward Current - di/ dt (A/ µs) 10ETF.. Series TJ = 25 °C 5 Fig. 13 - Recovery Current Characteristics, TJ = 150°C D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Steady State Value (DC Operation) 1 10ETF.. Series Single Pulse 0.1 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 14 - Thermal Impedance ZthJC Characteristics www.irf.com 5 10ETF..FP QUIETIR Series Bulletin I2165 06/03 Outline Table 10.6 HOLE ø 3.4 10.4 3.1 3.2 15.8 16.0 15.4 16.4 7.1 6.7 3.7 2.8 2.6 13.7 0.9 0.7 2.54 TYP. 2.54 TYP. 0.48 0.44 2.85 2.65 1.15 1.4 1.05 13.5 3.3 3.1 10° TYP 1.3 R0.7 (2 PLACES) 4.8 4.6 R0.5 Dimensions in millimeters 5°± 0.5° 5°± 0.5° Ordering Information Table Device Code 10 E T F 12 FP 1 2 3 4 5 6 2 1 CATHODE 1 - Current Rating 2 - Circuit Configuration: 3 - 4 - 3 ANODE E = Single Diode Package: T = TO-220AC 6 Type of Silicon: F = Fast Soft Recovery Rectifier 10 = 1000V 12 = 1200V 5 - Voltage code: Code x 100 = V RRM 6 - TO-220AC FULLPAK www.irf.com 10ETF..FP QUIETIR Series Bulletin I2165 06/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 06/03 www.irf.com 7