Bulletin I2122 rev. A 07/97 SAFEIR Series 60EPS.. INPUT RECTIFIER DIODE VF < 1V @ 30A IFSM = 950A VRRM 800 to 1600V Description/Features The 60EPS.. rectifierSAFEIRseries has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150° C junction temperature. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. Major Ratings and Characteristics Characteristics Package Outline 60EPS.. Units 60 A VRRM 800 to 1600 V IFSM 950 A 1.0 V - 40 to 150 °C IF(AV) Sinusoidal waveform VF TJ @ 30A, TJ = 25°C TO-247AC (Modified) 1 60EPS.. SAFEIR Series Bulletin I2122 rev. A 07/97 Voltage Ratings VRRM , maximum peak reverse voltage VRSM , maximum non repetitive peak reverse voltage IRRM 150°C V V mA 60EPS08 800 900 1 60EPS12 1200 1300 60EPS16 1600 1700 Part Number Absolute Maximum Ratings Parameters 60EPS.. Units Conditions 60 A @ TC = 118° C, 180° conduction half sine wave IF(AV) Max. Average Forward Current IFSM Max. Peak One Cycle Non-Repetitive 950 A Surge Current 1100 I2t Max. I2t for fusing 4512 I 2√t Max. I2√t for fusing 63000 A 2√s A2s 6300 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied t = 0.1 to 10ms, no voltage reapplied Electrical Specifications Parameters 60EPS.. Units VFM Max. Forward Voltage Drop 1.07 V rt Forward slope resistance 3.96 mΩ VF(TO) Threshold voltage 0.74 V IRM 0.1 Max. Reverse Leakage Current mA 1.0 Conditions @ 60A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VR = rated VRRM Thermal-Mechanical Specifications Parameters 60EPS.. Units TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient 0.35 °C/W 40 °C/W RthCS Typical Thermal Resistance, Case to Heatsink 0.2 °C/W wt Approximate Weight T Mounting Torque Case Style 2 6 (0.21) g (oz.) Min. 6 (5) Max. 12 (10) Kg-cm (Ibf-in) TO-247AC Conditions DCoperation Mounting surface , smooth and greased JEDEC (Modified) 60EPS.. SAFEIR Series 150 60EPS.. Series RthJC (DC) = 0.35 K/W 140 130 Conduction Angle 120 90° 110 60° 120° 30° 180° 100 0 10 20 30 40 50 60 Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) Bulletin I2122 rev. A 07/97 150 60EPS.. Series RthJC (DC) = 0.35 K/W 140 Conduction Period 130 30° 60° 90° 120° 120 180° DC 110 70 0 20 Average Forward Current (A) 70 60 RMS Limit 50 40 Conduction Angle 30 20 60EPS.. Series TJ = 150°C 10 0 0 10 20 30 40 50 60 80 100 110 DC 180° 120° 90° 60° 30° 100 90 80 70 60 50 RMS Limit 40 Conduction Period 30 20 60EPS.. Series TJ = 150°C 10 0 0 70 20 40 60 80 100 Average Forward Current (A) Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics 1000 Peak Half Sine Wave Forward Current (A) Maximum Average Forward Power Loss (W) 180° 120° 90° 60° 30° 80 60 Fig. 2 - Current Rating Characteristics At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial TJ = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 900 800 700 600 500 400 60EPS.. Series 300 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current 1200 Peak Half Sine Wave Forward Current (A) Maximum Average Forward Power Loss (W) Fig. 1 - Current Rating Characteristics 90 40 Average Forward Current (A) 1000 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150°C No Voltage Reapplied Rated V RRM Reapplied 800 600 400 60EPS.. Series 200 0.01 0.1 1 Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current 3 60EPS.. SAFEIR Series Bulletin I2122 rev. A 07/97 Instantaneous Forward Current (A) 1000 100 TJ = 25°C TJ = 150°C 10 60EPS.. Series 1 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Instantaneous Forward Voltage (V) 1 Steady State Value (DC Operation) Transient Thermal Impedance Z thJC (K/W) Fig. 7 - Forward Voltage Drop Characteristics 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single Pulse 60EPS.. Series 0.01 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics 4 10 60EPS.. SAFEIR Series Bulletin I2122 rev. A 07/97 Outline Table 3. 65 ( 0.144) 15. 90 (0. 626 ) 3. 55 ( 0.139) 5. 30 (0 .20 9) DIA. 4.70 ( 0.185) 15. 30 (0. 602 ) 2.5 ( 0. 098) 1.5 ( 0. 059) 5. 70 (0 .22 5) 5.30 ( 0.208) 20.30 ( 0.800 ) 19.70 ( 0.775 ) 5.50 ( 0.217) 4. 50 (0 .17 7) 1 (2 PLCS.) 3 14. 80 ( 0.583) 4. 30 (0 .17 0) 14.20 ( 0.559 ) 3. 70 (0 .14 5) 2. 20 ( 0.087) 1. 40 (0. 056) 2. 40 ( 0.095) M AX. MAX. 1. 00 (0. 039) 0. 80 ( 0. 032) 0. 40 (0. 21 3) 10. 94 ( 0.430) 10 .86 (0 .427) Dimensions in millimeters and inches Ordering Information Table Device Code 60 E P S 16 1 2 3 4 5 BASE CATHODE 2 1 - Current Rating 2 - Circuit Configuration: 3 - Package: 4 - Type of Silicon: S = Standard Recovery Rectifier 08 = 800V 5 - Voltage code: Code x 100 = VRRM 12 = 1200V 1 CATHODE 3 ANODE E = Single Diode P = TO-247AC (Modified) 6 16 = 1600V 5