Bulletin I2161 10/01 SAFEIR Series 20ETS16, 20ETS16S INPUT RECTIFIER DIODE VF < 1V @ 10A IFSM = 300A VRRM 1600V Description/Features The 20ETS.. rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature. Package Outline Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. TO-220AC Major Ratings and Characteristics Characteristics 20ETS.. Units IF(AV) Sinusoidal waveform 20 A VRRM Range (*) 1600 V IFSM 300 A 1.0 V - 40 to 150 °C VF @ 10 A, TJ = 25°C TJ Package Outline D2 Pak (SMD-220) (*) Contact Factory Output Current in Typical Applications Single-phase Bridge Capacitive input filter TA = 55°C, TJ = 125°C, common heatsink of 1°C/W www.irf.com 16.3 Three-phase Bridge Units 21 A 1 20ETS16, 20ETS16S SAFEIR Series Bulletin I2161 10/01 Voltage Ratings Part Number VRRM, maximum VRSM , maximum non repetitive IRRM peak reverse voltage peak reverse voltage 150°C V V mA 1600 1700 1 20ETS16, 20ETS16S Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM I2t 20ETS.. Units 20 A Max. Peak One Cycle Non-Repetitive 250 Surge Current 300 Max. I2t for fusing 316 442 2 I √t 2 Max. I √t for fusing A A2s Conditions @ TC = 105° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 4420 2 A √s t = 0.1 to 10ms, no voltage reapplied 20ETS.. Units Conditions Electrical Specifications Parameters VFM Max. Forward Voltage Drop 1.1 V rt Forward slope resistance 10.4 mΩ VF(TO) Threshold voltage 0.85 V IRM 0.1 Max. Reverse Leakage Current mA 1.0 @ 20A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VR = rated VRRM Thermal-Mechanical Specifications Parameters 20ETS.. Units Conditions TJ Max. Junction Temperature Range - 40 to 150 °C Tstg Max. Storage Temperature Range - 40 to 150 °C 1.3 °C/W DC operation 62 °C/W (*) For D2Pak version 0.5 °C/W Mounting surface, smooth and greased 2 (0.07) g (oz.) Min. 6 (5) Max. 12 (10) Kg-cm (Ibf-in) RthJC Max. Thermal Resistance Junction to Case RthJA Max. Thermal Resistance Junction to Ambient RthCS Typ. Thermal Resistance Case to Heatsink wt Approximate Weight T Mounting Torque Case Style TO-220AC, D2Pak (SMD-220) * When mounted on 1" square (650mm2) PCB of FR-4 or G-10 material 4 oz (140µm) copper 40°C/W For recommended footprint and soldering techniques refer to application note # AN-994 2 www.irf.com 20ETS16, 20ETS16S SAFEIR Series 150 20ETS16 RthJC (DC) = 1.3 ˚C/W 140 130 Conduction Angle 120 110 30˚ 60˚ 100 90˚ 120˚ 180˚ 90 0 2 4 6 8 10 12 14 16 18 20 22 Maximum Allowable Case Temperature (°C) Maximum Allowable Case Temperature (°C) Bulletin I2161 10/01 150 20ETS16 RthJC (DC) = 1.3 ˚C/W 140 130 Conduction Period 120 30˚ 110 60˚ 90˚ 100 120˚ 180˚ 0 RMS Limit 15 10 Conduction Angle 20ETS16 Tj = 150˚C 5 0 0 4 8 12 16 20 24 Maximum Average Forward Power Loss (W) 20 10 15 20 25 30 35 35 DC 180˚ 120˚ 90˚ 60˚ 30˚ 30 25 20 RMS Limit 15 10 Conduction Period 20ETS16 Tj = 150˚C 5 0 0 5 10 15 20 25 Average Forward Curren t (A) Average Forward Curren t (A) Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics 300 Peak Half Sine Wave Forward Current (A) Maximum Average Forward Power Loss (W) Peak Half Sine Wave Forward Current (A) 180˚ 120˚ 90˚ 60˚ 30˚ 25 5 Average Forward Curren t (A) Fig. 2 - Current Rating Characteristics Average Forward Curren t (A) Fig. 1 - Current Rating Characteristics 30 DC 90 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150˚C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 250 200 150 100 20ETS16 50 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current www.irf.com 300 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial Tj = 150˚C 250 No Voltage Reapplied Rated Vrrm Reapplied 200 150 100 20ETS16 50 0.01 0.1 1 Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current 3 20ETS16, 20ETS16S SAFEIR Series Bulletin I2161 10/01 Instantaneous Forward Current (A) 1000 Tj = 25˚C 100 Tj = 150˚C 10 20ETS16 1 0 0.5 1 1.5 2 2.5 3 3.5 4 Instantaneous Forward Voltage (V) Transient Thermal Impedance Z thJC (K/W) Fig. 7 - Forward Voltage Drop Characteristics 10 Steady State Value (DC Operation) 1 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single Pulse 20ETS16 0.01 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics 4 www.irf.com 20ETS16, 20ETS16S SAFEIR Series Bulletin I2161 10/01 Outline Table 10.54 (0.41) MAX. 2 3.78 (0.15) 3.54 (0.14) 1.32 (0.05) 2.92 (0.11) 2.54 (0.10) TERM 2 15.24 (0.60) 14.84 (0.58) 1 1.22 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 3 14.09 (0.55) 3.96 (0.16) 13.47 (0.53) 3.55 (0.14) 2° 0.10 (0.004) 2.04 (0.080) MAX. 1.40 (0.05) 2.89 (0.11) 1.15 (0.04) 0.94 (0.04) 2.64 (0.10) 0.69 (0.03) 1 3 0.61 (0.02) MAX. 4.57 (0.18) TO-220AC Dimensions in millimeters (inches) 4.32 (0.17) 5.08 (0.20) REF. 4.69 (0.18) 4.20 (0.16) 10.16 (0.40) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 15.49 (0.61) 93° 6.18 (0.24) 14.73 (0.58) 5.28 (0.21) 2.61 (0.10) 4.78 (0.19) 2.32 (0.09) 0.55 (0.02) 8.89 (0.35) 3X REF. 1.40 (0.055) 1.14 (0.045) 2X 1 0.46 (0.02) 0.93 (0.37) MINIMUM RECOMMENDED FOOTPRINT 0.69 (0.27) 11.43 (0.45) 3 4.57 (0.18) 4.32 (0.17) 2 8.89 (0.35) 17.78 (0.70) 0.61 (0.02) MAX. 5.08 (0.20) REF. D2Pak (SMD-220) Dimensions in millimeters and inches 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X www.irf.com 5 20ETS16, 20ETS16S SAFEIR Series Bulletin I2161 10/01 Marking Information EXAMPLE: THIS IS A 20ETS16 PART NUMBER INTERNATIONAL RECTIFIER LOGO LOT CODE 1789 ASSEMBLED ON WW 19, 1997 IN THE ASSEMBLY LINE "C" DATE CODE YEAR 7 = 1997 WEEK 19 LINE C ASSEMBLY LOT CODE Tape & Reel Information TRR 1.60 (0.063) 1.50 (0.059) 4.10 (0.161) 3.90 (0.153) 1.60 (0.063) 1.50 (0.059) DIA. 0.368 (0.0145) 0.342 (0.0135) FEED DIR ECTION 1.85 (0.073) 11.60 (0.457) 11.40 (0.449) 1.65 (0.065) 15.42 (0.609) 15.22 (0.601) TRL 1.75 (0.069) 10.90 (0.429) 10.70 (0.421) 1.25 (0.049) 24.30 (0.957) 23.90 (0.941) DIA. 16.10 (0.634) 4.72 (0.186) 4.52 (0.178) 15.90 (0.626) FEED DIRECTION 13.50 (0.532) 12.80 (0.504) Dimensions in millimeters and inches DIA. 26.40 (1.039) 24.40 (0.961) SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples 360 (14.173) DIA. MAX. 6 60 (2.362) of 800 pieces per reel for both TRL and TRR. DIA . MIN. www.irf.com 20ETS16, 20ETS16S SAFEIR Series Bulletin I2161 10/01 Ordering Information Table Device Code 20 E T S 16 S TRL 1 2 3 4 5 6 7 BASE CATHODE 2 1 1 - Current Rating 2 - Circuit Configuration CATHODE 3 ANODE E = Single Diode 3 - Package 4 - Type of Silicon 5 - Voltage code: Code x 100 = VRRM 6 - S = TO-220 D2Pak (SMD-220) Version 7 - Tape and Reel Option T = TO-220AC S = Standard Recovery Rectifier 16 = 1600V (*) TRL = Left Reel TRR = Right Orientation Reel (*) Contact Factory Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 10/01 www.irf.com 7