Bulletin I2120 rev. A 07/97 SAFEIR Series 10ETS.. INPUT RECTIFIER DIODE VF < 1.1V @ 10A Description/Features IFSM = 200A The 10ETS.. rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 150°C junction temperature. The High Reverse Voltage range available allows design of input stage primary rectification with Outstanding Voltage Surge capability. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. VRRM 800 to 1600V Output Current in Typical Applications Applications Single-phase Bridge Three-phase Bridge Units Capacitive input filter TA = 55°C, TJ = 125°C common heatsink of 1°C/ W 12.0 Major Ratings and Characteristics Characteristics IF(AV) Sinusoidal waveform VRRM IFSM VF TJ @ 10 A, TJ = 25°C 16.0 A Package Outline 10ETS.. Units 10 A 800 to 1600 V 200 A 1.1 V - 40 to 150 °C TO-220AC Also available in D-pak (8EWS Series) 1 10ETS.. SAFEIR Series Bulletin I2120 rev. A 07/97 Voltage Ratings VRRM , maximum peak reverse voltage VRSM , maximum non repetitive peak reverse voltage I RRM 150°C V V mA 10ETS08 800 900 0.5 10ETS12 1200 1300 10ETS16 1600 1700 Part Number Provide terminal coating for voltages above 1200V Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current IFSM I2t 10ETS.. Units 10 A Max. Peak One Cycle Non-Repetitive 170 Surge Current 200 Max. I2 t for fusing 130 A I √t 2 Max. I √t for fusing @ TC = 105° C, 180° conduction half sine wave 10ms Sine pulse, rated VRRMapplied 10ms Sine pulse, no voltage reapplied A2s 145 2 Conditions 10ms Sine pulse, rated VRRM applied 10ms Sine pulse, no voltage reapplied 2 1450 A √s t = 0.1 to 10ms, no voltage reapplied Electrical Specifications Parameters 10ETS.. Units V FM Max. Forward Voltage Drop 1.1 V rt 20 mΩ VF(TO) Threshold voltage 0.82 V I RM 0.05 Forward slope resistance Max. Reverse Leakage Current mA 0.50 Conditions @ 10A, TJ = 25°C TJ = 150°C TJ = 25 °C TJ = 150 °C VR = rated VRRM Thermal-Mechanical Specifications Parameters 10ETS.. Units TJ Max. Junction Temperature Range - 40 to 150 °C T stg Max. Storage Temperature Range - 40 to 150 °C R thJC Max. Thermal Resistance Junction to Case R thJA Max. Thermal Resistance Junction to Ambient 2.5 °C/W 62 °C/W R thCS Typical Thermal Resistance, Case to Heatsink 0.5 °C/W wt Approximate Weight T Mounting Torque Case Style 2 2(0.07) g (oz.) Min. 6 (5) Max. 12 (10) Kg-cm (Ibf-in) TO-220AC Conditions DC operation Mounting surface , smooth and greased 10ETS.. SAFEIR Series 150 10ETS.. Series R thJC(DC) = 2.5 °C/W 140 130 Conduction Angle 120 110 100 30° 60° 90 90° 120° 180° 80 0 2 4 6 8 10 12 Maximum Allowable Case Temperat ure (°C) Maximum Allowable Case Temperature (°C) Bulletin I2120 rev. A 07/97 150 10ETS.. Series R thJC(DC) = 2.5 °C/W 140 130 Conduction Period 120 110 30° 60° 100 90° 120° 0 2 RMS Limit 8 6 4 Conduction Angle 2 10ETS.. Series T J = 150°C 0 2 4 6 8 10 Maximum Average Forward Power Loss (W) 10 8 10 12 DC 14 16 18 20 DC 180° 120° 90° 60° 30° 18 16 14 12 10 RMS Limit 8 6 Conduction Period 4 10ETS.. Series T = 150°C 2 J 0 0 2 4 6 8 10 12 14 16 Average Forward Current (A) Average Forward Current (A) Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics 200 180 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial T J = 150°C 160 @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 140 120 100 80 10ETS.. Series 60 40 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current Peak Half Sine Wave Forward Current (A) Maximum Average Forward Power Loss (W) Peak Half Sine Wave Forward Current (A) 180° 120° 90° 60° 30° 0 6 Fig. 2 - Current Rating Characteristics 16 12 4 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics 14 180° 90 240 220 200 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150 °C No Voltage Reapplied Rated VRRM Reapplied 180 160 140 120 100 80 60 40 0.01 10ETS.. Series 0.1 1 Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current 3 10ETS.. SAFEIR Series Bulletin I2120 rev. A 07/97 Instantaneous Forward Current (A) 100 T J= 25°C T J= 150°C 10 10ETS.. Series 1 0 0.5 1 1.5 2 2.5 3 Instantaneous Forward Voltage (V) Transient Thermal Impedance Z thJC (°C/W) Fig. 8 - Forward Voltage Drop Characteristics 10 D= D= D= D= D= 0.50 0.33 0.25 0.17 0.08 Steady State Value (DC Operation) 1 Single Pulse 0.1 0.0001 0.001 10ETS.. Series 0.01 0.1 1 Square Wave Pulse Duration (s) Fig. 9 - Thermal Impedance ZthJC Characteristics 4 10 10ETS.. SAFEIR Series Bulletin I2120 rev. A 07/97 Ordering Information Table Device Code 10 E T S 16 BASE CATHODE 1 2 3 4 1 - Current Rating 2 - Circuit Configuration: 5 2 E = Single Diode 3 - Package: 4 - Type of Silicon: 3 1 CATHODE ANODE T = TO-220AC 08 = 800V S = Standard Recovery Rectifier 5 - 12 = 1200V Voltage code: Code x 100 = VRRM 16 = 1600V Outline Table 10.54 (0.41) MAX. 1.32 (0.05) 3.78 (0.15) 3.54 (0.14) 2.92 (0.11) 15.24 (0.60) 1.22 (0.05) DIA. 6.48 (0.25) 6.23 (0.24) 2.54 (0.10) TERM 2 14.84 (0.58) 1 3 14.09 (0.55) 3.96 (0.16) 13.47 (0.53) 3.55 (0.14) 2° 0.10 (0.004) 2.04 (0.080) MAX. 1.40 (0.05) 2.89 (0.11) 1.15 (0.04) 2.84 (0.10) 0.94 (0.04) 0.69 (0.03) 1 4.57 (0.18) 3 0.61 (0.02) MAX. 4.32 (0.17) 5.08 (0.20) REF. Dimensions in millimeters and inches 5