Ensuring The High Availability Of Mission-Critical Data And Applications. Emerson Network Power Emerson Network Power, a business of Emerson (NYSE:EMR), is the global leader in enabling Business- Critical Continuity™ from grid to chip for telecommunication networks, data centers, health care and industrial facilities. Emerson Network Power provides innovative solutions and expertise in areas including AC and DC power and precision cooling systems, embedded computing and power, integrated racks and enclosures, power switching and controls, monitoring, and connectivity. All solutions are supported globally by local Emerson Network Power service technicians. Liebert AC power, precision cooling and monitoring products and services from Emerson Network Power deliver Efficiency Without Compromise™ by helping customers optimize their data center infrastructure to reduce costs and deliver high availability. Liebert Corporation World Headquarters 1050 Dearborn Drive P.O. Box 29186 Columbus, Ohio 43229 United States Of America 800 877 9222 Phone (U.S. & Canada Only) 614 888 0246 Phone (Outside U.S.) 614 841 6022 FAX Emerson Network Power European Headquarters Via Leonardo Da Vinci 8 Zona Industriale Tognana 35028 Piove Di Sacco (PD) Italy 39 049 9719 111 Phone 39 049 5841 257 FAX Emerson Network Power Asia Pacific 29/F, The Orient Square Building F. Ortigas Jr. Road, Ortigas Center Pasig City 1605 Philippines +63 2 687 6615 +63 2 730 9572 FAX liebert.com Technical Support 800 288 6169 Toll-Free 607 721 8840 Phone 607 722 8713 Fax While every precaution has been taken to ensure accuracy and completeness in this literature, Liebert Corporation assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. © 2010 Liebert Corporation. All rights reserved throughout the world. Specifications subject to change without notice. All names referred to are trademarks or registered trademarks of their respective owners. ® Liebert and the Liebert logo are registered trademarks of the Liebert Corporation. SL-22005 (R01/10) Emerson Network Power. The global leader in enabling Business-Critical Continuity™. Printed in USA EmersonNetworkPower.com AC Power Embedded Computing Outside Plant Racks & Integrated Cabinets Connectivity Embedded Power Power Switching & Controls Services DC Power Monitoring Precision Cooling Surge Protection Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2010 Emerson Electric Co. Surge Protection For Business-Critical Continuity™ Liebert SI Series Surge Protective Device Setting The Standard For Facility-Wide Protection The Capacity To Handle The Surges; The Footprint That Saves You Space Today’s businesses demand more protection from their surge protective devices. A power disturbance can strike at any time, causing a loss of data, productivity and money. Customers require systems that will consistently provide clean power and safeguard their equipment from the substantial costs of power disturbances. Features Built-In-Testing - The Liebert SI Series (Interceptor) comes equipped with a built-in testing circuit that monitors MOV/fuse link status. The built-in testing can be operated by the simple push of a button on the display panel, and testing can occur at any voltage within the continuous operating voltage range, even during a transient event. No other surge manufacturer offers this monitoring capability as a standard feature. Precise Current Sharing Assures Performance and Long Life - High Energy current diversion is handled by a sophisticated parallel system of computer matched, custom metal-oxide varistor (MOV) array. Protection From Extreme Voltage Conditions - Individual component-level fusing coordinates to ensure each unit is safeguarded. Lowest Clamping Voltages - through use of low impedance copper conduction plates. Real-time Status Indication - internal and external LED’s, audible alarms and Form C contacts activate when protection is reduced or phase loss/undervoltage conditions are detected. Best-in-Class Capacitive Filtering - for excellent ringwave transient attenuation. Test Data Package - Available for surge current capacity, life cycle, EMI/ RFI noise rejection, fault interrupt current and industry safety approvals. ANSI/UL 1449 Third Edition Listed for Type 1 installations. 10-Year Warranty for parts and 5-Year on-site labor. 2 Tested Suppression Voltages (without disconnect/with disconnect) Liebert SI Series 160kA - 1000kA. Connection Type Parallel Connected Agency Listings ANSI/UL 1449 Third Edition, UL 1283 (Type 2 Locations), cUL, FCC Part 15 Class B Operating Voltage Range +/- 15% Fault Current Rating (AIC) 200kAIC Location Type Type 1 Nominal Discharge Current (In) 20kA Operating Frequency Range 47 - 63 Hertz 50 ohm EMI/RFI Attenuation 63 dB max from 10kHz to 100MHz Protection Modes All applicable modes standard (Line to Neutral, Line to Ground, Neutral to Ground and Line to Line) Response Time <0.5 nanoseconds Temperature -40 to +60 degrees C Operating Humidity 0% to 95% noncondensing Status Indication LEDs, Dry Contacts, Audible Alarm Enclosure NEMA 4 standard Altitude 0 to 18,000 feet Audible Noise Less than 45 dBa Warranty 10-Years Parts and 5-Years On-Site Labor System B3 6kv/500A B3/C1 C3 Voltage Mode Ringwave Comb. Wave Comb. Wave Comb. Wave 120/208 L-N 328/344 308/312 376/376 452/536 120/208 L-G 340/348 320/316 364/368 444/584 120/208 L-L 464/448 576/568 680/652 792/832 120/208 N-G 344 284 344 468 277/480 L-N 520/536 532/528 800/800 912/952 277/480 L-G 736/760 688/688 760/776 840/896 277/480 L-L 736/776 720/728 1480/1416 1656/1600 277/480 N-G 736 648 760 896 ANSI/UL 1449 Third Edition - Voltage Protection Ratings (VPRs) System Voltage 120/240 120/208 240 230/400 277/480 480 L-N L-G N-G L-L 700V 700V 700V 1000V N/A 1200V N/A 1000V 1000V 1200V 1000V 1800V N/A 1800V N/A 1800V How To Specify The Appropriate Model: Use Chart A to build your Liebert SI starting with the Surge Rating column. Moving left to right, choose the correct configurations from each column for your application. Your completed model number should look similar to the example below or SI016120YARDE. Refer to Chart B for Liebert SI dimensional data. Chart A – Liebert SI Series Model Selection SI SI Series Code SI EXAMPLE 0 1 6 1 2 0 Y A R D E Choose Surge Current Rating Choose Voltage (L-G) Choose Voltage Configuration Choose Modes of Protection Choose Type of Connection Choose Monitoring Option Choose Enclosure Type Code 016 160kA 025 250kA 032 320kA 040 400kA 050 500kA 060 600kA 075 750kA 100 1000kA Code Code Code Code Code Code 120 120V N 1 Phase L-N 2+W+GND A All N Wire Lugs S E NEMA 4 Standard Monitoring LEDs, Audible Alarm, 208 208V L 1 Phase L-L 2W +GND R Disconnect N Caseless *Other modes Form C Contacts of protection 220 220V S Split Phase 3W+GND *Other enclosure available; Call C Standard Monitoring options available; 230 230V Y 3 Phase Wye 4W+GND factory. Plus Single Surge Call factory. 240 240V D 3 Phase Delta 3W+GND Counter 277 277V X 3 Phase Wye 3W+GND D Standard Monitoring 480 480V H 3 Delta Hi-Leg 4W+GND Plus Dual Surge and Swell Counters F Chart B – Liebert SI Series Dimensional Data Surge 160kA 250kA 320kA 500kA 600kA 750kA 1,000kA Connection Wire lugs Disconnect Wire lugs Disconnect Wire lugs Disconnect Wire lugs Disconnect A 16 16 16 16 20 20 20 20 B 12 16 12 16 16 20 20 24 C 9 9 9 9 9 9 9 9 D 17.25 17.25 17.25 17.25 21.25 21.25 21.25 21.25 E 9.5 10 9.5 10 10 14 14 18 F Weight 0.44 35 0.44 45 0.44 45 0.44 55 0.44 55 0.44 85 0.44 85 0.44 95 AD E B C 3