Download Databrief

STEVAL-ISA129V1
16 V - 280 mA non isolated off-line high voltage converter based on
the VIPer16
Data brief
reach very low standby consumption (< 50 mW at
265 Vac), while in the latter the IC is supplied by
an internal current generator, thus eliminating the
cost of the transformer auxiliary winding.
• Protection features available include thermal
shutdown with hysteresis and delayed
overload protection.
Features
• Input voltage range VIN: 90 VRMS - 265 VRMS
• Output voltage VOUT: 16 V
• Max output current IOUT: 0.28 A
• Precision of output regulation VOUT_LF: ±5%
• High frequency output voltage ripple VOUT_HF:
50 mV
• Max ambient operating temperature TA: 60 °C
• RoHS compliant
Description
The STEVAL-ISA129V1 demonstration board is a
16 V - 280 mA application set in non isolated
flyback topology using the VIPer16, a new off-line
high voltage converter by STMicroelectronics.
The VIPer16 features an 800 V avalanche rugged
power section, PWM operation at 115 kHz with
frequency jittering for lower EMI, limiting current
with adjustable set point, on-board soft-start, and
safe auto-restart after a fault condition.
Moreover, the VIPer16 can work with or without
the auxiliary winding. In the former case, it can
April 2013
DocID024567 Rev 1
For further information contact your local STMicroelectronics sales office.
1/4
www.st.com
4
Schematic diagram
1
STEVAL-ISA129V1
Schematic diagram
Figure 1. STEVAL-ISA129V1 circuit schematic
$&, 1
'
/
7
5
&
&
'
&
'
'
/
9287
&
'
5
'
-
-
&203
/,0
9,3 (5+1
9''
'5 $,1
&
&21752/
5
&
*1'
)%
5
5
&
'
&
&
5D
5E
2/4
DocID024567 Rev 1
5
&
&
STEVAL-ISA129V1
2
Revision history
Revision history
Table 1. Document revision history
Date
Revision
16-Apr-2013
1
Changes
Initial release.
DocID024567 Rev 1
3/4
STEVAL-ISA129V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT AUTHORIZED FOR USE IN WEAPONS. NOR ARE ST PRODUCTS DESIGNED OR AUTHORIZED FOR USE
IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH
PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR
ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED
FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN
WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE,
AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS.
PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE
CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
DocID024567 Rev 1