Data sheet... RSSD RS SD9S UNC 4.40 LP2N Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: • Group with 9-, 15-, 37- and 50-pole male and female connectors. • One-to-one electrical connection between controller and field connections. • Extremely compact modules for attachment to standard TS35 or TS32 rail. General ordering data Order No. Type Version GTIN (EAN) Qty. 8003901001 RS SD9S UNC 4.40 LP2N Interface, RSSD, SUB-D plug, in compliance with IEC 807-2 / DIN 41652, 9-pole plug, Screw 4032248047291 1 pc(s). Creation date September 11, 2012 1:37:48 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 1 Data sheet... RSSD RS SD9S UNC 4.40 LP2N Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions Length Height 45 mm 76 mm Width Net weight 87 mm 102 g 0...+55°C Storage temperature -40...+70 °C Temperatures Operating temperature Connection Data Connection on control side Connection (field side) SUB-D plug, in compliance with IEC 807-2 / DIN 41652 LP2N 5.08mm Number of poles (control side) Earthing 9-pole plug No Rated current per connection 1.5 A DIN EN 50178 II 0.8 kV Rated insulation voltage Pollution severity level 100 V 2 Screw 6 mm² 6 mm² 4 mm² 2.5 mm² 0.13 mm² 0.5 mm² 0.5 mm² 0.5 mm² 0.5 mm² Clamping range, min. Solid, min. H05(07) V-U Flexible, min. H05(07) V-K Flexible with sleeve, min. Flexible with sleeve, min. Wire connection cross-section min. AWG Tightening torque, min. Stripping length ETIM 3.0 eClass 4.1 eClass 6.0 Rating data Rated voltage 100 V Insulation coordination (EN50178) According to Surge voltage category Pulse voltage test (1,2/50μs) Connection field Type of connection Clamping range, max. Solid, max. H05(07) V-U Flexible, max. H05(07) V-K Flexible with sleeve, max. Sleeve with plastic collar, max. Wire connection cross-section max. AWG Tightening torque, max. 2.5 mm² AWG 12 0.6 Nm AWG 26 0.5 Nm 6 mm Classifications ETIM 2.0 UNSPSC eClass 5.1 eClass 7.0 EC001419 30-21-18-01 27-24-22-04 27-24-22-04 EC001419 27-24-04-04 27-24-22-04 Notes Notes The figure shows a generic product on offer. Approvals Approvals Creation date September 11, 2012 1:37:48 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 2 Data sheet... RSSD RS SD9S UNC 4.40 LP2N Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date September 11, 2012 1:37:48 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 3