Data sheet... SAK terminal with screw connection STL 5/EN Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com The comprehensive range of bolt-type screw terminals offers secure connections for all power transmission applications. Connections from 10 mm² to 300 mm² are possible. The conductors are attached to the terminals using crimped cable lugs and each connection secured by tightening the hexagonal nut. Bolt-type screw terminals with threads from M5 to M16 can be used depending on the conductor cross-section. A low voltage drop and the use of a self-extinguishing material with a V-0 (UL 94) flammability rating guarantee maximum safety. All bolt-type screw terminals have been tested according to international railway standards (EN 50343, EN 50155, NF F61-017, NF16-101; Ria 20) and comply with the requirements of those standards. General ordering data Order No. Type Version GTIN (EAN) Qty. 0448460000 STL 5/EN SAK terminal with screw connection, Stud terminal, Rated cross-section: 16 mm², Screw connection 4008190519834 20 pc(s). Creation date September 11, 2012 12:48:14 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 1 Data sheet... SAK terminal with screw connection STL 5/EN Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions Length Height Net weight 54.5 mm 47.5 mm 24.51 g Width Height of lowest version -50 °C Storage temperature Continuous operating temp., max. No Open Stud terminal Number of similar terminals Type of mounting 1 Clamped Screw connection 2 Nm Connection direction Tightening torque, max. on side 3 Nm 16 mm² 8 kV 3 Rated voltage Rated current 800 V 76 A 2 Nm M5 Tightening torque, max. 3 Nm Wemid V-0 Colour Dark beige SAK terminal with screw connection on side 1 TS 32, TS 35 Type of connection Number of levels Levels cross-connected internally End cover plate required Screw connection 1 No Yes EC000897 27-14-11-20 UNSPSC eClass 7.0 30-21-18-01 27-14-11-20 16.4 mm 47.1 mm Temperatures Operating temperature Continuous operating temp., min. 120 °C Additional technical data Explosion-tested version Open sides Version Clampable wires (rated connection) Type of connection Tightening torque, min. Rated data Rated cross-section Rated impulse withstand voltage Pollution severity Stud connection Tightening torque, min. Stud size for spade connection Material data Material UL 94 flammability rating System specifications Product family Connection direction No. of clamping points per level Mounting rail Classifications ETIM 3.0 eClass 6.0 Creation date September 11, 2012 12:48:15 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 2 Data sheet... SAK terminal with screw connection STL 5/EN Technical data Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Approvals Approvals Creation date September 11, 2012 12:48:15 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 3