Data sheet... SAK terminal test-disconnect terminal SAKA 10 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Special instruments are required for measuring electrical energy. One wrong connection during maintenance work is enough to ruin a current transformer! Disconnect test terminals represent a reliable way of solving this problem. As a leading supplier of line connectors, Weidmüller has developed special disconnect test terminals in close cooperation with users. These modular terminals ensure optimum realisation of all important circuits for the measurement of current, voltage and energy.Different current transformer circuits, e.g. for replacing measuring instruments or electricity meters, can be implemented. General ordering data Order No. Type Version GTIN (EAN) Qty. 0134120000 SAKA 10 SAK terminal test-disconnect terminal, Disconnect and modular disconnect terminal, Rated crosssection: 10 mm², Screw connection, KrG, Medium yellow, Direct mounting 4008190083380 25 pc(s). Creation date September 11, 2012 12:28:09 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 1 Data sheet... SAK terminal test-disconnect terminal SAKA 10 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions Length Height Net weight 82 mm 55.5 mm 63.28 g Width Height of lowest version -60 °C Storage temperature Continuous operating temp., max. No 1 Snap-on Installation advice Open sides Direct mounting right 12400-189 600 V 35 A 5A 18 AWG Voltage size B (CSA) Voltage size D (CSA) Current size C (CSA) Wire cross section max. (CSA) 600 V 600 V 35 A 8 AWG Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max. 12 mm 55.5 mm Temperatures Operating temperature Continuous operating temp., min. 130 °C Additional technical data Explosion-tested version Number of similar terminals Type of mounting CSA ratings data Certificate No. (CSA) Voltage size C (CSA) Current size B (CSA) Current size D (CSA) Wire cross section min. (CSA) Clampable wires (additional connection) Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, min. 0.5 mm² 10 mm² Clampable wires (rated connection) Type of connection Screw connection Blade size 1.0 x 5.5 mm Number of connections 2 Clamping range, rated connection, max. 10 mm² Tightening torque, min. 1.2 Nm Torque level with DMS electric screwdriver 4 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross section, finely stranded, max. 10 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. 1.5 mm² Wire connection cross section AWG, min. AWG 18 Stripping length Connection direction Clamping range, rated connection, min. Clamping screw Tightening torque, max. Gauge to IEC 60947-1 12 mm on side 0.5 mm² M4 2.4 Nm B6 Wire connection cross section, solid core max. rated connection 10 mm² Wire connection cross section, stranded, rated connection, max. 10 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 10 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 10 mm² Wire connection cross section AWG, max. AWG 8 Creation date September 11, 2012 12:28:09 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 2 Data sheet... SAK terminal test-disconnect terminal SAKA 10 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Disconnect terminals Integral test socket Tightening torque, min. Tightening torque, max. Torque level with DMS electric screwdriver 2.4 Nm 10 mm² 6 kV 47 A 3 Rated voltage Rated current Standards 500 V 47 A IEC 60947-7-1 KrG Beige Material UL 94 flammability rating KrG V-0 SAK terminal testdisconnect terminal on side 2 No Type of connection Number of levels No. of clamping points per level End cover plate required EC000897 30-21-18-11 27-14-11-26 27-14-11-26 ETIM 3.0 eClass 4.1 eClass 6.0 Yes 1.2 Nm 4 Rated data Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity Material data Insulating material Colour System specifications Product family Connection direction Number of connections Levels cross-connected internally Screw connection 1 2 Yes Classifications ETIM 2.0 UNSPSC eClass 5.1 eClass 7.0 EC000897 27-14-11-26 27-14-11-26 Product information Descriptive text technical data Product description 10 mm² stranded can be connected with 2 Nm tightening torque. Without StB Approvals Approvals Creation date September 11, 2012 12:28:09 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 3