Data sheet... SAK terminal with screw connection SAKG 40 II Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com The Weidmüller SAKG range includes the following connection types: • Combined clamping yoke/flat-blade connection, version I • Flat spade connection, version II. Here, two types of cable glands are intended: a) screw set with lock nut b) with threads on the busbar clamping yoke connection, version III. The stripped conductor can be connected without any further preparation. General ordering data Order No. Type Version GTIN (EAN) Qty. 0170520000 SAKG 40 II SAK terminal with screw connection, Special terminal, Rated cross-section: 95 mm², Screw connection, KrG, Medium yellow 4008190049911 10 pc(s). Creation date September 11, 2012 12:14:23 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 1 Data sheet... SAK terminal with screw connection SAKG 40 II Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions Length Height Weight 90 mm 53 mm 242.4 g Width Height of lowest version Net weight 46 mm 53 mm 236 g -60 °C Storage temperature Continuous operating temp., max. 130 °C No Open Stud terminal Number of similar terminals Type of mounting 1 Snap-on 12400-119 250 A 00 AWG Voltage size C (CSA) Wire cross section max. (CSA) 600 V 0000 AWG on side 10 mm² M 10 20 Nm Connection direction Clamping range, rated connection, min. Clamping screw Tightening torque, max. Wire connection cross section AWG, min. Rated voltage Rated current Standards 1,000 V 232 A IEC 60947-7-1 Voltage size C (UR) 600 V Conductor size Factory wiring max. (UR) 0000 AWG Conductor size Field wiring max. (UR) 0000 AWG Material UL 94 flammability rating Temperatures Operating temperature Continuous operating temp., min. Additional technical data Explosion-tested version Open sides Version CSA ratings data Certificate No. (CSA) Current size C (CSA) Wire cross section min. (CSA) Clampable wires (rated connection) Type of connection Number of connections Clamping range, rated connection, max. Tightening torque, min. Wire connection cross section, solid core max. rated connection Wire connection cross section AWG, max. Screw connection 1 95 mm² 10 Nm 16 mm² AWG 4/0 AWG 20 Rated data Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity 95 mm² 8 kV 232 A 3 UL ratings data Certificate No. (UR) E60693VOL1SEC2 Current size C (UR) 230 A Conductor size Factory wiring min. (UR) 1 AWG Material data Insulating material Colour KrG Beige KrG V-0 Creation date September 11, 2012 12:14:23 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 2 Data sheet... SAK terminal with screw connection SAKG 40 II Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data System specifications Product family Connection direction Number of connections Levels cross-connected internally End cover plate required SAK terminal with screw connection on side 1 No Yes Type of connection Number of levels No. of clamping points per level Mounting rail EC000897 30-21-18-11 27-14-11-31 27-14-11-20 ETIM 3.0 eClass 4.1 eClass 6.0 Screw connection 1 2 TS 32 Classifications ETIM 2.0 UNSPSC eClass 5.1 eClass 7.0 EC000897 27-14-11-31 27-14-11-20 Product information Descriptive text technical data Conductor connection with cable lugs according to DIN 46234, from 10 .. 95 mm² Approvals Approvals Creation date September 11, 2012 12:14:23 PM CEST Catalogue status 23.07.2012 / We reserve the right to make technical changes. 3