OM7628NM HERMETIC SURFACE MOUNT ADJUSTABLE POSITIVE VOLTAGE REGULATOR Three Terminal, Adjustable Voltage, 3.0 Amp Precision Positive Regulator In Hermetic Surface Mount Package FEATURES • • • • • • Hermetic Surface Mount Package Reference Voltage Set To ±2% Built-In Thermal Overload Protection Short Circuit Current Limiting Product Is Available Hi-Rel Screened Electrically Similar To Industry Standard Type LM150A DESCRIPTION These three terminal positive regulators are supplied in a hermetically sealed surface mount package. All protective features are designed into the circuit including thermal shutdown, current limiting and safe-area control. With heat sinking, they can deliver over 3.0 amps of output current. These units feature 2% initial voltage tolerance, with 0.3% load regulation and .01% line regulation. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage Differential. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +35 V Operating Junction Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C Typical Power/Thermal Characteristics: Rated Power @ 25°C TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25W TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3W Thermal Resistance: θJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5°C/W θJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42°C/W Lead Temperature at Case (5 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225°C PIN CONNECTION MECHANICAL OUTLINE .015 .500 1 .075 .075 2 .157 .030 MIN. Pin 1: Adjust Pin 2: VIN 3 .625 .415 Pin 3: VOUT .062 TOP VIEW 4 11 R1 Supersedes 1 05 R0 3.5 .140 .140 .140 3.5 - 117 SIDE VIEW .375 BOTTOM VIEW OM7628NM ELECTRICAL CHARACTERISTICS Test Reference Voltage Symbol VREF -55°C ≤ TA ≤ 125°C (Note 1) unless otherwise specified Conditions IOUT = 10mA Limits Unit Min. Max. 1.20 1.30 V 1.20 1.30 V 0.01 %/V 0.05 %/ 17.5 mV 50 mV 0.35 % 1.0 % 0.01 %/W TA = 25°C 3.0V ≤ (VIN - VOUT) ≤ 35V, P ≤ 30W 10mA ≤ IOUT ≤ 3.0A (Note 2) Line Regulation ∆VOUT (Note 2) ∆VIN 3.0V ≤ (VIN - VOUT) ≤ 35V, IOUT = 10mA, TJ = 25°C 3.0V ≤ (VIN - VOUT) ≤ 35V, IOUT = 10mA Load Regulation ∆VOUT 10mA ≤ IOUT ≤ 3.0A, (Note 2) ∆IOUT VOUT ≤ 5.0A, TJ = 25°C 10mA ≤ IOUT ≤ 3.0A, VOUT ≤ 5.0A 10mA ≤ IOUT ≤ 3.0A, VOUT ≥ 5.0A, TJ = 25°C 10mA ≤ IOUT ≤ 3.0A, VOUT ≥ 5.0A Thermal Regulation 20ms pulse, TA =25°C Ripple Rejection ∆VIN (Note 3) ∆VREF Adjust Pin Current IAdj Adjust Pin ∆IAdj Current Change VOUT = 10V, f = 120Hz 66 dB CADJ = 10µF 10mA ≤ IOUT ≤ 3.0A, IOUT = 10mA 100 µA 5.0 µA 5.0 mA 3.0V ≤ (VIN - VOUT) ≤ 35V Miminum Load Current IMIN (VIN - VOUT) = 35V Current Limit ICL (VIN - VOUT) ≤ 10V 3.0 A (VIN - VOUT) = 30V 0.3 A Notes: 1. Unless otherwise specified, these specifications apply for (VIN - VOUT) = 5.0V and IOUT = 1.5A. Although power dissipation is internally limited, these characteristics are applicable for power dissipation up to 30W. 2. Regulation is measured at a constant junction temperature using a pulse technique. Changes in output voltage due to heating effects are covered under the specification for thermal regulation. 3. Guaranteed if not tested to the limits specified. 3.5