Product Overview CAT874: Switch Controller For complete documentation, see the data sheet Product Description CAT874 is a switch controller designed to start/shut-off smart phones with the push button input or by phone microcontroller unit. CAT874 monitors two inputs and outputs an active high output after PWR_ON input has been active (logic low) or a factory preset minimum time. Releasing input from its active state before the minimum timeout period resets the internal timer and must return to being active before the timer will restart with a fresh count down. The output remains high until the next PWR_ON high-to-low or VCHG low-to-high transition. CAT874's push pull output is capable of sinking up to 3 mA of current. Features • • • • • Operate on 1.8 V to 5.5 V Power Supplies Ultra Low Quiescent Current: 100 nA (typical) Schmitt Trigger Inputs Small ULLGA-6 Package: 1.45 x 1.0 x 0.4 mm These Devices are Pb-free, Halogen Free/BFR Free and are RoHS Compliant Applications • • • • Mobile Phones PDAs MP3 Players Personal Navigation Devices Part Electrical Specifications Product Compliance Status Voltages Monitored VCC Max (V) V(TO) Typ (V) IQ Typ (µA) Reset Active State Reset Timer Manual Reset Watchdog Timer Package Type CAT874-80ULGT3 Pb-free Active 1 5.5 - 0.1 High Yes Yes No ULLGA-6 Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016