Pr el im in ar y Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com Pr el im in ar y THIS PAGE INTENTIONALLY LEFT BLANK HMC392A v00.1115 Typical Applications Features The HMC392A is ideal for: Gain: 15.5 dB • Point-to-Point Radios Noise Figure: 2.4 dB • VSAT Single Supply Voltage: +5V 50 Ohm Matched Input/Output • LO Driver for HMC Mixers 3 No External Components Required • Space Small Size: 1.3 x 1.0 x 0.1 mm Functional Diagram General Description y • Military EW, ECM, C I The HMC392A is a GaAs MMIC Low Noise Amplifi er die which operates between 3.5 and 7.0 GHz. The amplifi er provides 15.5 dB of gain, 2.4 dB noise fi gure, and 28 dBm IP3 from a +5V supply voltage. The HMC392A has six bonding adjustment options which allow the user to select the bias point and output power of the device (+15 to +18 dBm). The HMC392A a m p l i f i e r can easily be integrated into M u l t i - C h i p - Modules (MCMs) due to its small (1.3 mm2) size. All data is with the chip in a 50 Ohm test fi xture connected via 0.025mm (1 mil) diameter wire bonds of minimal length 0.31mm (12 mils). in ar im Pr el LOW NOISE AMPLIFIERS - CHIP 1 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz Electrical Specifi cations, TA = +25° C, Vdd = 5V Parameter Min. Frequency Range Gain Typ. Max. Min. 4.0 - 6.0 13 Typ. Max. 3.5 - 7.0 GHz 15.5 19 14 19 dB 0.018 0.025 0.018 0.025 dB/ °C Noise Figure 2.4 3.0 2.8 3.4 dB Input Return Loss 15 10 Output Return Loss 15 10 dB 16 dBm 18 dBm Gain Variation Over Temperature Output Power for 1 dB Compression (P1dB) 13 Saturated Output Power (Psat) Output Third Order Intercept (IP3) 16 11.5 Units 12 18 25 Supply Current (Idd) 28 50 23 66 dB 28 50 dBm 66 mA Note: Data taken with pads PS4 and PS8 bonded to ground (state 5) unless otherwise noted. 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC392A v00.1115 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz Absolute Maximum Ratings 7 Vdc RF Input Power (RFIN)(Vdd = +5 Vdc) +11 dBm Channel Temperature 175 °C Continuous Pdiss (T= 85 °C) (derate 7.1 mW/°C above 85 °C) 0.64 W Thermal Resistance (channel to die bottom) 140 °C/W Storage Temperature -65 to +150 °C Operating Temperature -55 to +85° C Idd (mA) +4.5 49 +5.0 50 +5.5 51 Pr el im in ar y (State 5 Depicted) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing Vdd (Vdc) LOW NOISE AMPLIFIERS - CHIP Drain Bias Voltage (Vdd) 2 Typical Supply Current vs. Vdd NOTES: 1. ALL DIMENSIONS IN INCHES [MILLIMETERS] 2. ALL TOLERANCES ARE ±0.001 (0.025) 3. DIE THICKNESS IS 0.004 (0.100) BACKSIDE IS GROUND 4. BOND PADS ARE 0.004 (0.100) SQUARE 5. BOND PAD SPACING, CTR-CTR: 0.006 (0.150) 6. BACKSIDE METALLIZATION: GOLD 7. BOND PAD METALLIZATION: GOLD For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 2