Product Overview MC100EPT622: Translator, 10-bit LVTTL / LVCMOS to LVPECL For complete documentation, see the data sheet Product Description The MC100EPT622 is a 10-Bit LVTTL/LVCMOS to LVPECL translator. Because LVPECL (Positive ECL) levels are used, only +3.3 V and ground are required. The device has an OR-ed enable input which can accept either LVPECL (ENPECL) or TTL/LVCMOS inputs (ENTTL). If the inputs are left open, they will default to the enable state. The device design has been optimized for low channel-to-channel skew. Features • • • • • • • 450 ps Typical Propogation Delay Maximum Frequency > 1.5 GHz Typical PECL Mode Operating Range: VCC = 3.0 V to 3.8 V with VEE = 0 V PNP LVTTL Inputs for Minimal Loading Q Outputs Will Default HIGH with Inputs Open The 100 Series Contains Temperature Compensation Part Electrical Specifications Product Compliance Status Channels Input Level Output Level VCC Typ (V) fMax Typ (MHz) tpd Typ (ns) tR & tF Max (ps) Package Type MC100EPT622FAG Pb-free Active 10 CMOS ECL 3.3 1500 0.5 450 LQFP-32 ECL 3.3 1500 0.5 450 LQFP-32 ECL 3.3 1500 0.5 450 QFN-32 ECL 3.3 1500 0.5 450 QFN-32 Halide free MC100EPT622FAR2G Pb-free TTL Active 10 Halide free MC100EPT622MNG Pb-free TTL Active 10 Halide free MC100EPT622MNR4 G Pb-free Halide free CMOS TTL CMOS Active 10 TTL CMOS For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016