Product Overview MC14504B: Hex Level Shifter For complete documentation, see the data sheet Product Description The MC14504B is a hex non-inverting level shifter using CMOS technology. The level shifter will shift a TTL signal to CMOS logic levels for any CMOS supply voltage between 5 and 15 volts. A control input also allows interface from CMOS to CMOS at one logic level to another logic level: Either up or down level translating is accomplished by selection of power supply levels VDD and VCC. The VCC level sets the input signal levels while VDD selects the output voltage levels. Features • • • • • • • UP Translates from a Low to a High Voltage or DOWN Translates from a High to a Low Voltage Input Threshold Can Be Shifted for TTL Compatibility No Sequencing Required on Power Supplies or Inputs for Power Up or Power Down 3 to 18 Vdc Operation for VDD and VCC Diode Protected Inputs to VSS Capable of Driving Two Low-Power TTL Loads or One Low-Power Schottky TTL Load Over the Rated Temperature Range Pb-Free Packages are Available* Part Electrical Specifications Product MC14504BDG Compliance Status Channels Pb-free Active 1 Halide free MC14504BDR2G Pb-free Pb-free Active 1 Pb-free Active 1 AEC Qualified tpd Max (ns) IO Max (mA) Package Type TTL 18 340 2.25 SOIC-16 3 18 340 2.25 SOIC-16 3 18 340 2.25 TSSOP-16 3 18 340 2.25 TSSOP-16 3 18 340 2.25 SOIC-16 3 18 340 2.25 SOIC-16 3 18 340 2.25 TSSOP-16 3 18 340 2.25 TSSOP-16 CMOS TTL CMOS Active 1 Halide free NLV14504BDG VCC Max (V) 3 TTL Halide free MC14504BDTR2G VCC Min (V) CMOS Halide free MC14504BDTG Input Level CMOS TTL Active 1 TTL CMOS PPAP Capable Pb-free Halide free NLV14504BDR2G AEC Qualified Active 1 TTL CMOS PPAP Capable Pb-free Halide free NLV14504BDTG AEC Qualified Active 1 TTL CMOS PPAP Capable Pb-free Halide free NLV14504BDTR2G AEC Qualified Active 1 CMOS TTL PPAP Capable Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016