Product Overview NCN6001: Smart Card Interface For complete documentation, see the data sheet Product Description The NCN6001 is an integrated circuit dedicated to the smart card interface applications. The device handles any type of smart card through a simple and flexible micro controller interface. On top of that, thanks to the built in chip select pin, several couplers can be connected in parallel.The device is particularly suited for low cost, low power applications,with high extended battery life coming from extremely low quiescent current. Features • • • • • • • • • • 100% compatible with ISO 7816-3, EMV and GIE-CB standards Fully GSM Compliant Wide battery supply voltage range : 2.7 < Vcc < 5.5V Programmable CRD_VCC supply handles 1.8V, 3V or 5V card operation. Programmable rise and fall card clock slopes Programmable card clock divider Built-in Chip Select logic allows parallel coupling operation ESD protection on card pins ( 8 kV, Human Body Model ) Supports up to 40 MHz input Clock Built-in programmable CRD_CLK stop function handles Run or Low state. For more features, see the data sheet Applications End Products • E-commerce interface • POS / ATM • Pay TV Part Electrical Specifications Product NCN6001DTBR2G Compliance Status VCC Min (V) VCC Max (V) IT Typ (mA) II(standby) Max (µA) fClock Max (MHz) Package Type Pb-free Active 2.7 6 0.5 60 40 TSSOP-20 Halide free Application Diagram For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016