Product Overview NLSV4T3234: 4-Bit Dual Supply Bus Buffer Translator w/ 26 Ohm Output Series Resistor For complete documentation, see the data sheet Product Description The NLSV4T3234 is a 4-bit configurable dual-supply bus buffer level translator. The input (B-) and output (A-) ports are designed to track two different power supply rails, VCCB and VCCA respectively. Both supply rails are configurable from 0.9V to 4.5V allowing universal low-voltage translation from the input (B-) to the output (A-) port. Features Benefits • Wide VCCA and VCCB Operating Range • High-Speed w/ Balanced Propagation Delay: 2.4 ns max at 3.0 to 3.6 V • 26 Series Resistors at Output (A-) Ports 26 Series Resistors at Output (A-) Ports • Inputs OVT to 4.5 V • Non-preferential VCC Sequencing • Outputs at 3-State until Active VCC is reached • Power-Off Protection • Ultra-Small packaging: 1.41 mm x 2.04 mm FlipChip11 Applications • Allows customers to translate between : 0.9 V to 4.5 V • Minimizes skew between channels • Reduces ground bounce • Vcc can be lower than input voltage without damage to device • Easier to implement design • Minimizes power consumption while device is in sleep mode • When Vcc goes to Zero and power is still applied to I/O there is no risk of damage to device • Reduces the PCB board space requirment (Great for handheld applications) End Products • Low Voltage translation within 0.9V - 4.5V • System integration for different power requirements • Mobile Phones, PDAs, Notebooks, Other Portable Devices • PDAs • Notebook Computers Part Electrical Specifications Product Compliance Status Channels Input Level VCC Min (V) VCC Max (V) tpd Max (ns) IO Max (mA) Package Type NLSV4T3234FCT1G Pb-free Active 4 CMOS 0.9 4.5 5.6 50 Flip-Chip-10 Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016