Product Overview NLSX0102: 2-Bit 20 Mb/s Dual-Supply Level Translator For complete documentation, see the data sheet Product Description The NLSX0102 is a 2-bit configurable dual-supply bidirectional auto sensing translator that does not require a directional control pin. The IO VCC and IO VL ports are designed to track two different power supply rails, VCC and VL respectively. Both the VCC and VL supply rails are configurable from 1.5V to 5.5V. This allows voltage logic signals on the VL side to be translated into lower, higher or equal value voltage loigc signals on the VCC side, and vice-versa. The NLSX0102 translator has integrated 10k ohms pull-up resistors on the IO lines. The integrated resistors are used to pull-up the IO lines to either VL or VCC. The NLSX0102 is an excellent match for open-drain applications such as the I2C communication bus. Features • • • • • • • • • • VL can be Less than, Greater than or Equal to VCC Wide VCC Operating Range: 1.5 V to 5.5 V Wide VL Operating Range: 1.5 V to 5.5 V High Speed with 24 Mb/s Guaranteed Date Rate Low Bit to Bit Skew Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to 5.5 V Non preferential Power up Sequencing Integrated 10 k ohm Pull up Resistors Small Space Saving Package:1.9 mm x 0.9 mm x 0.5 mm Flipchip8 This is a Pb Free Device For more features, see the data sheet Applications End Products • I2C, SMBus • Mobile Phones, PDAs, Cameras Part Electrical Specifications Product NLSX0102FCT1G Compliance Status Channels Input Level VCC Min (V) VCC Max (V) tpd Max (ns) IO Max (mA) Package Type Pb-free Active 2 CMOS 1.5 5.5 7.4 1 Flip-Chip-8 Active 2 CMOS 1.5 5.5 7.4 1 Flip-Chip-8 Halide free NLSX0102FCT2G PPAP Capable Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016