Product Overview

Product Overview
NLSX4402: 2-BIT 20 MB/S DUAL-SUPPLY Level Translator
For complete documentation, see the data sheet
Product Description
The NLSX4402 is a 2-bit configurable dual-supply bidirectional
auto sensing translator that does not require a directional control pin.
The VCC I/O and VL I/O ports are designed to track two different
power supply rails, VCC and VL respectively. Both the VCC and VL
supply rails are configurable from 1.5 V to 5.5 V. This allows voltage
logic signals on the VL side to be translated into lower, higher or
equal value voltage logic signals on the VCC side, and vice-versa.
The NLSX4402 translator uses external pull-up resistors on the
I/O lines. The external pull-up resistors are used to pull up the I/O
lines to either VL or VCC. The NLSX4402 is an excellent match for
open-drain applications such as the I2C communication bus.
Features
•
•
•
•
•
•
•
•
•
•
VL can be Less than, Greater than or Equal to VCC
Wide VCC Operating Range: 1.5 V to 5.5 V
Wide VL Operating Range: 1.5 V to 5.5 V
High-Speed with 20 Mb/s Guaranteed Date Rate
Low Bit-to-Bit Skew
Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to 5.5 V
Non-preferential Powerup Sequencing
Power-Off Protection
Small Space Saving Package: 1.4 mm x 1.0 mm UQFN8 Package
These Devices are Pb-Free and are RoHS Compliant
For more features, see the data sheet
Applications
• I2C, SMBus
• Low Voltage ASIC Level Translation
• Mobile Phones, PDAs, Cameras
Part Electrical Specifications
Product
NLSX4402FMUTCG
Compliance
Status
Channels
Input Level
VCC Min (V)
VCC Max (V)
tpd Max (ns)
IO Max (mA)
Package Type
Pb-free
Active
2
CMOS
1.5
5.5
8.6
0.02
UDFN-8
Halide free
For more information please contact your local sales support at www.onsemi.com
Created on: 6/30/2016