Product Overview NLAS7222B: Analog Switch, USB 2.0, DPDT, 4.5 V, with Enable For complete documentation, see the data sheet Product Description ON Semiconductor's NLAS7222B and NLAS7222C are part of a series of analog switch circuits that are produced using the company's advanced sub-micron CMOS technology, achieving industry-leading performance. Both the NLAS7222B and NLAS7222C are 2- to 1-port analog switches. Their wide bandwidth and low bit-to-bit skew allow them to pass high-speed differential signals with good signal integrity. Each switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. Industry-leading advantages include a propagation delay of less than 250 ps, resulting from its low channel resistance and low I/O capacitance. Their high channel-to-channel crosstalk rejection results in minimal noise interference. Their bandwidth is wide enough to pass High-Speed USB 2.0 differential signals (480 Mb/s). Features • • • • • • • • • RON is Typically 8.0 Ω at VCC = 3.3V Low Bit-to-Bit Skew: Typically 50 ps Low Crosstalk: -30 dB @ 250 MHz Low Current Consumption: 1.0 µA Near-Zero Propagation Delay: 250 ps Channel On-Capacitance: 6.5 pF (Typical) VCC Operating Range: 1.65V to 4.5 V > 700 MHz Bandwidth (or Data Frequency) This is a Pb-Free Device Applications End Products • Differential Signal Data Routing • USB 2.0 Signal Routing • • • • Continuous Current Rating Through Each Switch ±50 mA Cell Phone, PDA, Digital Camera, and Notebook Cell Phone, PDA, Digital Camera, and Notebook 8 kV I/O to GND ESD Protection Part Electrical Specifications Product Compliance Status Channels Number of Switches Configuratio n Icc Max (µA) ron Max (Ω) VCC Min (V) VCC Max (V) Package Type NLAS7222BMUTAG Pb-free Active 2 UQFN-10 Active 2 UQFN-10 Halide free NLAS7222BMUTBG Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016