Product Overview NLAS7222A: USB 2.0 DPDT Analog Switch with Enable For complete documentation, see the data sheet Product Description The NLAS7222A is a 2- to 1-port Analog Switch. its wide bandwidth and low bit-to-bit skew allow it to pass high-speed differentail signals with good signal integity. The switch is bidirectional and offers little to no attenuation of the high-speed signals at the outputs. Industry leading advantages include a propagation delay of less than 250 ps, resulting from its low channel resistance and low I/O capacitance. Its high channel-to-channel crosstalk rejection results in minimal noise interference. Its bandwidth is wide enough to pass High-Speed USB 2.0 differential signals (480 Mb/s). Features • • • • • • • • • • RON is Typically 6.5 at VCC= 3V Low Bit-to-Bit Skew: Typically 50 ps OVT on D+ and D- up to 3.6V Power OFF Protection: When VCC= 0V, D+ and D- can tolerate up to 3.6V Low Crosstalk: -45dB at 250 MHz Low Current Consumption: 1 µA Near-Zero Propagation Delay: 250 ps VCC Operating Range: +3.0V to +3.6V > 720 MHz Bandwidth (or Data Frequency) This is a Pb-free Device For more features, see the data sheet Applications End Products • Differential Signal Data Routing • USB 2.0 Signal Routing • Cell Phone, PDA, Digital Camera, and Notebook Part Electrical Specifications Product Compliance Status Channels Number of Switches Configuratio n Icc Max (µA) ron Max (Ω) VCC Min (V) VCC Max (V) Package Type NLAS7222AMTR2G Pb-free Active 2 WQFN-10 Active 2 UQFN-10 Active 2 UQFN-10 Halide free NLAS7222AMUR2G Pb-free Halide free NLAS7222AMUTAG Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016