INFINEON BSF134N10NJ3G

n-Channel Power MOSFET
OptiMOS™
BSF134N10NJ3 G
Data Sheet
2.3, 2011-03-01
Final
Industrial & Multimarket
OptiMOS™ Power-MOSFET
BSF134N10NJ3 G
1
Description
OptiMOS™100V products are class leading power MOSFETs for highest power
density and energy efficient solutions. Ultra low gate- and output charges together
with lowest on state resistance in small footprint packages make OptiMOS™
100V the best choice forthe demanding requirements of voltage regulator
solutions in Solar, Drives, Datacom and Telecom applications. Super fast
switching Control FETs together with low EMI Sync FETs provide solutions that
are easy to design in. OptiMOS™ products are available in high performance
packages to tackle your most challenging applications giving full flexibility in
optimizing space- efficiency and cost.
Features
•
•
•
•
•
•
•
•
•
•
•
Optimized for high switching frequency DC/DC converter
Very low on-resistance RDS(on)
Excellent gate charge x RDS(on) product (FOM)
Qualified according to JEDEC1) for target applications
Superior thermal resistance
Pb-free plating; RoHS compliant
Halogen-free according to IEC61249-2-21
Double.sided cooling
Compatible with DirectFET® package MN footprint and outline2)
Low profile (<0.7mm)
Low parasitic inductance
Applications
•
•
•
•
Synchronous rectification
Primary side switches
Power managment for high performance computing
High power density point of load converters
Table 1
Key Performance Parameters
Parameter
Value
Unit
Related Links
VDS
100
V
IFX OptiMOS webpage
RDS(on),max
13.4
mΩ
IFX OptiMOS product brief
ID
40
A
IFX OptiMOS spice models
QOSS
32
nC
IFX Design tools
Qg.typ
23
Type
Package
Marking
BSF134N10NJ3 G
MG-WDSON-2
0210
1) J-STD20 and JESD22
2) DirectFET ® is a trademark of International Rectifier Corporation. BSF134N10NJ3 G uses DirectFET ® technology
licensed from International Rectifier Corporation.
Final Data Sheet
1
2.3, 2011-03-01
OptiMOS™ Power-MOSFET
BSF134N10NJ3 G
2
Maximum ratings
at Tj = 25 °C, unless otherwise specified.
Table 2
Maximum ratings
Parameter
Symbol
Continuous drain current
Values
ID
Min.
Typ.
Max.
-
-
40
Unit
Note / Test Condition
A
VGS=10 V, TC=25 °C
25
VGS=10 V, TC=100 °C
9
VGS=10 V, TA=25 °C,
RthJA=45 K/W1))
TC=25 °C
Pulsed drain current2)
ID,pulse
-
-
160
Avalanche energy, single pulse
EAS
-
-
70
mJ
Gate source voltage
VGS
-20
-
20
V
Power dissipation
Ptot
-
-
43
W
Tj,Tstg
-40
IEC climatic category; DIN IEC 68-1
-
TC=25 °C
TA=25 °C, RthJA=58 K/W1)
2.2
Operating and storage temperature
ID=30 A,RGS=25 Ω
150
°C
55/150/56
1) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70µm thick) copper area for drain connection.
PCB is vertical in still air
2) See figure 3 for more detailed information
3
Thermal characteristics
Table 3
Thermal characteristics
Parameter
Symbol
Thermal resistance, junction - case RthJC
Device on PCB
RthJA
Values
Unit
Note /
Test Condition
K/W
top
Min.
Typ.
Max.
-
-
2.9
-
-
1
bottom
-
-
58
6 cm2 cooling area1)
1) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70µm thick) copper area for drain connection.
PCB is vertical in still air
Final Data Sheet
2
2.3, 2011-03-01
OptiMOS™ Power-MOSFET
BSF134N10NJ3 G
Electrical characteristics
4
Electrical characteristics
Electrical characteristics, at Tj=25 °C, unless otherwise specified.
Table 4
Static characteristics
Parameter
Symbol
Drain-source breakdown voltage V(BR)DSS
Values
Min.
Typ.
Max.
100
-
-
Unit
Note / Test Condition
V
VGS=0 V, ID=1 mA
Gate threshold voltage
VGS(th)
2
2.7
3.5
Zero gate voltage drain current
IDSS
-
0.1
10
-
10
100
-
10
100
nA
VGS=20 V, VDS=0 V
-
12.2
13.4
mΩ
VGS=10 V, ID=30A
15.4
20
-
Gate-source leakage current
IGSS
Drain-source on-state resistance RDS(on)
Gate resistance
RG
-
0.5
Transconductance
gfs
22
44
Table 5
VDS=VGS, ID=40 µA
VDS=100 V, VGS=0 V,
Tj=25 °C
µA
VDS=100 V, VGS=0 V,
Tj=125 °C
VGS=6 V, ID=15A
Ω
S
|VDS|>2|ID|RDS(on)max,
ID=30 A
Dynamic characteristics
Parameter
Symbol
Values
Min.
Typ.
Max.
Input capacitance
Ciss
-
1700
2300
Output capacitance
Coss
-
320
430
Reverse transfer capacitance
Crss
-
12
-
Turn-on delay time
td(on)
-
10
-
Rise time
tr
-
6
-
Turn-off delay time
td(off)
-
15
-
Fall time
tf
-
5
-
Final Data Sheet
3
Unit
Note /
Test Condition
pF
VGS=0 V, VDS=50V,
f=1 MHz
ns
VDD=50V, VGS=10 V,
ID=30 A, RG= 1.6 Ω
2.3, 2011-03-01
OptiMOS™ Power-MOSFET
BSF134N10NJ3 G
Electrical characteristics
Table 6
Gate charge characteristics1)
Parameter
Symbol
Values
Min.
Typ.
Max.
Gate to source charge
Qgs
-
8
-
Gate to drain charge
Qgd
-
4.1
-
Switching charge
Qsw
-
9
-
Gate charge total
Qg
-
23
30
Gate plateau voltage
Vplateau
-
4.7
-
Output charge
Qoss
32
42
Unit
Note /
Test Condition
nC
VDD=50 V,
ID=30 A,
VGS=0 to 10 V
V
VDD=50 V, VGS=0 V
1) See figure 16 for gate charge parameter definition
Table 7
Reverse diode characteristics
Parameter
Symbol
Values
Min.
Typ.
Unit
Note /
Test Condition
A
TC=25 °C
Max.
Diode continuous forward current
Is
36
Diode pulse current
IS,pulse
160
Diode forward voltage
VSD
-
0.9
1.2
V
VGS=0 V, IF=IS,
Tj=25 °C
Reverse recovery charge
trr
-
59
-
nC
Reverse recovery time
Qrr
-
112
-
ns
VR=50V, IF=Is,
diF/dt=100 A/µs
Final Data Sheet
4
2.3, 2011-03-01
OptiMOS™ Power-MOSFET
BSF134N10NJ3 G
Electrical characteristics diagrams
5
Electrical characteristics diagrams
Table 8
1 Power dissipation
2 Drain current
Ptot = f(TC)
ID=f(TC); parameter:VGS
Table 9
3 Safe operating area TC=25 °C
ID=f(VDS); Tj=25 °C; D=0; parameter: Tp
Final Data Sheet
4 Max. transient thermal impedance
Z(thJC)=f(tp); parameter: D=tp/T
5
2.3, 2011-03-01
OptiMOS™ Power-MOSFET
BSF134N10NJ3 G
Electrical characteristics diagrams
Table 10
5 Typ. output characteristics TC=25 °C
6 Typ. drain-source on-state resistance
ID=f(VDS); Tj=25 °C; parameter: VGS
RDS(on)=f(ID); Tj=25 °C; parameter: VGS
Table 11
7 Typ. transfer characteristics
8 Typ. forward transconductance
ID=f(VGS); |VDS|>2|ID|RDS(on)max
gfs=f(ID); Tj=25 °C
Final Data Sheet
6
2.3, 2011-03-01
OptiMOS™ Power-MOSFET
BSF134N10NJ3 G
Electrical characteristics diagrams
Table 12
9 Drain-source on-state resistance
10 Typ. gate threshold voltage
RDS(on)=f(Tj); ID=30 A; VGS=10 V
VGS(th)=f(Tj); VGS=VDS
Table 13
11 Typ. capacitances
12 Forward characteristics of reverse diode
C=f(VDS); VGS=0 V; f=1 MHz
IF=f(VSD); parameter: Tj
Final Data Sheet
7
2.3, 2011-03-01
OptiMOS™ Power-MOSFET
BSF134N10NJ3 G
Electrical characteristics diagrams
Table 14
13 Avalanche characteristics
14 Typ. gate charge
IAS=f(tAV); RGS=25 Ω; parameter: Tj(start)
VGS=f(Qgate); ID=30 A pulsed; parameter: VDD
Table 15
15 Drain-source breakdown voltage
16 Gate charge waveforms
VBR(DSS)=f(Tj); ID=1 mA
Final Data Sheet
8
2.3, 2011-03-01
OptiMOS™ Power-MOSFET
BSF134N10NJ3 G
Package outlines
6
Package outlines
Figure 1
Outlines MG-WDSON-2, dimensions in mm/inches
Final Data Sheet
9
2.3, 2011-03-01
OptiMOS™ Power-MOSFET
BSF134N10NJ3 G
Package outlines
7
Package outlines
Figure 2
Outlines MG-WDSON-2, dimensions in mm/inches
Final Data Sheet
10
2.3, 2011-03-01
OptiMOS™ Power-MOSFET
BSF134N10NJ3 G
Package outlines
8
Package outlines
Final Data Sheet
11
2.3, 2011-03-01
OptiMOS™ Power-MOSFET
BSF134N10NJ3 G
Revision History
9
Revision History
Revision History: 2011-03-01, 2.3
Previous Revision:
Revision
Subjects (major changes since last revision)
0.1
Release of target data sheet
1.0
Release Preliminary data sheet
2.2
Release Final data sheet
2.3
Minor formating
We Listen to Your Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to: [email protected]
Edition 2011-03-01
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2011 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights
of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in
question, please contact the nearest Infineon Technologies Office.
The Infineon Technologies component described in this Data Sheet may be used in life-support devices or
systems and/or automotive, aviation and aerospace applications or systems only with the express written approval
of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that
life-support, automotive, aviation and aerospace device or system or to affect the safety or effectiveness of that
device or system. Life support devices or systems are intended to be implanted in the human body or to support
and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the
user or other persons may be endangered.
Final Data Sheet
12
2.3, 2011-03-01