Product Overview MC100EL17: ECL Quad Differential Receiver For complete documentation, see the data sheet Product Description The MC100EL17 is a low-voltage, quad differential receiver. The device is functionally equivalent to the E116 device. Under open input conditions, the Dbar input will be biased at VCC/2 and the D input will be pulled down to VEE . This operation will force the Q output LOW and ensure stability. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. Features • • • • • • • • • • 325 ps Propagation Delay ESD Protection: > 2 KV HBM, > 100 V MM The 100 series contains temperature compensation PECL Mode Operating Range: VCC = 4.2 V to 5.7 V with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = -4.2 V to -5.7 V Internal Input Pulldown Resistors Q Output will Default LOW with Inputs Open or at VEE Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 Transistor Count = 141 devices For more features, see the data sheet Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type MC100EL17DWG Pb-free Active Signal Driver 4 1:1 ECL 0.7 75 0.45 550 1000 Halide free LVD S 5 ECL For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016 SOIC20W