Product Overview MC100EP16: Differential Driver / Receiver For complete documentation, see the data sheet Product Description The EP16 is a world-class differential receiver/driver. The device is functionally equivalent to the EL16 and LVEL16 devices with higher performance capabilities. With output transition times significantly faster than the EL16 and LVEL16, the EP16 is ideally suited for interfacing with high frequency sources. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 µF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. Under open input conditions (pulled to VEE ) internal input clamps will force the Q output LOW. The 100 Series contains temperature compensation. Features • • • • • • • • 220 ps Propagation Delay Maximum Frequency > 4 GHz Typical (See Graph) PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = -3.0 V to -5.5 V Open Input Default State Safety Clamp on Inputs Q Output Will Default LOW with Inputs Open or at VEE VBB Output Applications • ATE Automatic Test Equipment Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type MC100EP16DG Pb-free Active Signal Driver 1 1:1 ECL 0.2 20 0.22 170 4000 SOIC8 Signal Driver 1 0.2 20 0.22 170 4000 SOIC8 Signal Driver 1 0.2 20 0.22 170 4000 TSSO P-8 Signal Driver 1 0.2 20 0.22 170 4000 TSSO P-8 Signal Driver 1 0.2 20 0.22 170 4000 DFN-8 Halide free MC100EP16DR2G Pb-free Active Halide free MC100EP16DTG Pb-free Active Halide free MC100EP16DTR2G Pb-free Active Halide free MC100EP16MNR4G Pb-free Halide free Active CML ECL 1:1 CML 5 ECL ECL 1:1 CML CML ECL ECL CML 3.3 5 ECL ECL 1:1 5 3.3 ECL 1:1 3.3 3.3 5 ECL 3.3 5 For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016