Product Overview MC100LVEL17: Quad Differential Receiver For complete documentation, see the data sheet Product Description The MC100LVEL17 is a 3.3 V ECL, quad differential receiver. The device is functionally equivalent to the E116 device with the capability of operation from either a -3.3 V or +3.3 V supply voltage. Under open input conditions, the Dbar input will be biased at VCC /2 and the D input will be pulled down to VEE . This operation will force the Q output LOW and ensure stability. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. Features • • • • • • • • • • 325 ps Propagation Delay High Bandwidth Output Transitions ESD Protection: >2 KV HBM The 100 Series Contains Temperature Compensation PECL Mode Operating Range: VCC = 3.0 V to 3.8 V with VEE = 0 V NECL Mode Operating Range: VCC = 0 V with VEE = -3.0 V to -3.8 V Internal Input Pulldown Resistors Q Output will Default LOW with Inputs Open or at VEE Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 For more features, see the data sheet Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type MC100LVEL17DWG Pb-free Active Signal Driver 4 1:1 ECL 3.3 0.7 75 0.45 550 1750 SOIC20W Signal Driver 4 ECL 3.3 0.7 75 0.45 550 1750 SOIC20W Halide free MC100LVEL17DWR2 G Pb-free Halide free Active ECL LVD S 1:1 ECL LVD S For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016