Product Overview

Product Overview
MC10EP116: Hex Differential Line Receiver / Driver
For complete documentation, see the data sheet
Product Description
The MC10EP116/100EP116 is a 6-bit differential line receiver based on the EP16 device. The 3.0GHz bandwidth provided by the
high frequency outputs makes the device ideal for buffering of very high speed oscillators.
The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused
differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple
VBB and VCC via a 0.01uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open.
The design incorporates two stages of gain, internal to the device, making it an excellent choice for use in high bandwidth amplifier
applications.
The differential inputs have internal clamp structures which will force the Q output of a gate in an open input condition to go to a
LOW state. Thus, inputs of unused gates can be left open and will not affect the operation of the rest of the device. Note that the
input clamp will take affect only if both inputs fall 2.5V below VCC.
The 100 Series contains temperature compensation.
Features
•
•
•
•
•
•
•
•
•
260 ps Typical Propagation Delay
Maximum Frequency > 3 GHz Typical
PECL Mode Operating Range: VCC = 3.0 V to 5.5 V with VEE = 0 V
NECL Mode Operating Range: VCC = 0 V with VEE =-3.0 V to -5.5 V
Open Input Default State
Safety Clamp on Inputs
Q Output will default LOW with inputs open or at VEE
VBB Output
Pb-Free Packages are Available
Applications
• General Purpose Logic
Part Electrical Specifications
Product
Compliance
Status
Type
Chann
els
Input / Input
Output Level
Ratio
Output VCC
Level
Typ
(V)
tJitterR
MS
Typ
(ps)
tskew(oo) Max
(ps)
tpd Typ
(ns)
tR & tF
Max
(ps)
fmaxClo fmaxDat Packa
ck Typ a Typ ge
(MHz) (Mbps) Type
MC10EP116FAG
Pb-free
Active
Signal
Driver
6
1:1
ECL
0.2
20
0.26
220
3000
LQFP32
Active
Signal
Driver
6
1:1
0.2
20
0.26
220
3000
LQFP32
Halide free
MC10EP116FAR2G
Pb-free
Halide free
CML
ECL
ECL
CML
3.3
5
ECL
5
3.3
For more information please contact your local sales support at www.onsemi.com
Created on: 6/30/2016