5 LOAD/CHG BAT- BAT+ TS 4 CONN_1 GAS GAUGE 1 2 3 4 5 6 2 1 CONN_2 GAS GAUGE 1 GPIO1_GG 2 GPIO2_GG 3 GPIO3_GG 4 GPIO4_GG BCM_I2C_SDA 5 BCM_I2C_SCL 6 1x6 HMTSW-106-07-G-S-230-005 D 3 1x6 HMTSW-106-07-G-S-230 D SUB-MODULE CONNECTORS C R5 1.8M 1/16W LOAD/CHG IS INTENTIONALLY SHORTED TO BAT+ LOAD/CHG C BAT+ U1 1 2 3 4 TS C4 .47uF 10V C2 0.1uF 10V C3 0.1uF 10V BIN REG25 REGIN BAT BCM_I2C_SDA 10 BCM_I2C_SCL 11 VSS PWPD 12 GPIO1_GG 6 13 BQ27410DRZ-G1 C1 0.1uF SRP SRN 5 R6 10K 1/10W SDA GPOUT SCL 7 8 BAT- VCC 10V R4 0.01 1/4W C1 should be as close as possible to the IC. IC connection to sense resistor must be of Kelvin connection type. B B BQ27410-G1 Gas Gauge Sub-Module A A Approval LB1 REV A 5 4 3 Designer Antonio Fadhel Drawn By Antonio Fadhel Layout Dawn Ritz Title Date SMP-BQ27410G1-MVK Rev A Size B EDGE No 6527570 Date Monday, September 26, 2011 2 Sheet 1 of 1 1