5 PMU_3_3V VOUT 4 CONN_1 VIN 1 2 3 4 5 6 D 3 2 1 CONN_2 PG EN PS GPIO I2C_SDA_MODx I2C_SCL_MODx 1x6 HMTSW-106-07-G-S-230-003 1 2 3 4 5 6 D 1x6 HMTSW-106-07-G-S-230 SUB-MODULE CONNECTORS PMU_3_3V 0.3 V - 5.5 V L1 VIN 2.2uH U1 5 R1 C R2 0 1/10W 10K 1/16W EN PS 6 8 7 9 11 VIN 3 L EN PS UVLO 5.5 V 2 VOUT 1 VAUX 10 4 GND FB HS_PAD PGND C1 R3 2.00M 1/10W 0.1uF 10V TPS61200DRC C2 10uF 10V R5 1M 1/10W DNI R6 200K 1/10W TPS61201* TPS61202* R4 10K 1/16W DNI R7 200K 1/10W VOUT C C3 22uF 25V *Replace R3 with a 0-ohm resistor and DNI R6 if using the TPS61201 or TPS61202. B B U2 I2C_SDA_MODx B1 I2C_SCL_MODx B2 SDA SCL PMU_3_3V A1 A2 V+ GND C4 0.01uF 16V ADDR = 1110000 TMP103AYFF TPS6120x Boost Converter Sub-Module A A 1 SMP-TPS6120X-MVK BOM REV A 5 4 Title Approval LB1 3 Designer Antonio Fadhel Drawn By Antonio Fadhel Layout Dawn Ritz Size Date 2 SMP-TPS6120X-MVK B EDGE No 6527666 Wednesday, November 16, 2011 1 Rev A Page 1 of 1