Product Overview NCV33202: 12V Low Noise, Rail-Rail I/O, High Output Drive, Dual Op-Amp For complete documentation, see the data sheet Product Description The MC33201/2/4 family of op-amps provides rail-to-rail operation on both the input and output. The inputs can be driven as high as 200mV beyond the supply rails without phase reversal on the outputs, and the output can swing within 50 mV of each rail. This railto-rail operation enables the user to make full use of the supply voltage range available. It is designed to work at very low supply voltages ( +/- 0.9 V) yet can operate with a supply of up to +12V and ground. Output current boosting techniques provide a high output current capability while keeping the drain current of the amplifier to a minimum. Also, the combination of low noise and distortion with a high slew rate and drive capability make this an ideal amplifier for audio applications. Features • • • • • • • • • Low Voltage, Single Supply Operation (+1.8 V and Ground to +12 V and Ground) Input Voltage Range Includes both Supply Rails Output Voltage Swings within 50 mV of both Rails No Phase Reversal on the Output for Over-driven Input Signals High Output Current (ISC = 80 mA, Typ) Low Supply Current (ID = 0.9 mA, Typ) 600 <font face=Symbol>W</font> Output Drive Capability Extended Operating Temperature Ranges (-40° to +105°C and -55° to +125°C) Typical Gain Bandwidth Product = 2.2 MHz Part Electrical Specifications Product Compliance Status Rail to Rail NCV33202DMR2G AEC Qualified Active Active Channel s VCC Min (V) VCC Max IO Min (V) (mA) IO Typ (mA) ID Typ (mA) GBW Typ (MHz) SR Typ (V/µs) VIO Max (mV) Packag e Type Input/Ou 2 tput 1.8 12 50 80 0.9 2 1 8 Micro8 ™ Input/Ou 2 tput 1.8 12 50 80 0.9 2 1 8 SOIC-8 PPAP Capable Pb-free Halide free NCV33202VDR2G AEC Qualified PPAP Capable Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016