FME Fuseholders www.schurter.com/PG999 OU T Fuseholder Open Design, Holder for MSF 125, Panel Mount 125 VAC/DC · 5 A (UL/CSA) Description References -Panel mount, front side This type is Phase-out without alternate type Last order date: 31.12.2012 Fuseholder to MSF 125; MSU 125 Standards -UL 4248-1 / UL 512 -CSA 4248-1 / no. 39 Weblinks pdf-datasheet, html-datasheet, General Product Information, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS, REACH, e-Shop, SCHURTER-Stock-Check, Distributor-Stock-Check, Detailed request for product Approvals -UL File Number: E39328 -CSA File Number: 38456 Soldering Methods Solderability Iron 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2 < 5 mΩ at 20 mV > 3 kV (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree 11.5 mm 1.5 +0.1 0 4.9 ø 8.3 PH 0 ø 6.35 ø 4.7 -0.1 1.9x1.4 8.1 +0.1 0 4.8 +0.2 0 11.5 4 Dimension Microfuse 125 V Panel Mount Solder 125 VAC/DC 5 A (UL/CSA) IP 40 -40 °C to 85 °C 40/085/21 acc. to IEC 60068-1 Thermoset, black, UL 94V-0 Silver-Plated Brass 0.3 g 0 °C to 60 °C, max. 70% r.h. ,␣ AS Fuse-Link Mounting Terminal Rated Voltage Rated current Degree of Protection Admissible Ambient Air Temp. Climatic Category Material: Socket Material: Terminals Unit Weight Storage Conditions Product Marking E- Technical Data max. 3.2 Drilling diagram All Variants Holder l Order Number 0031.7503 Availability for all products can be searched real-time:http://www. schurter.com/en/Stock-Check/StockCheck-SCHURTER Fuses 1 FME Fuseholders www.schurter.com/PG999 Plastic Bag (100 pcs.) 2 Fuses 30.03.2015 PH AS E- OU T Packaging Unit The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications.