FMR Fuseholder Blocks & Clips www.schurter.com/pg02b Fuseholder Open Design, Holder for MSF 125, horizontal, THT 125 VAC · 5 A (UL/CSA) Description References -Through hole mounting -Horizontal mount General Product Information Fuseholder to MSF 125 Standards Weblinks Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) -UL 512 -CSA C22.2 no. 39 Approvals -UL File Number: E39328 Technical Data Fuse-Link Mounting Terminal Rated Voltage Rated Current Degree of Protection Admissible Ambient Air Temp. Climatic Category Material: Socket Material: Terminals Unit Weight (Socket/Cap) Storage Conditions Product Marking Microfuse 125 V PCB Solder THT 125 VAC 5 A (UL/CSA) IP 40 -40 °C to 85 °C 40/085/21 acc. to IEC 60068-1 Thermoplastic, black, UL 94V-0 Silver-Plated Brass 0.34 g 0 °C to 60 °C, max. 70% r.h. , Approvals Abmessungen Soldering Methods Solderability Wave 235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 1 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 1A < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree 11.3 mm 6.6 +0.1 0 6.1 5.08 2.54 0.5 5.08 1.05±0.05 4.7 6.6 1.3 2.54 Drilling diagram Variants Holder l Order Number 0031.7505 Packaging Unit Plastic Bag (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.