Product Overview NCP58300: Voltage Regulator Series, VLDO, Fast Transient Response, 3.0 A For complete documentation, see the data sheet Product Description The NCP58300 series are high precision, very low dropout (VLDO), low ground current positive voltage regulators that are capable of providing an output current in excess of 3.0 A with a typical dropout voltage lower than 370 mV at 3.0 A load current.The devices are stable with tantalum output capacitors. This series consists initially of an Adjustable output voltage version, with fixed voltage versions planned in the future. The NCP58300 series can withstand up to 18 V max input voltage. Internal protection features consist of output current limiting, built-in thermal shutdown and reverse output current protection. Logic level enable and error flag pins are available on the 5-pin version. The NCP58302 is an Adjustable voltage Device and is offered in D2PAK-5 package. Features Benefits • 370 mV typical dropout at full 3.0 A load • • • • • • • Generate secondary power rails without having to use a switching regulator • Minimizes the power loss across the regulator • Specified to be stable with tantalum capacitor • AEC-Q100 qualifed and PPAP capable • Suitable for Automotive and Netcom applications Low ground current - 50 mA typical at 3.0 A load Stable with tantalum capacitor on the output NCV version available for Automotive applications Maximum voltage input up to 18 V Output Current in excess of 3 Amps Automotive modules Applications End Products • Point of load for FPGA, DSP and processors • Switching power supply post regulation • Servers and Networking Equipment Part Electrical Specifications Product Compliance Status Output Polarity VO (V) IO Typ (A) NCP58302DSADJR4G Pb-free Active Single Positive Adjustabl 3 e VI Max (V) VDO Typ (V) Iq Typ (mA) 18 0.37 50 PSRR (dB) Noise (µVrms) Package Type 400 D PAK-5 2 Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016