Product Overview NCP59302: Voltage Regulator, VLDO, Fast Transient Response, 3.0 A For complete documentation, see the data sheet Product Description The NCP59302 is a high precision, very low dropout (VLDO), low ground current positive voltage regulator that is capable of providing an output current in excess of 3.0 A with a typical dropout voltage lower than 300 mV at 3.0 A load current. The device is stable with ceramic output capacitors. The device can withstand up to 18 V max input voltage. Internal protection features consist of output current limiting, build-in thermal shutdown and reverse output current protection. Logic level enable pin is available. The NCP59302 is an adjustable voltage device and is available in D2PAK-5 package. Features Benefits • 300 mV typical dropout at the full 3.0 A load. • • • • • • • Generate secondary power rails without having to use a switching regulator • minimizes the power loss across the regulator • avoids expensive polarized tantalum capacitors • AECQ100 qualified and PPAP capable. • Suitable for Automotive and Netcom applications Low Ground current - 60 mA typical at 3 Amp load Stable with ceramic capacitors on the output NCV version available for Automotive applications Maximum voltage input 18V Output Current in excess of 3 Amps Automotive modules Applications End Products • Pooint of load for FPGA, DSP and processors • Switching power supply post regulation • Servers and Networking Equipment Part Electrical Specifications Product Compliance Status Output Polarity VO (V) NCP59302DSADJR4G Pb-free Active Single Positive Active Single Positive IO Typ (A) VI Max (V) VDO Typ (V) Iq Typ (mA) PSRR (dB) Noise (µVrms) Package Type Adjustabl 3 e 18 0.3 60 70 D PAK-5 Adjustabl 3 e 18 0.3 60 70 D PAK-5 2 Halide free 2 NCV59302DSADJR4G AEC Qualified PPAP Capable Pb-free Halide free For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016