View PDF

FINAL PRODUCT/PROCESS CHANGE NOTIFICATION # 16821
Generic Copy
27-Mar-2012
TITLE: Final Notification of the Transfer of LS50 HDPL Die Manufacturing from ON Semiconductor
AIZU Fab to ON Semiconductor CZ4 (Tesla) Fab due to Aizu Fab closure.
PROPOSED FIRST SHIP DATE: 01-July-2012
AFFECTED CHANGE CATEGORY(S): ON Semiconductor wafer fab site
FOR ANY QUESTIONS CONCERNING THIS NOTIFICATION:
Contact your local ON Semiconductor Sales Office or <[email protected]>
SAMPLES: Contact your local ON Semiconductor Sales Office. Availability of samples for CZ4
devices is noted below. Note: for parts released in 2 reel types (i.e. NCV8402ASTT1G and
NCV8402ASTT3G), samples will be shown available for STT3G reel type only.
ADDITIONAL RELIABILITY DATA: Available
Contact your local ON Semiconductor Sales Office or Peter Turlo<[email protected]>
ELECTRICAL CHARACTERIZATION DATA:
Contact Product Engineering Marc Fillion<[email protected]>
NOTIFICATION TYPE:
Final Product/Process Change Notification (FPCN)
This is the final change notification being sent to customers. FPCN's are issued at least 90 days
prior to implementation of the change.
ON Semiconductor will consider this change approved unless specific conditions of acceptance are
provided in writing within 30 days of receipt of this notice. To do so, contact <[email protected]>.
DESCRIPTION AND PURPOSE:
This document depicts the transfer and qualification of the LS50 HDPL process from the ON
Semiconductor AIZU facility (Japan) to the ON Semiconductor CZ4 facility (Tesla). The CZ4 Tesla
site is certified according to ISO/TS16949 standards.
Devices were qualified to achieve same electrical and reliability performances as the AIZU wafer fab.
A full electrical characterization over the temperature range was performed for each product to
check the device functionality and electrical specifications. Qualification tests were designed to show
that the reliability of transferred devices will continue to meet or exceed ON Semiconductor
standards.
Part status – Part status for all parts being replaced will be Active, Not Recommended for New
Design initially. Once bridge inventory on each part has been depleted to the point where backlog
equals remaining inventory, parts status will change to No Orders Allowed. Once all backlog has
shipped, parts status will change to Cancel Pending.
Issue Date: 27-Mar-2012
Rev. 06-Jan-2010
Page 1 of 3
FINAL PRODUCT/PROCESS CHANGE NOTIFICATION # 16821
RELIABILITY DATA SUMMARY (LS50):
Qualification Vehicles NCV8401 (2 lots) / NCV8403 (1 lot) / NCV8450
Accelerated LifeTime Simulation Tests:
#
5
10-alt
27
Test
HTRB
HTOL
DI
Specification
JESD22 A108
JESD22 A108
AEC Q101
Conditions
Ta= 150°C, Vdss=45V, 1008 hrs
Ta=125°C for 2000 hrs
Lots
3
2
1
Samples
80
80
5
Results
0 / 240
0 / 160
0/5
Package Assembly integrity Test s
#
2
3
6a
7
8
9-alt
10-alt
12
13
20
21
22
23
24
25
Test
PC
EV
HTSL
TC
AC
HAST
PTC
DPA
PD
RSH
SD
TR
WBS
BS
DS
Specification
JESD22 A113
JESD22 B101
JESD22 A103
JESD22 A104
JESD22 A102
JESD22 A110
JESD22 A105
AEC Q101-004-4
JESD22 B100
JESD22 B106
JESD22 002
JESD22 B106
Mil-Std-750
AEC-Q101-003
Mil-Std-750
Conditions
for AC, TC, HAST, PTC
Ta=150°C for 2000 hrs.
-65°C to+150°C; for 1000 cycles.
121°C/100% RH, 15 psi for 96 hrs
130°C/85% RH, 18.8psi,bias,96 hrs
ΔTj=100C°. With PC
post HAST, or AC, and TC
PbSn,>95% coverage
Lots
all
all
2
3
3
3
1
3
3
1
1
1
1
1
1
Samples
all
all
80
84
84
84
30
2
10
30
10
10
5
5
5
Results
0 / all
0 / all
0 / 160
0 / 252
0 / 252
0 / 252
0 / 30
Pass
0 / 30
0 / 30
0 / 10
0 / 10
0/5
0/5
0/5
Electrical Verification (all products)
Multi temperature characterization data is available for individual devices upon request
Issue Date: 27-Mar-2012
Rev. 06-Jan-2010
Page 2 of 3
FINAL PRODUCT/PROCESS CHANGE NOTIFICATION # 16821
CHANGED PART IDENTIFICATION:
In the case of direct transfer of a device from AIZU to CZ4, the letter “A” will be added to the OPN to
identify parts from the new wafer fab. (Ex: NCV8401DTRKG will be replaced by NCV8401ADTRKG).
Please note that a number of devices are not being transferred but are being replaced by new CZ4
devices rather than a direct transfer of original device. These will show a different part number from
the AIZU part number. (Ex: NID5001NT4G will be replaced by NCV8401ADTRKG). For these
devices the CZ4 part is a pin for pin compatible device to the original device.
List of affected General Parts:
List of affected General Parts:
Replacement Parts:
Samples Available:
NCV8401DTRKG
NCV8402DDR2G
NCV8402STT1G
NCV8402STT3G
NCV8403DTRKG
NCV8403STT1G
NCV8403STT3G
NCV8405STT1G
NCV8405STT3G
NCV8406DTRKG
NCV8406STT3G
NCV8401ADTRKG
NCV8402ADDR2G
NCV8402ASTT1G
NCV8402ASTT3G
NCV8403ADTRKG
NCV8403ASTT1G
NCV8403ASTT3G
NCV8405ASTT1G
NCV8405ASTT3G
NCV8406ADTRKG
NCV8406ASTT3G
NCV8440ASTT1G
NCV8440ASTT3G
NIC5004ATS1
NIC9N05ATS1
NCV8401ADTRKG
NCV8403ADTRKG
NCV8406ADTRKG
NID9N05ACLT4G
NCV8402ASTT1G
NCV8402ASTT3G
NCV8403ASTT1G
NCV8403ASTT3G
NCV8405ASTT1G
NCV8405ASTT3G
NCV8440ASTT1G
NCV8440ASTT3G
NIMD6001ANR2G
Available now
Available now
See NCV8402ASTT3G
Available now
Available now
See NCV8403ASTT3G
June – 2012
See NCV8405ASTT3G
Available now
Available now
Available now
See NCV8440ASTT3G
Available now
NCV8440STT1G
NCV8440STT3G
NIC5004TS1
NIC9N05TS1
NID5001NT4G
NID5003NT4G
NID6002NT4G
NID9N05CLT4G
NIF5002NT1G
NIF5002NT3G
NIF5003NT1G
NIF5003NT3G
NIF62514T1G
NIF62514T3G
NIF9N05CLT1G
NIF9N05CLT3G
NIMD6001NR2G
Issue Date: 27-Mar-2012
Rev. 06-Jan-2010
July - 2012
Available now
Available now
Available now
Available now
Available now
See NCV8402ASTT3G
Available now
See NCV8403ASTT3G
June – 2012
See NCV8405ASTT3G
Available now
See NCV8440ASTT3G
Available now
June – 2012
Page 3 of 3