Type 103P Vishay Sprague Paper Capacitors Metal Case, Film/Foil, 10 Ampere Thru-Pass, Subminiature FEATURES • Bulkhead mounting • Excellent RFI specifications • Hermetically encased • Low inductance connection • Low insertion loss PERFORMANCE CHARACTERISTICS DC Life Test: 140% of rated voltage for 250 hours @ + 125°C. No open or short circuits. No visible damage. Maximum ∆ Cap.: ± 5%. Minimum I.R. = 30% of initial limit. Maximum D.F. = 1.5%. Operating Temperature: - 55°C to + 125°C. Capacitance Range: 0.001µF to 1.0µF. Capacitance Tolerance: ± 20%, ± 10%. Moisture Resistance: MIL-STD-202, Method 106E, 10 cycles. No visible damage. Maximum ∆ Cap.: ± 5%. Minimum I.R. = 30% of initial limit. Maximum D.F. = 1.5%. Voltage Rating: 200 WVDC to 600 WVDC. Current Rating: 10 ampere maximum. Thermal Shock and Immersion Cycling: No visible damage. Maximum ∆ Cap.: ± 5%. Minimum I.R. = 30% of initial limit. Maximum D.F. = 1.5%. Dissipation Factor: 1.0% maximum. DC Resistance: 0.01 ohm maximum. Voltage Test: 200% of rated voltage for 1 minute. PHYSICAL CHARACTERISTICS Insulation Resistance: At + 25°C: 20,000 Megohm Microfarads or 30,000 Megohm minimum. At + 85°C: 200 Megohm - Microfarads or 300 Megohm minimum. Lead Pull: 5 pounds (2.3 kilograms) for one minute. No physical damage. Lead Bend: After three complete consecutive bends, no damage. Marking: Sprague® trademark, type or part number, capacitance and voltage. ENVIRONMENTAL CHARACTERISTICS Vibration Test (Condition A): No mechanical damage, short, open or intermittent circuits. DIMENSIONS in inches [millimeters] Circuit Diagram 0.312 ± 0.031 [7.92 ± 0.79] 1.625 + 1.000 - 0.0 [41.28 + 25.40 - 0.0] 1.625 + 1.000 - 0.0 [41.28 + 25.40 - 0.0] L ± 0.031 [0.79] D + 0.015 [0.38] - 0.005 [0.130] Dia. 0.040 + 0.004 - 0.001 [1.02 + 0.10 - 0.02] Dia. No. 18 AWG Solid Tinned Leads www.vishay.com 96 0.255 [6.48] 0.250 [6.35] Across Flats 0.125 [3.18] Max. External Toothed Lockwasher Pt. No. 2-123 0.125 ± 0.015 [3.18 ± 0.38] Nut 5/16 [7.938] 24 UNF-2A Pt. No. 6-113 Straddle Milled Flats on Thread for Locking on Mounting Surface For technical questions, contact [email protected] 0.437 ± 0.015 [11.10 ± 0.38] Across Flats Document Number: 42032 Revision 17-Nov-03 Type 103P Vishay Sprague DIMENSIONS in inches [millimeters] Tab Terminals 0.255 [6.48] 0.250 [6.35] CL Across Flats 0.020 ± 0.005 [0.51 ± 0.13] CL 0.020 ± 0.005 [0.51 ± 0.13] CL CL 0.125 ± 0.015 [3.18 ± 0.38] 0.125 ± 0.015 [3.18 ± 0.38] Slot 0.062 x 0.125 [1.58 x 3.18] 0.187 ± 0.015 [4.75 ± 0.38] 0.296 ± 0.062 [7.52 ± 1.57] 0.187 ± 0.015 [4.75 ± 0.38] 0.296 ± 0.015 [7.52 ± 0.38] Slot 0.060 [1.52] 0.050 [1.27] x 0.125 [3.18] .312 ± 0.031 [7.92 ± 0.79] 0.156 ± 0.015 [3.96 ± 0.38] 0.156 ± 0.015 [3.96 ± 0.38] 5/16 [7.938] 24 UNF 2A THD STANDARD RATINGS in inches [millimeters] CAPACITANCE (µF) PART NUMBER* TAB TERMINAL NOMINAL CASE SIZE DxL WIRE LEAD 200 WVDC 0.047 0.10 0.22 0.47 1.00 103P473X0200T 103P104X0200T** 103P224X0200T 103P474X0200T** 103P105X0200T 103P473X0200S 103P104X0200S 103P224X0200S 103P474X0200S 103P105X0200S 0.400 x 0.875 [10.16 x 22.23] 0.400 x 1.125 [10.16 x 28.58] 0.562 x 1.125 [14.27 x 28.58] 0.562 x 1.875 [14.27 x 47.63] 0.750 x 2.125 [19.05 x 53.98] 300 WVDC 0.047 0.10 0.22 0.47 103P473X0300T 103P104X0300T 103P224X0300T 103P474X0300T 0.047 0.10 0.22 0.47 103P473X0400T 103P104X0400T** 103P224X0400T** 103P474X0400T 0.400 x 1.125 [10.16 x 28.58] 0.400 x 1.375 [10.16 x 34.93] 0.562 x 1.375 [14.27 x 34.93] 0.670 x 1.875 [17.02 x 47.63] 103P473X0300S 103P104X0300S 103P224X0300S 103P474X0300S 400 WVDC 103P473X0400S 103P104X0400S* 103P224X0400S* 103P474X0400S 0.400 x 1.375 [10.16 x 34.93] 0.562 x 1.125 [14.27 x 28.58] 0.562 x 1.875 [14.27 x 47.63] 0.750 x 2.125 [19.05 x 53.98] 600 WVDC 0.001 0.400 x 0.750 [10.16 x 19.05] 103P102X0600T 103P102X0600S 0.0047 103P472X0600T** 103P472X0600S* 0.400 x 0.750 [10.16 x 19.05] 0.01 103P103X0600T** 103P103X0600S* 0.400 x 0.750 [10.16 x 19.05] 0.047 103P473X0600T 103P473X0600S 0.400 x 1.375 [10.16 x 34.93] 0.10 103P104X0600T** 103P104X0600S* 0.562 x 1.375 [14.27 x 34.93] 0.22 103P224X0600S* 0.670 x 1.875 [17.02 x 47.63] 103P224X0600T** 0.47 103P474X0600T 103P474X0600S 0.750 x 2.375 [19.05 x 60.32] * The Part Numbers given are for capacitance tolerance of ± 20%. To specify ± 10% tolerance, change X0 to X9. ** All standard inventoried Part Numbers will be stocked with a ± 10% tolerance (X9). ORDERING INFORMATION 103P TYPE 473 CAPACITANCE This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. Document Number: 42032 Revision 17-Nov-03 X0 CAPACITANCE TOLERANCE X0 = ± 20% X9 = ± 10% (Inventoried) 200 DC VOLTAGE RATING This is expressed in volts. For technical questions, contact [email protected] S TERMINAL S = Wire Leads T = Soldering Tab www.vishay.com 97