IL66/ILD66/ILQ66 Vishay Semiconductors Optocoupler, Photodarlington Output, with Internal RBE (Single, Dual, Quad Channel) FEATURES Single Channel A 1 6 B • Internal RBE for high stability C 2 5 C • Four available CTR categories per package type NC 3 4 E • BVCEO > 60 V • Standard DIP packages • Lead (Pb)-free component Dual Channel A 1 8 E C 2 7 C C 3 6 C A 4 5 E • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC AGENCY APPROVALS • UL1577, file no. E52744 system code H or J, double protection • DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending available with option 1 • BSI IEC 60950 IEC 60065 Quad Channel A 1 16 E C 2 15 C C 3 14 C A 4 13 E A 5 12 E C 6 11 C C 7 10 C A 8 9 E i179014 DESCRIPTION IL66, ILD66, and ILQ66 are optically coupled isolators employing gallium arsenide infrared emitters and silicon photodarlington detectors. Switching can be accomplished while maintaining a high degree of isolation between driving and load circuits, with no crosstalk between channels. ORDER INFORMATION PART REMARKS IL66-1 CTR ≥ 100 %, DIP-6 IL66-2 CTR ≥ 300 %, DIP-6 IL66-3 CTR ≥ 400 %, DIP-6 IL66-4 CTR ≥ 500 %, DIP-6 ILD66-1 CTR ≥ 100 %, DIP-8 ILD66-2 CTR ≥ 300 %, DIP-8 ILD66-3 CTR ≥ 400 %, DIP-8 ILD66-4 CTR ≥ 500 %, DIP-8 ILQ66-1 CTR ≥ 100 %, DIP-16 ILQ66-2 CTR ≥ 300 %, DIP-16 ILQ66-3 CTR ≥ 400 %, DIP-16 ILQ66-4 CTR ≥ 500 %, DIP-16 Document Number: 83638 Rev. 1.6, 13-Dec-07 For technical questions, contact: [email protected] www.vishay.com 1 IL66/ILD66/ILQ66 Vishay Semiconductors Optocoupler, Photodarlington Output, with Internal RBE (Single, Dual, Quad Channel) ORDER INFORMATION PART REMARKS IL66-4X009 CTR ≥ 500 %, SMD-8 (option 9) ILD66-2X007 CTR ≥ 300 %, SMD-8 (option 7) ILD66-3X009 CTR ≥ 400 %, SMD-8 (option 9) ILD66-4X009 CTR ≥ 500 %, SMD-8 (option 9) ILQ66-4X007 CTR ≥ 500 %, SMD-16 (option 7) ILQ66-4X009 CTR ≥ 500 %, SMD-16 (option 9) Note For additional information on the available options refer to option information. ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT VRM IF Pdiss 6.0 60 100 1.33 V mA mW mW/°C Pdiss 150 2.0 mW mW/°C VISO 5300 VRMS Ptot Ptot Ptot 250 400 500 3.3 5.33 6.67 ≥ 7.0 mW mW mW mW/°C mW/°C mW/°C mm ≥ 7.0 mm INPUT Peak reverse voltage Forward continuous current Power dissipation Derate linearly from 25 °C OUTPUT Power dissipation Derate from 25 °C COUPLER Isolation test voltage t = 1.0 s IL66 ILD66 ILQ66 IL66 ILD66 ILQ66 Total package power dissipation Derate linearly from 25 °C Creepage distance Clearance distance Comparative tracking index CTI 175 VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 VIO = 500 V, Tamb = 100 °C RIO ≥ 1011 Ω Storage temperature Tstg - 55 to + 125 °C Operating temperature Tamb - 55 to + 100 °C 10 s Isolation resistance Lead soldering time at 260 °C Ω Note Tamb = 25 °C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL Forward voltage IF = 20 mA Reverse current VR = 6.0 V VR = 0 V MIN. TYP. MAX. UNIT VF 1.25 1.5 V IR 0.1 10 µA CO 25 INPUT Capacitance www.vishay.com 2 For technical questions, contact: [email protected] pF Document Number: 83638 Rev. 1.6, 13-Dec-07 IL66/ILD66/ILQ66 Optocoupler, Photodarlington Output, with Internal RBE (Single, Dual, Quad Channel) Vishay Semiconductors ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. IC = 1.0 mA, IF = 0 A BVCEO 60 IC = 10 μA BVCBO 60 VCE = 50 V, IF = 0 A ICEO TYP. MAX. UNIT OUTPUT Collector emitter breakdown voltage Collector base breakdown voltage (IL66) Collector emitter leakage current V V 1.0 VCE = 10 V Capacitance collector emitter 100 nA 3.4 pF COUPLER IC = 10 mA, IF = 10 mA Saturation voltage, collector emitter VCEsat 0.9 1.0 V Note Tamb = 25 °C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. IL(D,Q)66-1 CTR 100 400 % IL(D,Q)66-2 CTR 300 500 % IF = 0.7 mA, VCE = 10 V IL(D,Q)66-3 CTR 400 500 % IF = 2.0 mA, VCE = 5.0 V IL(D,Q)66-4 CTR 500 750 % IF = 2.0 mA, VCE = 10 V Current transfer ratio MAX. UNIT SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL Rise time -1, -2, -4 VCC = 10 V Fall time -1, -2, -4 IF = 2.0 mA, RL = 100 Ω Rise time -3 Fall time -3 MIN. TYP. MAX. UNIT tr 200 µs tf 200 µs IF = 0.7 mA tr 200 µs VCC = 10 V, RL = 100 Ω tf 200 µs NON SATURATED TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified 2.0 1.3 NCTRce - Normalized CTRce VF - Forward Voltage (V) 1.4 TA = - 55 °C 1.2 TA = 25 °C 1.1 1.0 0.9 TA = 100 °C 0.8 0.7 1.5 VCE = 5 V 1.0 0.5 VCE = 1 V 0.0 0.1 iil66_01 Normalized to: VCE = 5 V IF = 2 mA 1 10 IF - Forward Current (mA) Fig. 1 - Forward Voltage vs. Forward Current Document Number: 83638 Rev. 1.6, 13-Dec-07 0.1 100 iil66_02 1 10 100 I F - LED Current (mA) Fig. 2 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current For technical questions, contact: [email protected] www.vishay.com 3 IL66/ILD66/ILQ66 Optocoupler, Photodarlington Output, with Internal RBE (Single, Dual, Quad Channel) Vishay Semiconductors 10000 Normalized to: VCE = 5 V IF = 10 mA 1.0 VCE = 1 V 0.8 0.6 0.4 0.2 100 VCE = 1 V 10 1 0.1 0.01 VCE = 5 V 0.0 0.1 1 10 100 0.001 0.1 1000 0 Fig. 3 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current 10 100 1000 I B - Base Current (µs) iil66_06 IF - LED Current (mA) iil66_03 Fig. 6 - Collector Emitter Current vs. LED Current 25000 10000 hFE - Forward Gain VCE = 1 V 1000 ICE - Collector Emitter Current (mA) VCE = 5 V 1000 I CE - Collector-emitter Current (mA) NCTRce - Normalized CTRce 1.2 100 VCE = 5 V 10 1 0.1 20000 VCE = 5 V 15000 10000 5000 VCE = 1 V 0.01 0.001 0 0.1 1 10 IF - LED Current (mA) iil66_04 1 0.1 100 Fig. 4 - Non-Saturated and Saturated Collector Emitter Current vs. LED Current 10 100 1000 IB - Base Current (µA) iil66_07 Fig. 7 - Non-Saturated and Saturated hFE vs. LED Current 1000 tpHL - High/Low Propagation Delay (µs) Icb - Photocurrent (µa) 50 100 10 1 40 10 kΩ VCC = 5 V Vth = 1.5 V 30 220 Ω 20 10 0 0.1 0.1 iil66_05 1 10 IF - LED Current (mA) Fig. 5 - Collector Base Photocurrent vs. LED Current www.vishay.com 4 0 100 5 10 15 IF - LED Current (mA) 20 iil66_08 Fig. 8 - High to Low Propagation Delay vs. Collector Load Resistance and LED Current For technical questions, contact: [email protected] Document Number: 83638 Rev. 1.6, 13-Dec-07 IL66/ILD66/ILQ66 Optocoupler, Photodarlington Output, with Internal RBE (Single, Dual, Quad Channel) Vishay Semiconductors tpLH - Low / High Propagation Delay - µs 150 10 kΩ 125 100 2 kΩ 75 VCC = 5 V Vth = 1.5 V 50 25 220 kΩ 0 0 5 10 15 20 IF - LED Current (mA) iil66_09 Fig. 9 - Low to High Propagation Delay vs. Collector Load Resistance and LED Current IF tD tR VO t PLH V th = 1.5 V t PHL tF tS iil66_10 Fig. 10 - Switching Waveform VCC = 10 V F = 10 kHz, DF = 50 % RL VO IF iil66_11 Fig. 11 - Switching Schematic Document Number: 83638 Rev. 1.6, 13-Dec-07 For technical questions, contact: [email protected] www.vishay.com 5 IL66/ILD66/ILQ66 Optocoupler, Photodarlington Output, with Internal RBE (Single, Dual, Quad Channel) Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 8.8 max. 7.62 ± 0.1 8.6 max. 0.3 A B 3.3 0.5 min. 4.2 ± 0.1 6.4 max. 0.58 max. 0.3 max. 1.54 2.54 nom. 9 ± 0.6 0.4 B 5.08 nom. A Weight: ca. 0.50 g Creepage distance: > 6 mm Air path: > 6 mm after mounting on PC board 6 5 4 technical drawings according to DIN specifications 14770 1 2 3 Pin one ID 4 3 2 1 5 6 7 8 0.255 (6.48) 0.268 (6.81) ISO method A 0.379 (9.63) 0.390 (9.91) 0.030 (0.76) 0.045 (1.14) 0.300 (7.62) 0.031 (0.79) 4° typ. typ. 0.130 (3.30) 0.150 (3.81) 0.050 (1.27) 10° 0.020 (0.51) 0.018 (0.46) 0.022 (0.56) i178006 www.vishay.com 6 0.035 (0.89) 0.100 (2.54) typ. 3° to 9° 0.230 (5.84) 0.110 (2.79) 0.250 (6.35) 0.130 (3.30) 0.008 (0.20) 0.012 (0.30) For technical questions, contact: [email protected] Document Number: 83638 Rev. 1.6, 13-Dec-07 IL66/ILD66/ILQ66 Optocoupler, Photodarlington Output, with Internal RBE (Single, Dual, Quad Channel) Vishay Semiconductors Pin one ID 8 7 6 5 4 3 2 1 0.255 (6.48) 0.265 (6.81) 9 10 11 12 13 14 15 16 ISO method A 0.779 (19.77) 0.790 (20.07) 0.030 (0.76) 0.045 (1.14) 0.300 (7.62) typ. 0.031 (0.79) 0.130 (3.30) 0.150 (3.81) 4° 0.018 (0.46) 0.022 (0.56) 0.020 (0.51) 0.035 (0.89) 0.100 (2.54) typ. 0.110 (2.79) 0.130 (3.30) 10° typ. 0.230 (5.84) 0.250 (6.35) 3° to 9° 0.050 (1.27) 0.008 (0.20) 0.012 (0.30) i178007 Option 7 Option 9 0.375 (9.53) 0.395 (10.03) 0.300 (7.62) typ. 0.300 (7.62) ref. 0.028 (0.7) min. 0.180 (4.6) 0.160 (4.1) 0.315 (8.0) min. 0.331 (8.4) min. 0.406 (10.3) max. Document Number: 83638 Rev. 1.6, 13-Dec-07 0.0040 (0.102) 0.0098 (0.249) 0.012 (0.30) typ. 0.020 (0.51) 0.040 (1.02) 0.315 (8.00) min. For technical questions, contact: [email protected] 15° max. 18494 www.vishay.com 7 IL66/ILD66/ILQ66 Vishay Semiconductors Optocoupler, Photodarlington Output, with Internal RBE (Single, Dual, Quad Channel) OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 8 For technical questions, contact: [email protected] Document Number: 83638 Rev. 1.6, 13-Dec-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1