ROHM BP5843A_10

Data Sheet
100VAC Input/Constant Current
Isolated High-power LED Driver for Illumination
BP5843A
Absolute Maximum Ratings
Dimensions (Unit : mm)
V
Vpk
kV
Maximum surface temperature
Tcmax
105
°C
Operating temperature range
Storage temperature range
Topr
Tstg
−20 to +80
−25 to +85
°C
°C
Conditions
1s (between primary and secondary)
Ambient temperature + module
self-heating Tcmax
Refer to derating curve
Typ.
141
350
−
−
85
Max.
170
369
12
0.5
−
Unit
V
mA
V
Vp-p
%
Conditions
3 4 5
9 10 11
0.75±0.1
1.3±0.2
0.5±0.05
P=2.54±0.2
11.05MAX.
4.75MAX.
Derating Curve
Derating Curve
5
Vi=141V, R1=0.82Ω (1%) ∗1
Vi=141V, lo=350mA
∗2
Vi=141V, lo=350mA
Vi=141V, Vo=12V, lo=350mA
Application Circuit
4
3
Operation Range
2
1
0
-30 -20 -10 0 10 20 30 40 50 60 70 80 90
Ambient Temperature Ta(°C)
Be sure to use fuse for safety
1
3
9
10 11
F1
R1
D1
LF1
C2
+
C1
C4
Function
Input terminal (+)
Skip
Input terminal (−)
NC
NC
Skip
Skip
Skip
Output capacitor connection terminal
LED connection terminal (cathode)
LED connection terminal (anode)
Output Current (A)
Output Characteristics
Pin No.
1
2
3
4
5
6
7
8
9
10
11
BP5843A
C3
1
2.54x10=25.4 TYP.
∗1 Maximum output current varies depending on ambient temperature ; please refer to derating curve.
∗2 Spike noise is not included in output ripple voltage.
ZNR1
15.8MAX.
MARKING SIDE
3.55MAX
Electrical Characteristics
Symbol Min.
Parameter
Input voltage range
113
Vi
Output current
332
Io
Output voltage range Vo
2.5
Output ripple voltage
−
Vp
Power conversion efficiency
80
η
32.6MAX.
DC
Marking Side
Unit
170
12
1.8
24.0MAX.
Limits
Vi
Vo
BV
4.0±1.0
Symbol
Output Power (W)
Parameter
Input voltage
Output voltage
Withstand voltage
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
Output characteristics
R1=0.91Ω
Operation Range
R1=
0
2
4
6
8 10 12
Output Voltage(V)
14
16
C5
Current Setting
Setting resistor : R1(Ω)
External Component Specifications
C1 : Input Capacitor
10µF/250V
C2 : Output Capacitor
40µF/25V ceramic capacitor
R1 : Output current setting
resistor
0.82Ω ±1% 1/4W (lo=350mA)
C3, C4: Noise Removal
Capacitor
Use if necessary
Capacitance : 0.1 to 0.22µF
Rated voltage : 250V or higher
C5 : Noise Removal Capacitor
2200pF (Basic insulation)
D1: Diode bridge
800V/1A
F1: Fuse
A fuse must be used for safety
LF1: Line Filter
10mH
ZNR1: Varistor
A varistor is required to protect against lightning surges
and static electricity.
www.rohm.com
©2010 ROHM Co., Ltd. All rights reserved.
Output current-Setting resistor
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0.24 0.26 0.28 0.30 0.32 0.34 0.36
Output current : (A)
How to calculate R1
R1=0.13741/(0.91 x lo-0.151)
lo : Output current
1/1
2010.01 - Rev.A
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
R1010A