PHILIPS PCK3807AD

INTEGRATED CIRCUITS
PCK3807A
1:10 LVTTL clock distribution device
Product data sheet
Supersedes data of 2003 Jun 27
Philips
Semiconductors
2004 Aug 27
Philips Semiconductors
Product data sheet
1:10 LVTTL clock distribution device
PCK3807A
• High speed: propagation delay < 3.5 ns (max)
• Very low CMOS power levels
• TTL compatible inputs and outputs
• 1:10 fanout
• Maximum output rise and fall times < 1.5 ns
• Low input capacitance: 2.5 pF typical
• VCC = 2.3 V to 3.6 V
• Overvoltage tolerance on inputs
• Available in SSOP, TSSOP, SO and QSOP packages
• >150 MHz operation
DESCRIPTION
This low skew clock driver offers 1:10 fan-out. The large fan out from
a single input reduces loading on the preceding driver and provides
an efficient clock distribution network. The PCK3807A offers low
capacitance inputs with hysteresis for improved noise margins.
Multiple power and grounds reduce noise. Typical applications are
clock and signal distribution.
The PCK3807A operates from a single 2.5 V or 3.3 V supply voltage
and over the full industrial temperature range of –40 °C to +85 °C.
FEATURES
• Low output skew < 120 ps (max)
• Very low duty cycle distortion < 200 ps (max) for VCC = 2.5 V
ORDERING INFORMATION
PACKAGES
TEMPERATURE RANGE
ORDER CODE
DRAWING NUMBER
20-Pin Plastic SO
–40 °C to +85 °C
PCK3807AD
SOT163-1
20-Pin Plastic SSOP
–40 °C to +85 °C
PCK3807ADB
SOT339-1
20-Pin Plastic TSSOP
–40 °C to +85 °C
PCK3807APW
SOT360-1
20-Pin Plastic SSOP (QSOP)
–40 °C to +85 °C
PCK3807ADS
SOT724-1
FUNCTIONAL BLOCK DIAGRAM
PIN CONFIGURATION
O1
O2
O3
O4
O5
IN
1
20
VCC
GND
2
19
O10
O1
3
18
O9
VCC
4
17
GND
O2
5
16
O8
GND
6
15
VCC
O3
7
14
O7
VCC
8
13
GND
O4
9
12
O6
GND
10
11
O5
IN
O6
SW00986
O7
PIN DESCRIPTION
O8
Symbol
IN
O9
O1 to O10
O10
SW00985
2004 Aug 27
2
Pin
Description
1
3, 5, 7, 9, 11, 12,
14, 16, 18, 19
GND
2, 10, 13, 17
VCC
20
Clock input
Clock outputs
Ground
Supply voltage
Philips Semiconductors
Product data sheet
1:10 LVTTL clock distribution device
PCK3807A
ABSOLUTE MAXIMUM RATINGS1
DESCRIPTION
MIN
MAX
UNIT
2
Terminal voltage with respect to GND
–0.5
+4.6
V
VTERM3
Terminal voltage with respect to GND
–0.5
+7
V
VTERM4
Terminal voltage with respect to GND
–0.5
VCC +0.5
V
Tstg
Storage temperature
–65
+150
°C
IO
DC output current
–60
+60
mA
SYMBOL
VTERM
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
2. VCC terminals.
3. Input terminal.
4. Outputs terminals.
CAPACITANCE
Tamb = +25 °C, f = 1.0 MHz
SYMBOL
PARAMETER
CONDITIONS
TYP
MAX
UNIT
Ci
Input capacitance
VIN = 0 V
2.5
4
pF
Co
Output capacitance
VOUT = 0 V
5.5
6
pF
NOTE:
1. This parameter is measured at characterization but not tested.
RECOMMENDED OPERATING CONDITIONS
SYMBOL
VCC
fIN
LIMITS
PARAMETER
DC supply voltage
MAX
2.3
3.6
V
MHz
Input signal frequency
Tamb
CL
Operating free-air temperature range
UNIT
MIN
0
150
–40
+85
°C
–
50
pF
Output capacitance load
160
LOAD = 15 pF AND 33 Ω
140
120
DYNAMIC
CURRENT
IDD (mA)
100
80
LOAD = 0
60
40
20
0
0
50
100
150
CLOCK FREQUENCY (MHz)
Figure 1. Dynamic current vs. clock frequency, VCC = 3.3 V
2004 Aug 27
3
200
SW02071
Philips Semiconductors
Product data sheet
1:10 LVTTL clock distribution device
PCK3807A
POWER SUPPLY CHARACTERISTICS
SYMBOL
PARAMETER
CONDITIONS
DICC
Quiescent power supply current,
TTL inputs HIGH
VCC = max; VIN = VCC – 0.6 V
ICCD
Dynamic power supply current
VCC = 2.7 V
Input toggling
gg g
50% duty cycle
VIN = VCC or GND
VCC = 3.6 V
IC
Total power supply current
Dynamic power supply current
MIN
TYP
MAX
UNIT
–
3
30
mA
Outputs open
–
0.31
0.45
mA/MHz
15 pF and 33 Ω load
–
1.0
–
Outputs open
–
0.5
0.75
15 pF and 33 Ω load
–
1.5
–
VCC = 2.7 V
Input toggling
50% duty cycle
O
Outputs
open
VIN = VCC
VIN = GND
fi = 50 MHz
–
15.5
22.8
VIN = VCC
VIN = GND
fi = 150 MHz
–
50
75
VCC = 3.6 V
fi = 50 MHz
–
25
37
fi = 150 MHz
–
75
115
mA
NOTES:
1. For conditions shown as Max or Min, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 3.3 V, +25°C ambient.
3. Per TTL driven input (VIN = VCC – 0.6 V).
4. This parameter is not directly testable, but is derived for use in Total Power Supply calculations.
5. Values for these conditions are examples of the Ic formula. These limits are guaranteed but not tested.
6. IC = IQUIESCENT+ IINPUTS + IDYNAMIC
IC = ICC + DlCC DHNT + ICCD (fi)
ICC = Quiescent Current (ICCL, ICCH and ICCZ)
Dlcc = Power Supply Current for a TTL High Input (VIN = VCC – 0.6 V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fi = Input Frequency
All currents are in milliamps and all frequencies are in MHz
2004 Aug 27
4
Philips Semiconductors
Product data sheet
1:10 LVTTL clock distribution device
PCK3807A
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
Tamb = –40 °C to +85 °C, VCC = 3.3 V ± 0.3 V, unless otherwise specified
SYMBOL
VIH
VIL
IIH
TEST CONDITIONS1
PARAMETER
TYP
MAX
VCC = 3.0 V to 3.6 V
2
–
5.5
HIGH-level input voltage (I/O pins)
VCC = 2.3 V to 2.7 V
1.7
–
3.6
LOW-level input voltage (Input pins)
VCC = 3.0 V to 3.6 V
–0.5
–
0.8
LOW-level input voltage (I/O pins)
VCC = 2.3 V to 2.7 V
–0.5
–
0.7
HIGH-level input current (Input pins)
VCC = Max
VI = 5.5 V
–
–
±1
VI = VCC
–
–
±1
VI = GND
–
–
±1
VI = GND
HIGH-level input current (I/O pins)
IIL
MIN
HIGH-level input voltage (Input pins)
LOW-level input current (Input pins)
VCC = Max
UNIT
V
V
A
A
–
–
±1
VIK
Clamp diode voltage
VCC = Min; IIN = –18 mA
–
–0.7
–1.0
V
IODH
HIGH-level input current
VCC = 3.3 V; VIN = VIH or VIL; Vo =1.5 V3
–36
–120
–150
mA
IODL
LOW-level input current
VCC = 3.3 V; VIN = VIH or VIL; Vo =1.5
V3
50
150
200
mA
VOH
HIGH-level output voltage
VCC = 2.3 V to 3.6 V
IOH = –0.1 mA
VCC – 0.2
–
–
V
VCC = 2.3 V
IOH = –8 mA
1.9
–
–
VCC = 3.0 V
IOH = –8 mA
2.46
3
–
VCC = 2.3 V to 3.6 V
IOL = 0.1 mA
–
–
0.2
VCC = 2.3 V
IOL = 8 mA
–
–
0.3
VCC = 3.0 V
IOL = 16 mA
–
0.2
0.4
VCC = 3.0 V
IOL = 24 mA
–
0.3
0.5
LOW-level input current (I/O pins)
VOL
LOW-level output voltage
V
IOFF
Input power off leakage
VCC = 0 V; VIN = 4.5 V
–
–
±1
lOS
Short circuit current5
VCC = Max; VO = GND4
0
–155
–240
mA
Vhys
Input hysteresis
–
–
150
–
mV
A
ICCL
Quiescent power supply current
VCC= Max
–
0.1
10
A
VIN = GND or VCC
ICCH
NOTES:
1. For conditions shown as Max or Min, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at VCC = 3.3 V, +25 °C ambient.
3. Duration of the test should not exceed one second.
4. Not more than one output shorted at one time. Duration of the test should not exceed one second.
5. This parameter is guaranteed but not tested.
6. VOH = VCC – 0.6 V at rated current.
2004 Aug 27
5
Philips Semiconductors
Product data sheet
1:10 LVTTL clock distribution device
PCK3807A
SWITCHING CHARACTERISTICS OVER OPERATING RANGE – INDUSTRIAL3,4
Tamb = –40 °C to +85 °C, VCC = 3.3 V ± 0.3 V, unless otherwise specified
SYMBOL
tPLH
tPHL
Propagation delay
tR
Output rise time
tF
Output fall time
2.5 V ± 0.2 V
CONDITIONS1
PARAMETER
50 to VCC/2; CL = 10 pF
(See Figure 2)
or
tSK(o)
Output skew: skew between outputs of same
package (same transition)
i ti
50 AC ttermination;
CL = 10 pF (See Figure 3);
tSK(p)
Pulse skew: skew between opposite transitions
of same output (|tPHL–tPLH|)
f ≤ 150 MHz; Outputs
connected in groups of two
tSK(t)
Package skew: skew between outputs of different
packages at same power supply voltage,
temperature, package type and speed grade
tPLH
tPHL
Propagation delay
tR
Output rise time
tF
Output fall time
50 to VCC/2; CL = 22 pF
(See Figure 2)
or
MIN2
3.3 V ± 0.3 V
MIN2
MAX
MAX
UNIT
1.5
2.7
1.3
2.5
ns
–
1.0
–
1.0
ns
–
1.0
1.0
ns
–
0.12
–
0.12
ns
–
0.3
–
0.45
ns
–
0.6
–
0.6
ns
1.5
3.5
1.5
3
ns
–
1.0
–
1.0
ns
–
1.0
–
1.0
ns
–
0.12
–
0.12
ns
–
0.3
–
0.45
ns
–
0.6
–
0.6
ns
1.5
4.0
1.5
4
ns
tSK(o)
Output skew: skew between outputs of same
package (same transition)
50 AC termination;
i i
CL = 22 pF (See Figure 3);
tSK(p)
Pulse skew: skew between opposite transitions
of same output (|tPHL–tPLH|)
f ≤ 150 MHz; Outputs
connected in groups of two
tSK(t)
Package skew: skew between outputs of different
packages at same power supply voltage,
temperature, package type and speed grade
tPLH
tPHL
Propagation delay
tR
Output rise time
–
1.0
–
1.0
ns
tF
Output fall time
–
1.0
–
1.0
ns
tSK(o)
Output skew: skew between outputs of same
package (same transition)
–
0.35
–
0.35
ns
tSK(p)
Pulse skew: skew between opposite transitions
of same output (|tPHL–tPLH|)
–
0.35
–
0.35
ns
tSK(t)
Package skew: skew between outputs of different
packages at same power supply voltage,
temperature, package type and speed grade
–
1.0
–
0.75
ns
tjitter
RMS jitter
–
1.0
–
1.0
ps
fMAX
Maximum output frequency
Functional to 400 MHz
–
400
–
400
MHz
tPLH
tPHL
Propagation delay
CL = 50 pF; f ≤ 40 MHz
(See Figure 5)
1.5
4.5
1.5
4.0
ns
tR
Output rise time
–
1.5
–
1.5
ns
tF
Output fall time
–
1.5
–
1.5
ns
tSK(o)
Output skew: skew between outputs of same
package (same transition)
–
0.35
–
0.35
ns
tSK(P)
Pulse skew: skew between opposite transitions
of same output (|tPHL–tPLH|)
–
0.75
–
0.75
ns
tSK(T)
Package skew: skew between outputs of different
packages at same power supply voltage,
temperature, package type and speed grade
–
1
–
0.75
ns
CL = 30 pF; f ≤ 67 MHz
(See Figure 4)
NOTES:
1. See test circuits and waveforms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
3. tPLH, tPHL, tSK(t) are production tested. All other parameters guaranteed but not production tested.
4. Propagation delay range indicated by Min and Max limit is due to VCC, operating temperature and process parameters. These propagation
delay limits do not imply skew.
2004 Aug 27
6
Philips Semiconductors
Product data sheet
1:10 LVTTL clock distribution device
PCK3807A
TEST CIRCUITS
V CC
V CC
V CC
100 Ω
V IN
V IN
V OUT
PULSE
GENERATOR
100 Ω
RT
V OUT
PULSE
GENERATOR
D.U.T.
D.U.T.
10 pF
50 Ω
RT
10 pF
220 pF
SW00976
SW00975
Figure 2. ZO = 50 W TO VCC/2, CL = 10 pF
The capacitor value for ac termination is determined by the
operating frequency. For very low frequencies a higher capacitor
value should be selected.
Figure 3. ZO = 50 W AC termination, CL = 10 pF
VCC
VCC
VOUT
VIN
PULSE
GENERATOR
VOUT
VIN
D.U.T.
PULSE
GENERATOR
CL
30 pF
RT
D.U.T.
RT
SW00977
SW00978
Figure 4. CL = 30 pF circuit
2004 Aug 27
CL
50 pF
Figure 5. CL = 50 pF circuit
7
Philips Semiconductors
Product data sheet
1:10 LVTTL clock distribution device
PCK3807A
TIMING DIAGRAMS
VI
VI
VM
VM
INPUT
0V
INPUT
t PLH1
t PHL1
VOH
0V
t PLH
t PHL
VM
VIH
VOH
OUTPUT
VOL
1
t SK(o)
t SK(o)
VOH
VIL
VM
OUTPUT
OUTPUT
2
VOL
t PLH2
tF
tR
t PHL2
t SK(o) = |t PLH2
SW00980
–
t PLH1 |
or
|t PHL2 – t PHL1 |
SW00981
Figure 6. Package delay (see Table 1)
Figure 7. Output skew – tSK(O) (see Table 1)
VI
VI
VM
VM
INPUT
0V
tPHL1
tPLH1
VOH
0V
INPUT
VM
t PHL
t PLH
VOH
VOL
PACKAGE 1 OUTPUT
t SK(t )
VM
t SK(t )
VOH
VM
VOL
OUTPUT
PACKAGE 2 OUTPUT
t SK(p) = |t PHL
–
t PLH |
tPLH2
t SK(t ) = |t PLH2
SW00982
VM
For VCC = 3.3 ± 0.3 V
3.0 V
1.5 V
For VCC = 2.5 ± 0.2 V
VCC
VCC/2
2004 Aug 27
tPLH1 |
or
|t PHL2
Figure 9. Package skew – tSK(y) (see Table 1)
Table 1. Reference levels
VI
–
–
t PHL1 |
SW00983
Figure 8. Pulse skew – tSK(p) (see Table 1)
Reference level
VOL
t PHL2
8
Philips Semiconductors
Product data sheet
1:10 LVTTL clock distribution device
PCK3807A
SO20: plastic small outline package; 20 leads; body width 7.5 mm
2004 Aug 27
9
SOT163-1
Philips Semiconductors
Product data sheet
1:10 LVTTL clock distribution device
PCK3807A
SSOP20: plastic shrink small outline package; 20 leads; body width 5.3 mm
2004 Aug 27
10
SOT339-1
Philips Semiconductors
Product data sheet
1:10 LVTTL clock distribution device
PCK3807A
TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm
2004 Aug 27
11
SOT360-1
Philips Semiconductors
Product data sheet
1:10 LVTTL clock distribution device
PCK3807A
SSOP20: plastic shrink small outline package; 20 leads;
body width 3.9 mm; lead pitch 0.635 mm
2004 Aug 27
12
SOT724-1
Philips Semiconductors
Product data sheet
1:10 LVTTL clock distribution device
PCK3807A
REVISION HISTORY
Rev
Date
Description
_2
20040827
Product data sheet (9397 750 14007). Supersedes data of 2003 Jun 27 (9397 750 11683).
Modifications:
• Recommended Operating Conditions table on page 3: change VCC Min. limit from 2.5 V to 2.3 V.
_1
20030627
Product data (9397 750 11683); ECN 853-2431 30019 dated 18 June 2003. Initial version
Data sheet status
Level
Data sheet status [1]
Product
status [2] [3]
Definitions
I
Objective data
Development
This data sheet contains data from the objective specification for product development.
Philips Semiconductors reserves the right to change the specification in any manner without notice.
II
Preliminary data
Qualification
This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III
Product data
Production
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL
http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given
in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no
representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be
expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree
to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes in the products—including circuits, standard cells, and/or software—described
or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated
via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys
no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent,
copyright, or mask work right infringement, unless otherwise specified.
 Koninklijke Philips Electronics N.V. 2004
All rights reserved. Printed in U.S.A.
Contact information
For additional information please visit
http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
Date of release: 08-04
For sales offices addresses send e-mail to:
[email protected].
Document order number:
Philips
Semiconductors
2004 Aug 27
13
9397 750 14007