Philips Semiconductors Product specification Damper diode fast, high-voltage FEATURES BY329-1500, BY329-1500S SYMBOL • Low forward volt drop • Fast switching • Soft recovery characteristic • High thermal cycling performance • Low thermal resistance QUICK REFERENCE DATA VR = 1500 V k 1 VF ≤ 1.35 V / 1.5 V a 2 IF(peak) = 6 A (f = 16 kHz) IF(peak) = 6 A (f = 70 kHz) IFSM ≤ 75 A trr ≤ 230 ns / 160 ns GENERAL DESCRIPTION PINNING Glass-passivated double diffused rectifier diode featuring low forward voltage drop, fast reverse recovery and soft recovery characteristic. The device is intended for use in TV receivers and PC monitors. PIN SOD59 (TO220AC) DESCRIPTION 1 cathode 2 anode tab tab cathode The BY329 series is supplied in the conventional leaded SOD59 (TO220AC) package. 2 1 LIMITING VALUES Limiting values accordance with the Absolute Maximum System (IEC 134). SYMBOL PARAMETER VRSM CONDITIONS MIN. MAX. UNIT - 1500 V - 1500 V - 1300 V VRWM Peak non-repetitive peak reverse voltage Peak repetitive reverse voltage Crest working reverse voltage IF(peak) Peak working forward current f = 16 kHz f = 70 kHz - IFRM Peak repetitive forward current RMS forward current Peak non-repetitive forward current t = 25 µs; δ = 0.5; Tmb ≤ 123 ˚C - 14 A - 11 75 A A -40 - 150 150 ˚C ˚C VRRM BY329 IF(RMS) IFSM Tstg Tj Storage temperature Operating junction temperature t = 10 ms sinusoidal; Tj = 150 ˚C prior to surge; with reapplied VRWM(max) -1500 6 - -1500S 6 A A THERMAL RESISTANCES SYMBOL PARAMETER Rth j-mb Rth j-a CONDITIONS Thermal resistance junction to mounting base Thermal resistance junction to in free air ambient September 1998 1 MIN. TYP. MAX. UNIT - - 2.0 K/W - 60 - K/W Rev 1.100 Philips Semiconductors Product specification Damper diode fast, high-voltage BY329-1500, BY329-1500S STATIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS TYP. MAX. UNIT BY329 1500 1500S 1500 1500S VF Forward voltage IR Reverse current IF = 6.5 A IF = 6.5 A; Tj = 125 ˚C VR = 1300 V VR = 1300 V; Tj = 125 ˚C 1.1 1.05 - 1.3 1.2 250 1 1.45 1.35 - 1.6 1.5 250 1 V V µA mA DYNAMIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS TYP. MAX. BY329 1500 1500S trr Reverse recovery time Qs Vfr tfr Reverse recovery charge Peak forward recovery voltage Forward recovery time I IF = 1 A; VR ≥ 30 V; dIF/dt = 50A/µs IF = 2 A; -dIF/dt = 20 A/µs IF = 6.5A; dIF/dt = 50A/µs IF = 6.5A; dIF/dt = 50A/µs F I 1500 1500S 0.18 0.13 0.23 0.16 µs 1.6 17 210 0.7 23 220 2.0 30 300 0.95 40 320 µC V ns dI F UNIT F dt trr 10% time tfr time VF Qs V VF 5V fr I 25% 100% R time Fig.1. Definition of Vfr and tfr September 1998 Fig.2. Definition of trr and Qs 2 Rev 1.100 Philips Semiconductors Product specification Damper diode fast, high-voltage BY329-1500, BY329-1500S IF / A VCC BY32915S 30 Tj = 125 C Tj = 25 C 20 Line output transformer LY 10 Cf Cs max D1 deflection transistor 0 Fig.3. Basic horizontal deflection circuit. 100 typ Maximum pulse width / us 0 0.5 1 1.5 VF / V 2 Fig.6. BY329-1500S Typical and maximum forward characteristic IF = f(VF); parameter Tj BY459X-1500 10 Transient thermal impedance, Zth j-mb (K/W) VRRM V 1 pulse width tp time period T 0.1 10 PD 0.01 1 10 0.001 1us 100 line frequency / kHz Fig.4. Maximum allowable pulse width tp versus line frequency; Basic horizontal deflection circuit. 30 IF / A tp D= T 10us tp T t 100us 1ms 10ms 100ms 1s pulse width, tp (s) BY229 10s Fig.7. Transient thermal impedance Zth = f(tp) BY32915 Tj = 125 C Tj = 25 C 20 10 typ max 0 0 0.5 1 1.5 VF / V 2 Fig.5. BY329-1500 Typical and maximum forward characteristic IF = f(VF); parameter Tj September 1998 3 Rev 1.100 Philips Semiconductors Product specification Damper diode fast, high-voltage BY329-1500, BY329-1500S MECHANICAL DATA Dimensions in mm 4,5 max Net Mass: 2 g 10,3 max 1,3 3,7 2,8 5,9 min 15,8 max 3,0 max not tinned 3,0 13,5 min 1,3 max 1 (2x) 2 0,9 max (2x) 5,08 0,6 2,4 Fig.8. SOD59 (TO220AC). pin 1 connected to mounting base. Notes 1. Refer to mounting instructions for TO220 envelopes. 2. Epoxy meets UL94 V0 at 1/8". September 1998 4 Rev 1.100 Philips Semiconductors Product specification Damper diode fast, high-voltage BY329-1500, BY329-1500S DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1998 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. September 1998 5 Rev 1.100