Philips Semiconductors Product specification Damper diode ultra fast, high-voltage FEATURES BY559X-1500U SYMBOL • Low forward volt drop • Low forward recovery voltage • Ultra Fast switching • Soft recovery characteristic • High thermal cycling performance • Low thermal resistance QUICK REFERENCE DATA VR = 1500 V k 1 VF ≤ 1.5 V a 2 Vfr ≤ 8 V trr ≤ 130 ns IFWM = 10 A IFSM ≤ 160 A GENERAL DESCRIPTION A double diffused rectifier diode in a plastic envelope, featuring ultra fast forward and reverse recovery and low forward voltage. The device is intended for use as a damper diode in horizontal deflection circuits of large screen monitors and workstations in applications up to 150kHz. PINNING PIN SOD113 DESCRIPTION case 1 cathode 2 anode case isolated 1 2 The BY559 series is supplied in the conventional leaded SOD59 and SOD113 packages. LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL PARAMETER VRRM VRWM IFWM IFRM IFSM Peak repetitive reverse voltage Crest working reverse voltage Peak working forward current Peak repetitive forward current Peak non-repetitive forward current Tstg Tj Storage temperature Operating junction temperature CONDITIONS MIN. MAX. UNIT - 1500 1300 10 150 160 V V A A A -40 - 150 150 ˚C ˚C f = 120 kHz; t = 100 µs t = 10 ms sinusoidal; Tj = 150 ˚C prior to surge; with reapplied VRWM(max) ISOLATION LIMITING VALUE & CHARACTERISTIC Ths = 25 ˚C unless otherwise specified SYMBOL PARAMETER CONDITIONS Visol R.M.S. isolation voltage from both terminals to external heatsink f = 50-60 Hz; sinusoidal waveform; R.H. ≤ 65% ; clean and dustfree Cisol Capacitance from both terminals f = 1 MHz to external heatsink April 1999 1 MIN. TYP. - - 10 MAX. UNIT 2500 V - pF Rev 1.100 Philips Semiconductors Product specification Damper diode ultra fast, high-voltage BY559X-1500U THERMAL RESISTANCES SYMBOL PARAMETER CONDITIONS Rth j-hs Thermal resistance junction to heatsink Thermal resistance junction to ambient Rth j-a MIN. TYP. MAX. UNIT with heatsink compound - - 4.8 K/W in free air - 55 - K/W MIN. TYP. MAX. UNIT - 1.7 1.2 - 2.05 1.5 0.5 2.0 V V mA mA MIN. TYP. MAX. UNIT - 6 130 100 0.2 8 180 130 0.3 V ns ns µC STATIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS VF Forward voltage IR Reverse current IF = 6.5 A IF = 6.5 A; Tj = 125 ˚C VR = VRWMmax VR = VRWMmax; Tj = 125 ˚C DYNAMIC CHARACTERISTICS Tj = 25 ˚C unless otherwise stated SYMBOL PARAMETER CONDITIONS Vfr tfr trr Qs Forward recovery voltage Forward recovery time Reverse recovery time Reverse recovery charge IF = 6.5 A; dIF/dt = 50 A/µs IF = 6.5 A; dIF/dt = 50 A/µs; VF = 5 V IF = 1 A; -dIF/dt = 50 A/µs; VR ≥ 30 V IF = 2 A; -dIF/dt = 20 A/µs; VR ≥ 30 V April 1999 2 Rev 1.100 Philips Semiconductors Product specification Damper diode ultra fast, high-voltage I BY559X-1500U 20 F IF / A Tj = 25 C Tj = 125 C max typ 15 10% time tfr 10 VF 5 V VF 5V / 2V fr 0 0 1 2 VF / V time Fig.1. Definition of Vfr and tfr I dI F 3 4 Fig.4. Typical and maximum forward characteristic IF = f(VF); parameter Tj F Zth j- hs (K/W) dt 10 trr 1 time 0.1 Qs I 100% 25% PD 0.01 tp D = tp/T Single pulse t T 0.001 1E-06 R Fig.2. Definition of trr and Qs 100 1E-05 1E-04 1E-03 1E-02 tp (s) 1E-01 1E+00 1E+01 Fig.5. Transient thermal impedance Zth = f(tp) Maximum pulse width / us VRRM V pulse width tp time period T 10 1 10 100 line frequency / kHz 1000 Fig.3. Maximum allowable pulse width tp versus line frequency; Basic horizontal deflection circuit. April 1999 3 Rev 1.100 Philips Semiconductors Product specification Damper diode ultra fast, high-voltage BY559X-1500U MECHANICAL DATA Dimensions in mm Plastic single-ended package; isolated heatsink mounted; 1 mounting hole; 2-leads TO-220 'full pack' SOD113 Net Mass: 2 g A A1 E P z q m T D HE j L1 (1) k Q L 1 b1 2 c w M b e 0 10 20 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 b b1 c D E e HE max. j k L mm 4.6 4.0 2.9 2.5 0.9 0.7 1.1 0.9 0.7 0.4 15.8 15.2 10.3 9.7 5.08 19.0 2.7 2.3 0.6 0.4 14.4 13.5 (1) L1 3.3 2.8 m P Q q T w z(2) 6.5 6.3 3.2 3.0 2.6 2.3 2.6 2.55 0.4 0.8 Notes 1. Terminals are uncontrolled within zone L1. 2. z is depth of T. OUTLINE VERSION SOD113 REFERENCES IEC JEDEC 2-lead TO-220 EIAJ EUROPEAN PROJECTION ISSUE DATE 97-06-11 Fig.6. SOD113; The seating plane is electrically isolated from all terminals. Notes 1. Refer to mounting instructions for F-pack envelopes. 2. Epoxy meets UL94 V0 at 1/8". April 1999 4 Rev 1.100 Philips Semiconductors Product specification Damper diode ultra fast, high-voltage BY559X-1500U DEFINITIONS Data sheet status Objective specification This data sheet contains target or goal specifications for product development. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Product specification This data sheet contains final product specifications. Limiting values Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Philips Electronics N.V. 1999 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. April 1999 5 Rev 1.100