INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines 74HC/HCT366 Hex buffer/line driver; 3-state; inverting Product specification File under Integrated Circuits, IC06 December 1990 Philips Semiconductors Product specification Hex buffer/line driver; 3-state; inverting 74HC/HCT366 The 74HC/HCT366 are hex inverting buffer/line drivers with 3-state outputs. The 3-state outputs (nY) are controlled by the output enable inputs (OE1, OE2). FEATURES • Inverting outputs • Output capability: bus driver A HIGH on OEn causes the outputs to assume a high impedance OFF-state. • ICC category: MSI The ”366” is identical to the “365” but has inverting outputs. GENERAL DESCRIPTION The 74HC/HCT366 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns TYPICAL SYMBOL PARAMETER CONDITIONS UNIT HC tPHL/ tPLH propagation delay nA to nY CI input capacitance CPD power dissipation capacitance per buffer CL = 15 pF; VCC = 5 V notes 1 and 2 Notes 1. CPD is used to determine the dynamic power dissipation (PD in µW): PD = CPD × VCC2 × fi + ∑ (CL × VCC2 × fo) where: fi = input frequency in MHz fo = output frequency in MHz ∑ (CL × VCC2 × fo) = sum of outputs CL = output load capacitance in pF VCC = supply voltage in V 2. For HC the condition is VI = GND to VCC For HCT the condition is VI = GND to VCC − 1.5 V ORDERING INFORMATION See “74HC/HCT/HCU/HCMOS Logic Package Information”. December 1990 2 HCT 10 11 ns 3.5 3.5 pF 30 30 pF Philips Semiconductors Product specification Hex buffer/line driver; 3-state; inverting 74HC/HCT366 PIN DESCRIPTION PIN NO. SYMBOL NAME AND FUNCTION 1, 15 OE1, OE2 output enable inputs (active LOW) 2, 4, 6, 10, 12, 14 1A to 6A data inputs 3, 5, 7, 9, 11, 13 1Y to 6Y data outputs 8 GND ground (0 V) 16 VCC positive supply voltage Fig.1 Pin configuration. December 1990 Fig.2 Logic symbol. 3 Fig.3 IEC logic symbol. Philips Semiconductors Product specification Hex buffer/line driver; 3-state; inverting 74HC/HCT366 FUNCTION TABLE INPUTS OUTPUT OE1 OE2 nA nY L L X H L L H X L H X X H L Z Z Notes 1. H = HIGH voltage level L = LOW voltage level X = don’t care Z = high impedance OFF-state Fig.4 Functional diagram. Fig.5 Logic diagram. December 1990 4 Philips Semiconductors Product specification Hex buffer/line driver; 3-state; inverting 74HC/HCT366 DC CHARACTERISTICS FOR 74HC For the DC characteristics see “74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: bus driver ICC category: MSI AC CHARACTERISTICS FOR 74HC GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (°C) TEST CONDITIONS 74HC SYMBOL PARAMETER +25 −40 to +85 min. typ. max. min. max. −40 to +125 UNIT V WAVEFORMS CC (V) min. max. tPHL/ tPLH propagation delay nA to nY 33 12 10 100 20 17 125 25 21 150 30 26 ns 2.0 4.5 6.0 Fig.6 tPZH/ tPZL 3-state output enable time OEn to nY 44 16 13 150 30 26 190 38 33 225 45 38 ns 2.0 4.5 6.0 Fig.7 tPHZ/ tPLZ 3-state output disable time OEn to nY 55 20 16 150 30 26 190 38 33 225 45 38 ns 2.0 4.5 6.0 Fig.7 tTHL/ tTLH output transition time 14 5 4 60 12 10 75 15 13 90 18 15 ns 2.0 4.5 6.0 Fig.6 December 1990 5 Philips Semiconductors Product specification Hex buffer/line driver; 3-state; inverting 74HC/HCT366 DC CHARACTERISTICS FOR 74HCT For the DC characteristics see “74HC/HCT/HCU/HCMOS Logic Family Specifications”. Output capability: bus driver ICC category: MSI Note to HCT types The value of additional quiescent supply current (∆ICC) for a unit load of 1 is given in the family specifications. To determine ∆ICC per input, multiply this value by the unit load coefficient shown in the table below. INPUT UNIT LOAD COEFFICIENT OE1 OE2 nA 1.00 0.90 1.00 AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (°C) TEST CONDITIONS 74HCT SYMBOL PARAMETER −40 to +85 typ. max. min. max. min. max. tPHL/ tPLH propagation delay nA to nY 13 24 30 36 ns 4.5 Fig.6 tPZH/ tPZL 3-state output enable time OEn to nY 16 35 44 53 ns 4.5 Fig.7 tPHZ/ tPLZ 3-state output disable time OEn to nY 20 35 44 53 ns 4.5 Fig.7 tTHL/ tTLH 5 12 15 18 ns 4.5 Fig.6 min. output transition time December 1990 6 −40 to +125 UNIT V WAVEFORMS CC (V) +25 Philips Semiconductors Product specification Hex buffer/line driver; 3-state; inverting 74HC/HCT366 AC WAVEFORMS (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. Fig.6 Waveforms showing the input (nA) to output (nY) propagation delays and the output transition times. (1) HC : VM = 50%; VI = GND to VCC. HCT: VM = 1.3 V; VI = GND to 3 V. Fig.7 Waveforms showing the 3-state enable and disable times. PACKAGE OUTLINES See “74HC/HCT/HCU/HCMOS Logic Package Outlines”. December 1990 7