PSMN1R2-25YL N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK Rev. 01 — 25 June 2009 Product data sheet 1. Product profile 1.1 General description Logic level N-channel MOSFET in LFPAK package qualified to 150 °C. This product is designed and qualified for use in a wide range of industrial, communications and domestic equipment. 1.2 Features and benefits Advanced TrenchMOS provides low RDSon and low gate charge Improved mechanical and thermal characteristics High efficiency gains in switching power converters LFPAK provides maximum power density in a Power SO8 package 1.3 Applications DC-to-DC converters Motor control Lithium-ion battery protection Server power supplies Load switching 1.4 Quick reference data Table 1. Quick reference Symbol Parameter Conditions Min Typ Max Unit - - 25 V - - 100 A - - 121 W -55 - 150 °C VGS = 10 V; Tj(init) = 25 °C; ID = 100 A; Vsup ≤ 25 V; RGS = 50 Ω; unclamped - - 677 mJ VGS = 4.5 V; ID = 25 A; VDS = 12 V; see Figure 12; see Figure 13 - 11.9 - nC - 50.6 - nC VDS drain-source voltage Tj ≥ 25 °C; Tj ≤ 150 °C ID drain current Tmb = 25 °C; VGS = 10 V; see Figure 1 Ptot total power dissipation Tmb = 25 °C; see Figure 2 Tj junction temperature [1] Avalanche ruggedness EDS(AL)S non-repetitive drain-source avalanche energy Dynamic characteristics QGD gate-drain charge QG(tot) total gate charge PSMN1R2-25YL NXP Semiconductors N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK Table 1. Quick reference …continued Symbol Parameter Conditions Min Typ Max Unit VGS = 10 V; ID = 15 A; Tj = 100 °C; see Figure 11 - - 1.6 mΩ VGS = 10 V; ID = 15 A; Tj = 25 °C; see Figure 10 - 0.9 1.2 mΩ Static characteristics RDSon [1] drain-source on-state resistance Continuous current is limited by package. 2. Pinning information Table 2. Pinning information Pin Symbol Description 1 S source 2 S source 3 S source 4 G gate mb D drain Simplified outline Graphic symbol D G mbb076 1 2 3 S 4 SOT1023 (LFPAK2) 3. Ordering information Table 3. Ordering information Type number PSMN1R2-25YL Package Name Description Version LFPAK2 Plastic single-ende surface-mounted package (LFPAK2); 4 leads SOT1023 PSMN1R2-25YL_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 25 June 2009 2 of 13 PSMN1R2-25YL NXP Semiconductors N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK 4. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VDS drain-source voltage Tj ≥ 25 °C; Tj ≤ 150 °C - 25 V VDGR drain-gate voltage Tj ≥ 25 °C; Tj ≤ 150 °C; RGS = 20 kΩ VGS gate-source voltage ID drain current - 25 V -20 20 V VGS = 10 V; Tmb = 100 °C; see Figure 1 [1] - 100 A VGS = 10 V; Tmb = 25 °C; see Figure 1 [1] - 100 A IDM peak drain current tp ≤ 10 µs; pulsed; Tmb = 25 °C; see Figure 3 - 815 A Ptot total power dissipation Tmb = 25 °C; see Figure 2 - 121 W Tstg storage temperature -55 150 °C Tj junction temperature -55 150 °C Tsld(M) peak soldering temperature - 260 °C - 100 A - 815 A - 677 mJ Source-drain diode IS source current Tmb = 25 °C; [1] ISM peak source current tp ≤ 10 µs; pulsed; Tmb = 25 °C Avalanche ruggedness non-repetitive VGS = 10 V; Tj(init) = 25 °C; ID = 100 A; Vsup ≤ 25 V; drain-source avalanche RGS = 50 Ω; unclamped energy EDS(AL)S [1] Continuous current is limited by package. 003aad139 300 ID (A) Pder (%) 200 80 100 40 0 0 0 Fig 1. 03aa15 120 50 100 150 Tmb (°C) 200 0 100 150 200 Tmb (°C) Continuous drain current as a function of mounting base temperature Fig 2. Normalized total power dissipation as a function of mounting base temperature PSMN1R2-25YL_1 Product data sheet 50 © NXP B.V. 2009. All rights reserved. Rev. 01 — 25 June 2009 3 of 13 PSMN1R2-25YL NXP Semiconductors N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK 003aad199 104 ID (A) 103 Limit Rdson = VDS / ID 10 us 10 2 100 us DC 1 ms 10 10 ms 100 ms 1 10-1 10-1 Fig 3. 1 10 102 VDS (V) Safe operating area; continuous and peak drain currents as a function of drain-source voltage 5. Thermal characteristics Table 5. Thermal characteristics Symbol Parameter Conditions Rth(j-mb) thermal resistance from see Figure 4 junction to mounting base Min Typ Max Unit - 0.4 1 K/W 003aad142 1 Zth (j-mb) (K/W) 10 δ = 0.5 -1 0.2 0.1 0.05 0.02 10-2 single shot δ= P tp T 10-3 t tp T 10 Fig 4. -4 10-6 10-5 10-4 10-3 10-2 10-1 1 tp (s) 10 Transient thermal impedance from junction to mounting base as a function of pulse duration PSMN1R2-25YL_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 25 June 2009 4 of 13 PSMN1R2-25YL NXP Semiconductors N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK 6. Characteristics Table 6. Symbol Characteristics Parameter Conditions Min Typ Max Unit Static characteristics V(BR)DSS VGS(th) IDSS IGSS RDSon RG drain-source breakdown voltage ID = 250 µA; VGS = 0 V; Tj = 25 °C 25 - - V ID = 250 µA; VGS = 0 V; Tj = -55 °C 22 - - V gate-source threshold voltage ID = 1 mA; VDS = VGS; Tj = 25 °C; see Figure 8; see Figure 9 1.3 1.7 2.15 V ID = 1 mA; VDS = VGS; Tj = 150 °C; see Figure 9 0.65 - - V ID = 1 mA; VDS = VGS; Tj = -55 °C; see Figure 9 - - 2.45 V VDS = 25 V; VGS = 0 V; Tj = 25 °C - - 1.5 µA VDS = 25 V; VGS = 0 V; Tj = 150 °C - - 500 µA VGS = 16 V; VDS = 0 V; Tj = 25 °C - - 100 nA VGS = -16 V; VDS = 0 V; Tj = 25 °C - - 100 nA VGS = 4.5 V; ID = 15 A; Tj = 25 °C; see Figure 10 - 1.2 1.85 mΩ VGS = 10 V; ID = 15 A; Tj = 100 °C; see Figure 11 - - 1.6 mΩ VGS = 10 V; ID = 15 A; Tj = 150 °C; see Figure 11 - - 2.1 mΩ VGS = 10 V; ID = 15 A; Tj = 25 °C; see Figure 10 - 0.9 1.2 mΩ f = 1 MHz - 0.94 - Ω ID = 25 A; VDS = 12 V; VGS = 10 V; see Figure 12; see Figure 13 - 105 - nC ID = 25 A; VDS = 12 V; VGS = 4.5 V; see Figure 12; see Figure 13 - 50.6 - nC ID = 25 A; VDS = 12 V; VGS = 4.5 V; see Figure 12; see Figure 13 - 19.3 - nC - 8.1 - nC drain leakage current gate leakage current drain-source on-state resistance gate resistance Dynamic characteristics QG(tot) total gate charge QGS gate-source charge QGS(th) pre-threshold gate-source charge QGS(th-pl) post-threshold gate-source charge - 4.5 - nC QGD gate-drain charge - 11.9 - nC VGS(pl) gate-source plateau voltage VDS = 12 V; see Figure 12 - 2.6 - V Ciss input capacitance - 6380 - pF Coss output capacitance VDS = 12 V; VGS = 0 V; f = 1 MHz; Tj = 25 °C; see Figure 14 - 1640 - pF Crss reverse transfer capacitance - 644 - pF PSMN1R2-25YL_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 25 June 2009 5 of 13 PSMN1R2-25YL NXP Semiconductors N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK Table 6. Characteristics …continued Symbol Parameter Conditions Min Typ Max Unit td(on) turn-on delay time - 69 - ns tr rise time VDS = 12 V; RL = 0.5 Ω; VGS = 4.5 V; RG(ext) = 5.6 Ω - 125 - ns td(off) turn-off delay time - 94 - ns tf fall time - 56 - ns Source-drain diode VSD source-drain voltage IS = 25 A; VGS = 0 V; Tj = 25 °C; see Figure 15 - 0.78 1.2 V trr reverse recovery time - 52 - ns Qr recovered charge IS = 20 A; dIS/dt = -100 A/µs; VGS = 0 V; VDS = 20 V - 66 - nC [1] Tested to JEDEC standards where applicable. 003aad128 100 ID (A) 003aad140 12 RDS(on) (mΩ) 10 80 8 60 6 40 Tj = 150 °C 25 °C 4 20 2 0 0 0 Fig 5. 1 2 3 VGS (V) 4 Transfer characteristics: drain current as a function of gate-source voltage; typical values 0 Fig 6. 10 15 VGS (V) 20 Drain-source on-state resistance as a function of gate-source voltage; typical values PSMN1R2-25YL_1 Product data sheet 5 © NXP B.V. 2009. All rights reserved. Rev. 01 — 25 June 2009 6 of 13 PSMN1R2-25YL NXP Semiconductors N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK 003aad131 120 10 ID (A) ID (A) 10-2 3.5 VGS (V) = 3 90 003aab271 10-1 2.8 min typ 1 2 max 10-3 60 10-4 2.6 30 10-5 2.4 2.2 10-6 0 0 Fig 7. 1 2 3 VDS (V) Output characteristics: drain current as a function of drain-source voltage; typical values 003a a c337 3 0 4 Fig 8. 3 Sub-threshold drain current as a function of gate-source voltage 003aad132 10 2.6 RDS(on) (mΩ) VGS (th) (V) VGS (V) 2.8 8 max 2 6 typ min 3 4 1 3.5 2 VGS (V) = 10 0 -60 Fig 9. 0 0 60 120 Tj (°C) 180 Gate-source threshold voltage as a function of junction temperature 0 40 60 80 ID (A) 100 Fig 10. Drain-source on-state resistance as a function of drain current; typical values PSMN1R2-25YL_1 Product data sheet 20 © NXP B.V. 2009. All rights reserved. Rev. 01 — 25 June 2009 7 of 13 PSMN1R2-25YL NXP Semiconductors N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK 03aa27 2 VDS a ID 1.5 VGS(pl) VGS(th) 1 VGS QGS1 0.5 QGS2 QGS QGD QG(tot) 003aaa508 0 −60 0 60 120 Tj (°C) 180 Fig 12. Gate charge waveform definitions Fig 11. Normalized drain-source on-state resistance factor as a function of junction temperature 003aad134 10 VGS (V) 003aad135 104 C (pF) 8 6 Ciss Coss VDS = 12V 103 4 Crss 2 0 0 40 80 QG (nC) 120 Fig 13. Gate-source voltage as a function of gate charge; typical values 102 10-1 10 VDS (V) 102 Fig 14. Input, output and reverse transfer capacitances as a function of drain-source voltage; typical values PSMN1R2-25YL_1 Product data sheet 1 © NXP B.V. 2009. All rights reserved. Rev. 01 — 25 June 2009 8 of 13 PSMN1R2-25YL NXP Semiconductors N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK 003aad133 100 IS (A) 80 60 Tj = 150 °C 40 25 °C 20 0 0 0.2 0.4 0.6 0.8 VSD (V) 1 Fig 15. Source (diode forward) current as a function of source-drain (diode forward) voltage; typical values PSMN1R2-25YL_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 25 June 2009 9 of 13 PSMN1R2-25YL NXP Semiconductors N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK 7. Package outline Plastic single-ended surface-mounted package (LFPAK2); 4 leads A E SOT1023 E1 A b1 b2 (3×) c1 mounting base D1 D H L 1 2 3 4 b e A1 X w A c C θ Lp detail X 0 2.5 mm 5 mm scale Dimensions Unit y C A A1 b b1 b2 c c1 D(1) D1(1) E(1) E1(1) max 1.10 0.15 0.50 4.41 0.25 0.30 4.70 4.45 5.30 0.85 nom min 0.95 0.00 0.35 3.62 0.19 0.24 4.45 4.95 e 3.7 H L Lp 6.2 1.3 0.85 1.27 3.5 5.9 0.8 w y 0.25 0.1 8° 0.40 Note 1. Plastic or metal protrusions of 0.15 mm per side are not included. Outline version JEDEC 0° sot1023_po References IEC θ JEITA European projection Issue date 08-10-13 09-05-26 SOT1023 Fig 16. Package outline SOT1023 PSMN1R2-25YL_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 25 June 2009 10 of 13 PSMN1R2-25YL NXP Semiconductors N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK 8. Revision history Table 7. Revision history Document ID Release date Data sheet status Change notice Supersedes PSMN1R2-25YL_1 20090625 Product data sheet - - PSMN1R2-25YL_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 25 June 2009 11 of 13 PSMN1R2-25YL NXP Semiconductors N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK 9. Legal information 9.1 Data sheet status Document status [1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term 'short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 9.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 9.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. 9.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. TrenchMOS — is a trademark of NXP B.V. 10. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] PSMN1R2-25YL_1 Product data sheet © NXP B.V. 2009. All rights reserved. Rev. 01 — 25 June 2009 12 of 13 PSMN1R2-25YL NXP Semiconductors N-channel 25 V 1.2 mΩ logic level MOSFET in LFPAK 11. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 9.1 9.2 9.3 9.4 10 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . .1 General description . . . . . . . . . . . . . . . . . . . . . .1 Features and benefits . . . . . . . . . . . . . . . . . . . . .1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Quick reference data . . . . . . . . . . . . . . . . . . . . .1 Pinning information . . . . . . . . . . . . . . . . . . . . . . .2 Ordering information . . . . . . . . . . . . . . . . . . . . . .2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . .3 Thermal characteristics . . . . . . . . . . . . . . . . . . .4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . .10 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 11 Legal information. . . . . . . . . . . . . . . . . . . . . . . .12 Data sheet status . . . . . . . . . . . . . . . . . . . . . . .12 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Contact information. . . . . . . . . . . . . . . . . . . . . .12 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2009. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 25 June 2009 Document identifier: PSMN1R2-25YL_1