DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D456 BGO827; BGO827/FC0; BGO827/SC0 870 MHz optical receivers Product specification Supersedes data of 2002 Jun 27 2002 Dec 10 Philips Semiconductors Product specification BGO827; BGO827/FC0; BGO827/SC0 870 MHz optical receivers FEATURES DESCRIPTION • Excellent linearity High dynamic range optical receiver amplifier modules in a standard SOT115 package where the non-jacketed fibre has either no connector or has an FC/APC or SC/APC connector. PIN The amplifier supply voltage pin and the photo diode bias voltage pin both connect to 24 V (DC). The modules have a monomode optical input suitable for 1290 to 1600 nm wavelengths, a terminal to monitor the photo diode current and an electrical output having a characteristic impedance of 75 Ω. • Low noise • Excellent flatness • Standard CATV outline • Rugged construction • Gold metallization ensures excellent reliability • High optical input power range. APPLICATIONS CATV optical node systems operating in the 40 to 870 MHz frequency range. PINNING DESCRIPTION 1 monitor current 2 common 3 common 4 +VB of the photo diode 5 +VB of the amplifier 7 common 8 common 9 output lfpage 1 2 3 Side view 4 5 7 8 1 9 2 3 4 5 7 8 1 9 3 4 5 7 8 9 Side view Side view MBK044 2 MBL041 MBL040 Fig.2 Fig.1 Simplified outline SOT115T (BGO827). Simplified outline SOT115X (BGO827/FC0). Fig.3 Simplified outline SOT115Y (BGO827/SC0). QUICK REFERENCE DATA SYMBOL PARAMETER f frequency range s22 output return losses CONDITIONS MIN. MAX. UNIT 40 870 MHz f = 40 to 870 MHz 11 − dB 45 − dB d2 second order distortion f = 854.5 MHz − −57 dB F equivalent noise input f = 40 to 870 MHz − 8.5 pA/√Hz Itot total current consumption (DC) VB = 24 V 175 205 mA optical input return losses CAUTION This product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport and handling. For further information, refer to Philips specs.: SNW-EQ-608, SNW-FQ-302A and SNW-FQ-302B. 2002 Dec 10 2 Philips Semiconductors Product specification BGO827; BGO827/FC0; BGO827/SC0 870 MHz optical receivers HANDLING Fibreglass optical coupling: maximum tensile strength = 5 N; minimum bending radius = 35 mm. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT f frequency range 40 870 MHz Tstg storage temperature −40 +85 °C Tmb operating mounting base temperature −20 +85 °C Pin optical input power continuous − 5 mW ESD ESD sensitivity human body model; R = 1.5 kΩ; C = 100 pF 500 − V CHARACTERISTICS Bandwidth 40 to 870 MHz; VB = 24 V; Tmb = 30 °C; ZL = 75 Ω. SYMBOL S PARAMETER responsivity CONDITIONS MIN. MAX. UNIT λ = 1300 nm BGO827 800 − V/W BGO827/FC0, BGO827/SC0 750 − V/W FL flatness straight line (peak to valley) f = 40 to 870 MHz − 1 dB SL slope straight line f = 40 to 870 MHz 0 2 dB s22 output return losses f = 40 to 870 MHz 11 − dB 45 − dB fm = 446.5 MHz; notes 1 and 3 − −68 dB fm = 746.5 MHz; notes 1 and 4 −63 dB fm = 854.5 MHz; notes 1 and 5 −57 dB optical input return losses d2 second order distortion d3 third order distortion fm = 853.25 MHz; notes 2 and 6 − −73 dB F equivalent noise input f = 40 to 450 MHz − 7 pA/√Hz f = 450 to 750 MHz − 8 pA/√Hz f = 750 to 870 MHz − 8.5 pA/√Hz λ = 1310 ±20 nm 0.85 − A/W sλ spectral sensitivity λ optical wavelength L length of optical fibre λ = 1550 ±20 nm 0.9 − A/W 1290 1600 nm 1 − m fibre; SM type; 9/125 µm BGO827 BGO827/FC0, BGO827/SC0 746 861 mm Itot total current consumption (DC) 175 205 mA Ibias diode bias current at pin 4 (DC) − 25 mA 2002 Dec 10 3 Philips Semiconductors Product specification BGO827; BGO827/FC0; BGO827/SC0 870 MHz optical receivers Notes 1. Two laser test; each laser with a modulation index of 40%; Popt = 1 mW (total). 2. Three laser test; each laser with a modulation index of 60%; Popt = 1 mW (total). 3. fm = 446.5 MHz; fp = 97.25 MHz; fq = 349.25 MHz. 4. fm = 746.5 MHz; fp = 133.25 MHz; fq = 613.25 MHz. 5. fm = 854.5 MHz; fp = 133.25 MHz; fq = 721.25 MHz. 6. fm = 853.25 MHz; fp = 133.25 MHz; fq = 265.25 MHz; fr = 721.25 MHz. handbook, halfpage Pin 1 10 kΩ photo current 1 kΩ MLB151 Fig.4 Monitor current pin. 2002 Dec 10 4 Philips Semiconductors Product specification BGO827; BGO827/FC0; BGO827/SC0 870 MHz optical receivers PACKAGE OUTLINES Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; optical input; 8 gold-plated in-line leads N D N1 N2 E S2 SOT115T Z p M M1 M2 A2 1 2 3 4 5 7 8 9 A S1 L F S W c e b w M e1 d U2 B q2 Q y M B q1 y M B y M B p U1 q 0 5 10 mm U1 U2 max. S2 16.7 4.95 44.75 16.1 4.55 scale optical input S1 8 W w 6-32 0.25 UNC y Z max. 0.1 12 q2 S DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. mm 20.8 9.1 OUTLINE VERSION b c D d E max. max. max. e e1 F 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 0.38 L min. M M1 N1 N2 N M2 min. max. max. 8.8 2.5 1.6 0.9 1000 10.7 REFERENCES IEC JEDEC EIAJ Q max. 4.15 3.85 2.4 EUROPEAN PROJECTION q q1 38.1 25.4 10.2 5 4.2 ISSUE DATE 99-04-13 01-08-10 SOT115T 2002 Dec 10 5 p Philips Semiconductors Product specification BGO827; BGO827/FC0; BGO827/SC0 870 MHz optical receivers Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; optical input with connector; 8 gold-plated in-line leads E SOT115X N1 N2 M M1 D S2 Z p M2 A2 1 2 3 4 5 7 8 9 A S1 L F S c W e b d U2 B w M e1 Q q2 y M B q1 y M B y M B p N R U1 q 0 25 mm Scale 0 5 10 mm connector S scale S1 S2 U1 U2 max. 4.2 16.7 4.95 44.75 16.1 4.55 N N1 N2 max. max. 8 DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. mm 20.8 9.1 OUTLINE VERSION b c D d E max. max. max. e e1 F 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 0.38 L min. M M1 M2 8.8 2.5 1.6 0.9 REFERENCES IEC JEDEC EIAJ 5 Q max. 4.15 3.85 2.4 EUROPEAN PROJECTION w 6-32 0.25 UNC q q1 y Z max. 0.1 12 q2 R min. 38.1 25.4 10.2 6 35 ISSUE DATE 00-01-06 01-08-10 SOT115X 2002 Dec 10 861 10.7 746 p W Philips Semiconductors Product specification BGO827; BGO827/FC0; BGO827/SC0 870 MHz optical receivers Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; optical input with connector; 8 gold-plated in-line leads E SOT115Y N1 N2 M M1 D S2 Z p M2 A2 1 2 3 4 5 7 8 9 A S1 L F S c W e b d U2 B w M e1 Q q2 y M B q1 y M B y M B p N R U1 q 0 25 mm Scale 0 5 10 mm connector S scale S1 S2 U1 U2 max. 4.2 16.7 4.95 44.75 16.1 4.55 N N2 N1 max. max. 8 DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. mm 20.8 9.1 OUTLINE VERSION b c D d E max. max. max. e e1 F 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 0.38 L min. M M1 M2 8.8 2.5 1.6 0.9 REFERENCES IEC JEDEC EIAJ 5 Q max. 4.15 3.85 2.4 EUROPEAN PROJECTION w 6-32 0.25 UNC q q1 y Z max. 0.1 12 q2 R min. 38.1 25.4 10.2 7 35 ISSUE DATE 00-01-06 01-08-10 SOT115Y 2002 Dec 10 861 10.7 746 p W Philips Semiconductors Product specification BGO827; BGO827/FC0; BGO827/SC0 870 MHz optical receivers DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Production This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2002 Dec 10 8 Philips Semiconductors Product specification BGO827; BGO827/FC0; BGO827/SC0 870 MHz optical receivers NOTES 2002 Dec 10 9 Philips Semiconductors Product specification BGO827; BGO827/FC0; BGO827/SC0 870 MHz optical receivers NOTES 2002 Dec 10 10 Philips Semiconductors Product specification BGO827; BGO827/FC0; BGO827/SC0 870 MHz optical receivers NOTES 2002 Dec 10 11 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: [email protected]. SCA74 © Koninklijke Philips Electronics N.V. 2002 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613518/02/pp12 Date of release: 2002 Dec 10 Document order number: 9397 750 10522