The HSDC‐JAKIT1W2/DB is an ADC/DAC loop back demo based on the ECP3 FPGA from Lattice Semiconductors. The kit consists of two high speed converter demos from NXP: DAC1408D650W2/DB and ADC1413D080W2/DB demos. The DAC1408D650W2/DB is a 14bit dual channel, 2x, 4x and 8x interpolating DAC demonstration board equipped with JESD204A interface and suitable for dynamic performance evaluation from low to high output frequency signals sampling up to 650Msps. This demo board features Lattice Semiconductors’ ECP3 FPGA and can be used for functional demonstration, as well as JESD204A interoperability testing and verification between the DAC1408D650 and the ECP3 FPGA. The ADC1413D080W2/DB is a 14bit dual channel ADC demonstration board equipped with on board Lattice ECP3-70 FPGA and JESD204A interface. This demonstration board enables one channel ADC dynamic performance evaluation for analog input frequencies up to 30 MHz and sample clock frequencies from 65Msps to 80Msps. Key Features for the DAC demo: • • • • • SW interface to easily program DAC parameters (NCO, Offset, interpolation factor, PLL…) and download waveforms to ECP3 FPGA SMA connector for DAC external clock input signal On board clock generator for DAC and FPGA On Board ECP3 FPGA enabling data generation: o Single/ multi Tone for SFDR evaluation o Test pattern generation for ACLR measurements ( 2/4 carriers WCDMA, TDSCDMA, GSM‐MC ... Etc ) USB Powered – no external supply required Key Features for the ADC demo: • • • • USB-powered demonstration board 60 MHz on Board Oscillator for ADC sample clock Optional external ADC sample clock ( via SMA connector ) 65MHz to 80MHz Access to one ADC channel Demo box content: • • • Demo Kit USB cables CDROM (LabVIEW user software, datasheets, PCB layout/schematics, drivers, Quick Start Guide) ADC1413D080W2/DB is a 14bit dual channel ADC demonstration board equipped with on Board Lattice ECP3-70 FPGA and JESD204A interface. This demonstration board enables one channel ADC dynamic performance evaluation for analog input up to 30 MHz Key Features: • • • • USB-powered demonstration board 66.66 MHz on Board Oscillator for ADC sample clock Optional external ADC sample clock ( via SMA connector ) Access to one ADC channel Demo box Content: • • USB cable, power supply adaptor CDROM (SPI software, datasheets, PCB layout/schematics, drivers, Quick Start Guide) Optional Accessories: • Any DAC demonstration board for analog input frequency generation The DAC1408D650W2/DB is a 14bit dual channel, 2x, 4x and 8x interpolating DAC demonstration board equipped with JESD204A interface and suitable for dynamic performance evaluation from low to high output frequency signals sampling up to 650Msps. This demo board features Lattice Semiconductors’ ECP3 FPGA and can be used for functional demonstration, as well as JESD204A interoperability testing and verification between the DAC1408D650 and the ECP3 FPGA. Key Features: • SW interface to easily program DAC parameters (NCO, Offset, interpolation factor, PLL…) and download waveforms to ECP3 FPGA • SMA connector for DAC external clock input signal • On board clock generator for DAC and FPGA • On Board ECP3 FPGA enabling data generation: o Single/ multi Tone for SFDR evaluation o Test pattern generation for ACLR measurements ( 2/4 carriers WCDMA, TDSCDMA, GSM‐MC ... Etc ) • USB Powered – no external supply required Demo box content: • • USB cable CDROM (LabVIEW user software, datasheets, PCB layout/schematics, drivers, Quick Start Guide)