PHILIPS 74HCT259BQ

74HC259; 74HCT259
8-bit addressable latch
Rev. 5 — 7 August 2012
Product data sheet
1. General description
The 74HC259; 74HCT259 are high-speed Si-gate CMOS devices and are pin compatible
with Low-power Schottky TTL (LSTTL). They are specified in compliance with JEDEC
standard No. 7-A.
The 74HC259; 74HCT259 are high-speed 8-bit addressable latches designed for
general-purpose storage applications in digital systems. They are multifunctional devices
capable of storing single-line data in eight addressable latches. They provide a 3-to-8
decoder and multiplexer function with active HIGH outputs (Q0 to Q7). They also
incorporate an active LOW common reset (MR) for resetting all latches as well as an
active LOW enable input (LE).
The 74HC259; 74HCT259 has four modes of operation:
• Addressable latch mode, in this mode data on the data line (D) is written into the
addressed latch. The addressed latch follows the data input with all non-addressed
latches remaining in their previous states.
• Memory mode, in this mode all latches remain in their previous states and are
unaffected by the data or address inputs.
• Demultiplexing mode (or 3-to-8 decoding), in this mode the addressed output follows
the state of the data input (D) with all other outputs in the LOW state.
• Reset mode, in this mode all outputs are LOW and unaffected by the address inputs
(A0 to A2) and data input (D).
When operating the 74HC259; 74HCT259 as an address latch, changing more than one
address bit could impose a transient wrong address. Therefore, this should only be done
while in the Memory mode.
2. Features and benefits








Combined demultiplexer and 8-bit latch
Serial-to-parallel capability
Output from each storage bit available
Random (addressable) data entry
Easily expandable
Common reset input
Useful as a 3-to-8 active HIGH decoder
Input levels:
 For 74HC259: CMOS level
 For 74HCT259: TTL level
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
 ESD protection:
 HBM JESD22-A114F exceeds 2000 V
 MM JESD22-A115-A exceeds 200 V
 CDM JESD22E exceeds 1000 V
 Multiple package options
 Specified from 40 C to +85 C and from 40 C to +125 C
3. Ordering information
Table 1.
Ordering information
Type number
74HC259N
Package
Temperature range Name
Description
Version
40 C to +125 C
DIP16
plastic dual in-line package; 16 leads (300 mil)
SOT38-4
40 C to +125 C
SO16
plastic small outline package; 16 leads;
body width 3.9 mm
SOT109-1
40 C to +125 C
SSOP16
plastic shrink small outline package; 16 leads; body
width 5.3 mm
SOT338-1
40 C to +125 C
TSSOP16
plastic thin shrink small outline package; 16 leads;
body width 4.4 mm
SOT403-1
40 C to +125 C
DHVQFN16
plastic dual in-line compatible thermal enhanced very SOT763-1
thin quad flat package; no leads; 16 terminals;
body 2.5  3.5  0.85 mm
74HCT259N
74HC259D
74HCT259D
74HC259DB
74HCT259DB
74HC259PW
74HCT259PW
74HC259BQ
74HCT259BQ
4. Functional diagram
13
Z9
15
G8
14
G10
9,10D
DX
14
0
1
LE
Q0
13
D
Q1
Q2
Q3
1
2
3
A0
Q4
A1
Q5
A2
Q6
Q7
4
2
5
3
Fig 1.
Logic symbol
74HC_HCT259
Product data sheet
C10
8R
0
G
0
7
2
6
4
5
1
6
2
7
7
3
9
9
4
10
10
5
11
11
12
6
12
MR
15
1
7
mna573
mna572
Fig 2.
IEC logic symbol
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
2 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
1
A0
2
A1
3
A2
1-of-8
DECODER
8 LATCHES
Q0
4
Q1
5
Q2
6
Q3
7
Q4
9
14
LE
Q5 10
15
MR
Q6 11
13
D
Q7 12
mna571
Fig 3.
Functional diagram
5. Pinning information
5.1 Pinning
1
15 MR
3
14 LE
13 D
2
15 MR
Q0
A2
3
14 LE
Q1
5
Q0
4
13 D
Q2
6
Q1
5
12 Q7
Q3
7
Q2
6
11 Q6
Q3
7
10 Q5
GND
8
9
Q4
12 Q7
GND(1)
11 Q6
10 Q5
9
A1
4
Q4
16 VCC
2
A2
8
1
A1
GND
A0
A0
terminal 1
index area
74HC259
74HCT259
16 VCC
74HC259
74HCT259
001aaj445
Transparent top view
001aaj444
(1) The die substrate is attached to this pad using
conductive die attach material. It cannot be used as
supply pin or input.
Fig 4.
Pin configuration (DIP16, SO16, SSOP16 and
TSSOP16)
74HC_HCT259
Product data sheet
Fig 5.
Pin configuration (DHVQFN16)
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
3 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
5.2 Pin description
Table 2.
Pin description
Symbol
Pin
Description
A0, A1, A2
1, 2, 3
address input
Q0, Q1, Q2, Q3, Q4, Q5, Q6, Q7
4, 5, 6, 7, 9, 10, 11, 12 latch output
GND
8
ground (0 V)
D
13
data input
LE
14
latch enable input (active LOW)
MR
15
conditional reset input (active LOW)
VCC
16
supply voltage
6. Functional description
Table 3.
Function table[1]
Operating mode
Input
Output
MR
LE
D
A0
A1
A2
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
L
H
X
X
X
X
L
L
L
L
L
L
L
L
Demultiplexer
L
(active HIGH 8-channel) L
decoder (when D = H)
L
L
d
L
L
L
Q=d L
L
L
L
L
L
L
L
d
H
L
L
L
Q=d L
L
L
L
L
L
L
d
L
H
L
L
L
Q=d L
L
L
L
L
L
L
d
H
H
L
L
L
L
Q=d L
L
L
L
L
L
d
L
L
H
L
L
L
L
Q=d L
L
L
L
L
d
H
L
H
L
L
L
L
L
Q=d L
L
L
L
d
L
H
H
L
L
L
L
L
L
Q=d L
L
L
d
H
H
H
L
L
L
L
L
L
L
Q=d
Memory (no action)
H
H
X
X
X
X
q0
q1
q2
q3
q4
q5
q6
q7
Addressable latch
H
L
d
L
L
L
Q = d q1
q2
q3
q4
q5
q6
q7
H
L
d
H
L
L
q0
Q = d q2
q3
q4
q5
q6
q7
H
L
d
L
H
L
q0
q1
Q = d q3
q4
q5
q6
q7
H
L
d
H
H
L
q0
q1
q2
Q = d q4
q5
q6
q7
H
L
d
L
L
H
q0
q1
q2
q3
Q = d q5
q6
q7
H
L
d
H
L
H
q0
q1
q2
q3
q4
Q = d q6
q7
H
L
d
L
H
H
q0
q1
q2
q3
q4
q5
Q = d q7
H
L
d
H
H
H
q0
q1
q2
q3
q4
q5
q6
Reset (clear)
[1]
Q=d
H = HIGH voltage level;
L = LOW voltage level;
X = don’t care;
d = HIGH or LOW data one set-up time prior to the LOW-to-HIGH LE transition;
q = lower case letter indicates the state of the referenced input one set-up time prior to the LOW-to-HIGH transition.
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
4 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
Table 4.
Operating mode select table[1]
LE
MR
Mode
L
H
Addressable latch mode
H
H
Memory mode
L
L
Demultiplexer mode
H
L
Reset mode
[1]
H = HIGH voltage level; L = LOW voltage level.
7. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
VCC
supply voltage
IIK
input clamping current
VI < 0.5 V or VI > VCC + 0.5 V
[1]
IOK
output clamping current
VO < 0.5 V or VO > VCC + 0.5 V
[1]
IO
output current
VO = 0.5 V to VCC + 0.5 V
Min
Max
Unit
0.5
+7.0
V
-
20
mA
-
20
mA
-
25
mA
ICC
supply current
-
+70
mA
IGND
ground current
70
-
mA
Tstg
storage temperature
65
+150
C
Ptot
total power dissipation
Tamb = 40 C to +125 C
DIP16 package
[2]
-
750
mW
SO16 package
[3]
-
500
mW
(T)SSOP16 package
[4]
-
500
mW
DHVQFN16 package
[5]
-
500
mW
[1]
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2]
Ptot derates linearly with 12 mW/K above 70 C.
[3]
Ptot derates linearly with 8 mW/K above 70 C.
[4]
Ptot derates linearly with 5.5 mW/K above 60 C.
[5]
Ptot derates linearly with 4.5 mW/K above 60 C.
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
5 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
8. Recommended operating conditions
Table 6.
Recommended operating conditions
Voltages are referenced to GND (ground = 0 V)
Symbol Parameter
Conditions
74HC259
Min
74HCT259
Typ
Max
Min
Unit
Typ
Max
VCC
supply voltage
2.0
5.0
6.0
4.5
5.0
5.5
V
VI
input voltage
0
-
VCC
0
-
VCC
V
VO
output voltage
0
-
VCC
0
-
VCC
V
Tamb
ambient temperature
40
-
+125
40
-
+125
C
t/V
input transition rise and fall rate
VCC = 2.0 V
-
-
625
-
-
-
ns/V
VCC = 4.5 V
-
1.67
139
-
1.67
139
ns/V
VCC = 6.0 V
-
-
83
-
-
-
ns/V
9. Static characteristics
Table 7.
Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
25 C
Conditions
40 C to +85 C 40 C to +125 C Unit
Min
Typ
Max
Min
Max
Min
Max
VCC = 2.0 V
1.5
1.2
-
1.5
-
1.5
-
V
VCC = 4.5 V
3.15
2.4
-
3.15
-
3.15
-
V
VCC = 6.0 V
4.2
3.2
-
4.2
-
4.2
-
V
VCC = 2.0 V
-
0.8
0.5
-
0.5
-
0.5
V
VCC = 4.5 V
-
2.1
1.35
-
1.35
-
1.35
V
VCC = 6.0 V
-
2.8
1.8
-
1.8
-
1.8
V
IO = 20 A; VCC = 2.0 V
1.9
2.0
-
1.9
-
1.9
-
V
IO = 20 A; VCC = 4.5 V
4.4
4.5
-
4.4
-
4.4
-
V
IO = 20 A; VCC = 6.0 V
5.9
6.0
-
5.9
-
5.9
-
V
IO = 4.0 mA; VCC = 4.5 V
3.98
4.32
-
3.84
-
3.7
-
V
IO = 5.2 mA; VCC = 6.0 V
5.48
5.81
-
5.34
-
5.2
-
V
IO = 20 A; VCC = 2.0 V
-
0
0.1
-
0.1
-
0.1
V
IO = 20 A; VCC = 4.5 V
-
0
0.1
-
0.1
-
0.1
V
IO = 20 A; VCC = 6.0 V
-
0
0.1
-
0.1
-
0.1
V
IO = 4.0 mA; VCC = 4.5 V
-
0.15
0.26
-
0.33
-
0.4
V
IO = 5.2 mA; VCC = 6.0 V
-
0.16
0.26
-
0.33
-
0.4
V
74HC259
VIH
VIL
VOH
VOL
HIGH-level
input voltage
LOW-level
input voltage
HIGH-level
output voltage
LOW-level
output voltage
VI = VIH or VIL
VI = VIH or VIL
II
input leakage
current
VI = VCC or GND;
VCC = 6.0 V
-
-
0.1
-
1
-
1
A
ICC
supply current
VI = VCC or GND; IO = 0 A;
VCC = 6.0 V
-
-
8.0
-
80
-
160
A
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
6 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
Table 7.
Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
CI
25 C
Conditions
input
capacitance
40 C to +85 C 40 C to +125 C Unit
Min
Typ
Max
Min
Max
Min
Max
-
3.5
-
-
-
-
-
pF
74HCT259
VIH
HIGH-level
input voltage
VCC = 4.5 V to 5.5 V
2.0
1.6
-
2.0
-
2.0
-
V
VIL
LOW-level
input voltage
VCC = 4.5 V to 5.5 V
-
1.2
0.8
-
0.8
-
0.8
V
VOH
HIGH-level
output voltage
VI = VIH or VIL; VCC = 4.5 V
IO = 20 A
4.4
4.5
-
4.4
-
4.4
-
V
IO = 4.0 mA
3.98
4.32
-
3.84
-
3.7
-
V
LOW-level
output voltage
VI = VIH or VIL; VCC = 4.5 V
IO = 20 A; VCC = 4.5 V
-
0
0.1
-
0.1
-
0.1
V
IO = 5.2 mA; VCC = 6.0 V
-
0.15
0.26
-
0.33
-
0.4
V
VOL
II
input leakage
current
VI = VCC or GND;
VCC = 5.5 V
-
-
0.1
-
1
-
1
A
ICC
supply current
VI = VCC or GND; IO = 0 A;
VCC = 5.5 V
-
-
8.0
-
80
-
160
A
ICC
additional
supply current
VI = VCC  2.1 V; IO = 0 A;
other inputs at VCC or GND;
VCC = 4.5 V to 5.5 V
pin An, LE
-
150
540
-
675
-
735
A
pin D
-
120
432
-
540
-
588
A
pin MR
-
75
270
-
338
-
368
A
-
3.5
-
-
-
-
-
pF
CI
input
capacitance
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
7 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
10. Dynamic characteristics
Table 8.
Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 12.
Symbol Parameter
25 C
Conditions
40 C to +85 C 40 C to +125 C Unit
Min
Typ[1]
Max
Min
Max
Min
Max
VCC = 2.0 V
-
58
185
-
230
-
280
ns
VCC = 4.5 V
-
21
37
-
46
-
56
ns
VCC = 5.0 V; CL = 15 pF
-
18
-
-
-
-
-
ns
VCC = 6.0 V
-
17
31
-
39
-
48
ns
-
58
185
-
230
-
280
ns
74HC259
tpd
propagation
delay
[2]
D to Qn; see Figure 6
[2]
An to Qn; see Figure 7
VCC = 2.0 V
VCC = 4.5 V
-
21
37
-
46
-
56
ns
VCC = 5.0 V; CL = 15 pF
-
17
-
-
-
-
-
ns
-
17
31
-
39
-
48
ns
VCC = 2.0 V
-
55
170
-
215
-
255
ns
VCC = 4.5 V
-
20
34
-
43
-
51
ns
VCC = 5.0 V; CL = 15 pF
-
17
-
-
-
-
-
ns
VCC = 6.0 V
-
16
29
-
37
-
43
ns
VCC = 2.0 V
-
50
155
-
195
-
235
ns
VCC = 4.5 V
-
18
31
-
39
-
47
ns
VCC = 5.0 V; CL = 15 pF
-
15
-
-
-
-
-
ns
-
14
26
-
33
-
40
ns
VCC = 2.0 V
-
19
75
-
95
-
119
ns
VCC = 4.5 V
-
7
15
-
19
-
22
ns
VCC = 6.0 V
-
6
13
-
16
-
19
ns
VCC = 2.0 V
70
17
-
90
-
105
-
ns
VCC = 4.5 V
14
6
-
18
-
21
-
ns
VCC = 6.0 V
12
5
-
15
-
18
-
ns
VCC = 2.0 V
70
17
-
90
-
105
-
ns
VCC = 4.5 V
14
6
-
18
-
21
-
ns
VCC = 6.0 V
12
5
-
15
-
18
-
ns
VCC = 6.0 V
[2]
LE to Qn; see Figure 8
tPHL
HIGH to LOW
propagation
delay
MR to Qn; see Figure 9
VCC = 6.0 V
tt
tW
transition time
pulse width
[3]
see Figure 8
LE HIGH or LOW;
see Figure 8
MR LOW; see Figure 9
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
8 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
Table 8.
Dynamic characteristics …continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 12.
Symbol Parameter
tsu
th
set-up time
hold time
25 C
Conditions
40 C to +85 C 40 C to +125 C Unit
Min
Typ[1]
Max
Min
Max
Min
Max
VCC = 2.0 V
80
19
-
100
-
120
-
ns
VCC = 4.5 V
16
7
-
20
-
24
-
ns
VCC = 6.0 V
14
6
-
17
-
20
-
ns
VCC = 2.0 V
0
19
-
0
-
0
-
ns
VCC = 4.5 V
0
6
-
0
-
0
-
ns
VCC = 6.0 V
0
5
-
0
-
0
-
ns
VCC = 2.0 V
2
11
-
2
-
2
-
ns
VCC = 4.5 V
2
4
-
2
-
2
-
ns
2
3
-
2
-
2
-
ns
-
19
-
-
-
-
-
pF
D, An to LE;
see Figure 10 and
Figure 11
D to LE; see Figure 10
and Figure 11
An to LE; see Figure 10
and Figure 11
VCC = 6.0 V
CPD
power
dissipation
capacitance
fi = 1 MHz;
VI = GND to VCC
[4]
D to Qn; see Figure 6
[2]
74HCT259
tpd
propagation
delay
VCC = 4.5 V
-
23
39
-
49
-
59
ns
VCC = 5.0 V; CL = 15 pF
-
20
-
-
-
-
-
ns
-
25
41
62
ns
-
20
-
-
-
-
-
ns
VCC = 4.5 V
-
22
38
-
48
-
57
ns
VCC = 5.0 V; CL = 15 pF
-
20
-
-
-
-
-
ns
-
23
39
-
49
-
59
ns
-
20
-
-
-
-
-
ns
-
7
15
-
19
-
22
ns
19
11
-
24
-
29
-
ns
18
10
-
23
-
27
-
ns
[2]
An to Qn; see Figure 7
VCC = 4.5 V
VCC = 5.0 V; CL = 15 pF
[2]
LE to Qn; see Figure 8
tPHL
HIGH to LOW
propagation
delay
51
MR to Qn; see Figure 9
VCC = 4.5 V
VCC = 5.0 V; CL = 15 pF
[3]
tt
transition time
see Figure 8
tW
pulse width
LE HIGH or LOW;
see Figure 8
VCC = 4.5 V
VCC = 4.5 V
MR LOW; see Figure 9
VCC = 4.5 V
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
9 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
Table 8.
Dynamic characteristics …continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 12.
Symbol Parameter
tsu
set-up time
25 C
Conditions
Min
Max
Min
Max
Min
Max
17
10
-
21
-
26
-
ns
0
8
-
0
-
0
-
ns
0
4
-
0
-
0
-
ns
-
19
-
-
-
-
-
pF
D, An to LE;
see Figure 10 and
Figure 11
VCC = 4.5 V
hold time
th
40 C to +85 C 40 C to +125 C Unit
Typ[1]
D to LE; see Figure 10
and Figure 11
VCC = 4.5 V
An to LE; see Figure 10
and Figure 11
VCC = 4.5 V
power
dissipation
capacitance
CPD
[1]
fi = 1 MHz;
VI = GND to VCC  1.5 V
[4]
Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V).
[2]
tpd is the same as tPLH and tPHL.
[3]
tt is the same as tTHL and tTLH.
[4]
CPD is used to determine the dynamic power dissipation (PD in W).
PD = CPD  VCC2  fi  N + (CL  VCC2  fo) where:
fi = input frequency in MHz;
fo = output frequency in MHz;
CL = output load capacitance in pF;
VCC = supply voltage in V;
N = number of inputs switching;
(CL  VCC2  fo) = sum of the outputs.
11. Waveforms
VCC
D input
VM
GND
tPHL
tPLH
VOH
VM
Qn output
VOL
001aah123
Measurement points are given in Table 9.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 6.
Data input to output propagation delays
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
10 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
VCC
VM
An input
GND
tPLH
tPHL
VOH
VM
Qn output
VOL
001aah122
Measurement points are given in Table 9.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 7.
Address input to output propagation delays
VCC
D input
GND
VCC
VM
LE input
GND
tW
tPHL
VOH
tPLH
VY
VM
Qn output
VX
VOL
tTHL
tTLH
001aaj446
Measurement points are given in Table 9.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 8.
Enable input to output propagation delays and pulse width
VCC
MR input
VM
GND
tW
tPHL
VOH
VM
Qn output
VOL
001aah124
Measurement points are given in Table 9.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 9.
Master reset input to output propagation delays
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
11 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
VCC
LE input
VM
GND
tsu
tsu
th
VCC
th
VM
D input
GND
VOH
Qn output
VM
Q=D
Q=D
VOL
001aah125
Measurement points are given in Table 9.
The shaded areas indicate when the input is permitted to change for predictable output performance.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 10. Data input to latch enable input set-up and hold times
VCC
An input
VM
ADDRESS STABLE
GND
tsu
th
VCC
LE input
VM
GND
001aah126
Measurement points are given in Table 9.
The shaded areas indicate when the input is permitted to change for predictable output performance.
VOL and VOH are typical voltage output levels that occur with the output load.
Fig 11. Address input to latch enable input set-up and hold times
Table 9.
Measurement points
Type
Input
Output
VM
VM
VX
VY
74HC259
0.5VCC
0.5VCC
0.1VCC
0.9VCC
74HCT259
1.3 V
1.3 V
0.1VCC
0.9VCC
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
12 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
VI
tW
90 %
negative
pulse
VM
0V
tf
tr
tr
tf
VI
90 %
positive
pulse
0V
VM
10 %
VM
VM
10 %
tW
VCC
VCC
G
VI
VO
RL
S1
open
DUT
CL
RT
001aad983
Test data is given in Table 10.
Definitions test circuit:
RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
CL = Load capacitance including jig and probe capacitance.
RL = Load resistance.
S1 = Test selection switch
Fig 12. Load circuit for measuring switching times
Table 10.
Test data
Type
Input
VI
tr, tf
CL
RL
tPHL, tPLH
74HC259
VCC
6 ns
15 pF, 50 pF
1 k
open
74HCT259
3V
6 ns
15 pF, 50 pF
1 k
open
74HC_HCT259
Product data sheet
Load
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
S1 position
© NXP B.V. 2012. All rights reserved.
13 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
12. Package outline
DIP16: plastic dual in-line package; 16 leads (300 mil)
SOT38-4
ME
seating plane
D
A2
A
A1
L
c
e
Z
w M
b1
(e 1)
b
b2
MH
9
16
pin 1 index
E
1
8
0
5
10 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
UNIT
A
max.
A1
min.
A2
max.
b
b1
b2
c
D (1)
E (1)
e
e1
L
ME
MH
w
Z (1)
max.
mm
4.2
0.51
3.2
1.73
1.30
0.53
0.38
1.25
0.85
0.36
0.23
19.50
18.55
6.48
6.20
2.54
7.62
3.60
3.05
8.25
7.80
10.0
8.3
0.254
0.76
inches
0.17
0.02
0.13
0.068
0.051
0.021
0.015
0.049
0.033
0.014
0.009
0.77
0.73
0.26
0.24
0.1
0.3
0.14
0.12
0.32
0.31
0.39
0.33
0.01
0.03
Note
1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included.
OUTLINE
VERSION
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
95-01-14
03-02-13
SOT38-4
Fig 13. Package outline SOT38-4 (DIP16)
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
14 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
SO16: plastic small outline package; 16 leads; body width 3.9 mm
SOT109-1
D
E
A
X
c
y
HE
v M A
Z
16
9
Q
A2
A
(A 3)
A1
pin 1 index
θ
Lp
1
L
8
e
0
detail X
w M
bp
2.5
5 mm
scale
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (1)
e
HE
L
Lp
Q
v
w
y
Z (1)
mm
1.75
0.25
0.10
1.45
1.25
0.25
0.49
0.36
0.25
0.19
10.0
9.8
4.0
3.8
1.27
6.2
5.8
1.05
1.0
0.4
0.7
0.6
0.25
0.25
0.1
0.7
0.3
0.01
0.019 0.0100 0.39
0.014 0.0075 0.38
0.039
0.016
0.028
0.020
inches
0.010 0.057
0.069
0.004 0.049
0.16
0.15
0.05
0.244
0.041
0.228
0.01
0.01
0.028
0.004
0.012
θ
8o
o
0
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
REFERENCES
OUTLINE
VERSION
IEC
JEDEC
SOT109-1
076E07
MS-012
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-19
Fig 14. Package outline SOT109-1 (SO16)
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
15 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm
D
SOT338-1
E
A
X
c
y
HE
v M A
Z
9
16
Q
A2
A
(A 3)
A1
pin 1 index
θ
Lp
L
8
1
detail X
w M
bp
e
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (1)
e
HE
L
Lp
Q
v
w
y
Z (1)
θ
mm
2
0.21
0.05
1.80
1.65
0.25
0.38
0.25
0.20
0.09
6.4
6.0
5.4
5.2
0.65
7.9
7.6
1.25
1.03
0.63
0.9
0.7
0.2
0.13
0.1
1.00
0.55
8o
o
0
Note
1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
OUTLINE
VERSION
SOT338-1
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-19
MO-150
Fig 15. Package outline SOT338-1 (SSOP16)
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
16 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm
SOT403-1
E
D
A
X
c
y
HE
v M A
Z
9
16
Q
(A 3)
A2
A
A1
pin 1 index
θ
Lp
L
1
8
e
detail X
w M
bp
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
max.
A1
A2
A3
bp
c
D (1)
E (2)
e
HE
L
Lp
Q
v
w
y
Z (1)
θ
mm
1.1
0.15
0.05
0.95
0.80
0.25
0.30
0.19
0.2
0.1
5.1
4.9
4.5
4.3
0.65
6.6
6.2
1
0.75
0.50
0.4
0.3
0.2
0.13
0.1
0.40
0.06
8o
o
0
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
OUTLINE
VERSION
SOT403-1
REFERENCES
IEC
JEDEC
JEITA
EUROPEAN
PROJECTION
ISSUE DATE
99-12-27
03-02-18
MO-153
Fig 16. Package outline SOT403-1 (TSSOP16)
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
17 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
DHVQFN16: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;
SOT763-1
16 terminals; body 2.5 x 3.5 x 0.85 mm
A
B
D
A
A1
E
c
detail X
terminal 1
index area
terminal 1
index area
C
e1
e
2
7
y
y1 C
v M C A B
w M C
b
L
1
8
Eh
e
16
9
15
10
Dh
X
0
2.5
5 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A(1)
max.
A1
b
c
D (1)
Dh
E (1)
Eh
e
e1
L
v
w
y
y1
mm
1
0.05
0.00
0.30
0.18
0.2
3.6
3.4
2.15
1.85
2.6
2.4
1.15
0.85
0.5
2.5
0.5
0.3
0.1
0.05
0.05
0.1
Note
1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
REFERENCES
OUTLINE
VERSION
IEC
JEDEC
JEITA
SOT763-1
---
MO-241
---
EUROPEAN
PROJECTION
ISSUE DATE
02-10-17
03-01-27
Fig 17. Package outline SOT763-1 (DHVQFN16)
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
18 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
13. Abbreviations
Table 11.
Abbreviations
Acronym
Description
CDM
Charged Device Model
CMOS
Complementary Metal-Oxide Semiconductor
DUT
Device Under Test
ESD
ElectroStatic Discharge
HBM
Human Body Model
LSTTL
Low-power Schottky Transistor-Transistor Logic
MM
Machine Model
TTL
Transistor-Transistor Logic
14. Revision history
Table 12.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
74HC_HCT259 v.5
20120807
Product data sheet
-
74HC_HCT259 v.4
Modifications:
74HC_HCT259 v.4
Modifications:
74HC_HCT259 v.3
•
The format of this data sheet has been redesigned to comply with the new identity guidelines
of NXP Semiconductors.
•
Legal texts have been adapted to the new company name where appropriate.
20090225
•
•
Product data sheet
-
74HC_HCT259 v.3
Added type number 74HC259N and 74HCT259N (DIP16 package)
Added type number 74HC259DB and 74HCT259DB (SSOP16 package)
20090108
74HC_HCT259_CNV v.2 19970828
74HC_HCT259
Product data sheet
Product data sheet
-
74HC_HCT259_CNV v.2
Product specification
-
-
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
19 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
15. Legal information
15.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
15.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
15.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information. NXP Semiconductors takes no
responsibility for the content in this document if provided by an information
source outside of NXP Semiconductors.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
74HC_HCT259
Product data sheet
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors and its suppliers accept no liability for
inclusion and/or use of NXP Semiconductors products in such equipment or
applications and therefore such inclusion and/or use is at the customer’s own
risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
20 of 22
74HC259; 74HCT259
NXP Semiconductors
8-bit addressable latch
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from competent authorities.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
Translations — A non-English (translated) version of a document is for
reference only. The English version shall prevail in case of any discrepancy
between the translated and English versions.
15.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
16. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
74HC_HCT259
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 7 August 2012
© NXP B.V. 2012. All rights reserved.
21 of 22
NXP Semiconductors
74HC259; 74HCT259
8-bit addressable latch
17. Contents
1
2
3
4
5
5.1
5.2
6
7
8
9
10
11
12
13
14
15
15.1
15.2
15.3
15.4
16
17
General description . . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2
Pinning information . . . . . . . . . . . . . . . . . . . . . . 3
Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4
Functional description . . . . . . . . . . . . . . . . . . . 4
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5
Recommended operating conditions. . . . . . . . 6
Static characteristics. . . . . . . . . . . . . . . . . . . . . 6
Dynamic characteristics . . . . . . . . . . . . . . . . . . 8
Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package outline . . . . . . . . . . . . . . . . . . . . . . . . 14
Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Revision history . . . . . . . . . . . . . . . . . . . . . . . . 19
Legal information. . . . . . . . . . . . . . . . . . . . . . . 20
Data sheet status . . . . . . . . . . . . . . . . . . . . . . 20
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Contact information. . . . . . . . . . . . . . . . . . . . . 21
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2012.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 7 August 2012
Document identifier: 74HC_HCT259
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
NXP:
74HC259D,652 74HC259DB,112 74HC259DB,118 74HC259D,653 74HC259N,652 74HC259PW,112
74HC259PW,118 74HCT259D,652 74HCT259DB,112 74HCT259DB,118 74HCT259D,653 74HCT259N,652
74HCT259PW,112 74HCT259PW,118 74HC259BQ,115 74HCT259BQ,115