XO5060 Series OCXO Features Standard DIP/DIL Package Tight Stabilities Fast Warm-up Low Current Typical Specifications Model XO5060 XO5160 XO5061 XO5062 XO5063 XO5064 XO5065 Options Frequency (MHz) 10.000 12.000 13.000 16.384 12.688281 10.150685 Additional Specifications Warm-up current Current Warm-up time Control voltage Aging adjustment Slope Frequency stability Vs supply voltage Vs load variation Short term (-tau = 1s) Temperature Range (°C) -40 to +60 -40 to +60 -40 to +60 -40 to +60 -40 to +60 -40 to +60 Temperature Stability ±2.0 x 10-7 ±2.0 x 10-7 ±2.0 x 10-7 ±2.0 x 10-7 ±2.0 x 10-7 ±2.0 x 10-7 Consult Factory Aging Yearly ±5.0 x 10-7 ±5.0 x 10-7 ±5.0 x 10-7 ±5.0 x 10-7 ±5.0 x 10-7 ±5.0 x 10-7 Output Supply Voltage 5 V ±5% 5 V ±5% 5 V ±5% 5 V ±5% 5 V ±5% 5 V ±5% Clipped Sine Clipped Sine Clipped Sine Clipped Sine Clipped Sine Clipped Sine HCMOS 250 mA max 65 mA typical @ -40 °C steady state 25 mA typical @ +25 °C steady state 10 mA typical @ +60 °C steady state 60 sec @ -40 °C 0.5 V to 5 V ±7.0 x 10-7 (Ref to nominal freq) Positive ±1.0 x 10-7 ±1.0 x 10-7 ±5.0 x 10-11 Phase Noise @ 10MHz 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz -75 dBc/Hz -105 dBc/Hz -135 dBc/Hz -145 dBc/Hz -150 dBc/Hz Sinewave Version Load Output level 10 k Ω//10 pF 1.5 Vpp typical HCMOS Version Duty cycle Load 40/60 2 Gates RF out Osc (+) 14 8 1 CL R L ± 7 Osc (-) .815 (20.70) MAX .600 (15.24) CENT. .48 (12.19) CENT. .325 (8.26) MAX .25 (6.35) TYP. C L 8 14 Dimensions are in inches (mm) Pin connections 1. 7. 8. 14. Frequency adjust Case ground & supply return R.F. Output Supply (+) .18 (4.60) CENT. .515 (13.08) MAX C L Pin numbers shown for ref. only. Numbers are not marked on unit. .300 (7.62) CENT. 7 .03 (.76) TYP. .018 (.45) DIA TYP. 1 .060 (1.52) DIA STANDOFF, TYP. Specifications are subject to change without notice. Visit our web site at http: //www.piezotech.com 2525 Shader Road, FL 32804 PH: (407) 298-2000 / FAX: (407) 293-2979 8 CRYSTAL OSCILLATORS Applications PCS Base Stations Cellular Base Stations Compact Design Phase Locking SAR/SAT