BFY196 HiRel NPN Silicon RF Transistor • HiRel Discrete and Microwave Semiconductor • For low noise, high-gain amplifiers up to 2GHz. • For linear broadband amplifiers • Hermetically sealed microwave package • fT= 6,5 GHz F = 3 dB at 2 GHz • Space Qualification Expected 1998 ESA/SCC Detail Spec. No.: 5611/006 Type Variant No. 07 (tbc.) 4 3 1 2 ESD: Electrostatic discharge sensitive device, observe handling precautions! Type BFY196 (ql) (ql) Quality Level: Marking - Ordering Code see below Pin Configuration C E B E Package Micro-X1 P: Professional Quality, Ordering Code: Q62702F1684 H: High Rel Quality, Ordering Code: on request S: Space Quality, Ordering Code: on request (see order instructions for ordering example) Semiconductor Group 1 of 5 Draft B, September 99 BFY196 Maximum Ratings Parameter Symbol Values Unit Collector-emitter voltage VCEO 12 V Collector-emitter voltage, VBE=0 VCES 20 V Collector-base voltage VCBO 20 V Emitter-base voltage VEBO 2 V Collector current IC 100 mA Base current IB 12 Total power dissipation, 2), 3) TS ≤ 105°C Ptot 700 mW Junction temperature Tj 200 °C Operating temperature range Top -65...+200 °C Storage temperature range Tstg -65...+200 °C Rth JS < 135 K/W 1) mA Thermal Resistance Junction-soldering point 3.) Notes.: 1) The maximum permissible base current for VFBE measurements is 50mA (spotmeasurement duration < 1s) 2) At TS = + 105 °C. For TS > + 105 °C derating is required. 3) TS is measured on the collector lead at the soldering point to the pcb. Electrical Characteristics at TA=25°C; unless otherwise specified Parameter Symbol Values Unit min. typ. max. ICBO - - 100 µA ICEX - - 1000 µA ICBO - - 50 nA IEBO - - 25 µA IEBO - - 0.5 µA DC Characteristics Collector-base cutoff current VCB = 20 V, IE = 0 Collector-emitter cutoff current VCE = 12 V, IB = 1µA 1.) Collector-base cutoff current VCB = 10 V, IE = 0 Emitter base cuttoff current VEB = 2 V, IC = 0 Emitter base cuttoff current VEB = 1 V, IC = 0 Notes: 1.) This Test assures V(BR)CE0 > 12V Semiconductor Group 2 of 5 Draft B, September 99 BFY196 Electrical Characteristics (continued) Parameter Symbol Values Unit min. typ. max. VFBE - - 1 V hFE 50 100 175 - fT 6 6.5 - GHz CCB - 1 1.3 pF CCE - 0.44 - pF CEB - 3,6 4,3 pF F - 3 3.5 dB 10 11 - dB 2 |S21e| 4 5 - dB POUT 18.5 19.5 - dBm DC Characteristics Base-Emitter forward voltage IE = 50 mA, IC = 0 DC current gain IC = 50 mA, VCE = 8 V AC Characteristics Transition frequency IC = 70 mA, VCE = 5 V, f = 500 MHz Collector-base capacitance VCB = 10 V, VBE = vbe = 0, f = 1 MHz Collector-emitter capacitance VCE = 10 V, VBE = vbe = 0, f = 1 MHz Emitter-base capacitance VEB = 0.5V, VCB = vcb = 0, f = 1 MHz Noise Figure IC = 20 mA, VCE = 5 V, f = 2 GHz, ZS = ZSopt Power gain Gma 1.) IC = 70 mA, VCE = 5V, f = 2 GHz ZS = ZSopt , ZL= ZLopt Transducer gain IC = 70 mA, VCE = 5 V, f = 2 GHz ZS = ZL = 50 Ω Output Power IC = 80 mA, VCE = 5 V, f = 2 GHz , PIN=15 dBm, ZS = ZL = 50 Ω Notes.: 1) Gma = S 21 ( k − k 2 − 1) , S12 Semiconductor Group Gms = S 21 S12 3 of 5 Draft B, September 99 BFY196 Order Instructions: Full type variant including quality level must be specified by the orderer. For HiRel Discrete and Microwave Semiconductors the ordering code specifies device family and quality level. Ordering Form: Ordering Code: Q.......... BFY196 (ql) (ql): Quality Level Ordering Example: Ordering Code: Q62702F1684 BFY196 P For BFY196 in Professional Quality Level Further Informations: See our WWW-Pages: - Discrete and RF-Semiconductors (Small Signal Semiconductors) www.infineon.com/product/discrete/hirel.htm - HiRel Discrete and Microwave Semiconductors www.infineon.com/product/discrete/hirel.htm Please contact also our marketing division : Tel.: Fax.: ++89 234 24480 ++89 234 28438 e-mail: Address: [email protected] Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich Semiconductor Group 4 of 5 Draft B, September 99 BFY196 Micro-X1 Package Infineon Technologies AG 1998. All Rights Reserved. 4 3 1 2 Published by Infineon Technologies Semiconductors, High Frequency Products Marketing, P.O.Box 801709, D-81617 Munich. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, delivery and prices please contact the Offices of Semiconductor Group in Germany or the Infineon Technologies Companies and Representatives woldwide (see address list). Due to technical requirements components may contain dangerous substances. For information on the type in question please contact your nearest Infineon Technologies Office, Semiconductor Group. Infineon Technologies Semiconductors is a certified CECC and QS9000 manufacturer (this includes ISO 9000). Semiconductor Group 5 of 5 Draft B, September 99