BLF6G20-180RN; BLF6G20LS-180RN Power LDMOS transistor Rev. 01 — 17 November 2008 Product data sheet 1. Product profile 1.1 General description 180 W LDMOS power transistor for base station applications at frequencies from 1800 MHz to 2000 MHz. Table 1. Typical performance Typical RF performance at Tcase = 25 °C in a class-AB production test circuit. Mode of operation 2-carrier WCDMA [1] f VDS PL(AV) Gp ηD IMD3 ACPR (MHz) (V) (W) (dB) (%) (dBc) (dBc) 1930 to 1990 30 40 17.2 27 −38[1] −41[1] Test signal: 3GPP; test model 1; 64 DPCH; PAR = 7 dB at 0.01 % probability on CCDF per carrier; carrier spacing 10 MHz. CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling. 1.2 Features n Typical 2-carrier WCDMA performance at frequencies of 1930 MHz and 1990 MHz, a supply voltage of 30 V and an IDq of 1400 mA: u Average output power = 40 W u Power gain = 17.2 dB u Efficiency = 27 % u IMD3 = −41 dBc u ACPR = −38 dBc n Easy power control n Integrated ESD protection n Enhanced ruggedness n High efficiency n Excellent thermal stability n Designed for broadband operation (1800 MHz to 2000 MHz) n Internally matched for ease of use BLF6G20(LS)-180RN NXP Semiconductors Power LDMOS transistor n Compliant to Directive 2002/95/EC, regarding Restriction of Hazardous Substances (RoHS) 1.3 Applications n RF power amplifiers for GSM, GSM EDGE, W-CDMA and CDMA base stations and multi carrier applications in the 1800 MHz to 2000 MHz frequency range 2. Pinning information Table 2. Pinning Pin Description Simplified outline Graphic symbol BLF6G20-180RN (SOT502A) 1 drain 2 gate 3 source 1 1 3 [1] 2 2 3 sym112 BLF6G20LS-180RN (SOT502B) 1 drain 2 gate 3 source 1 1 3 [1] 2 2 3 sym112 [1] Connected to flange. 3. Ordering information Table 3. Ordering information Type number BLF6G20-180RN Package Name Description Version - flanged LDMOST ceramic package; 2 mounting holes; 2 leads SOT502A earless flanged LDMOST ceramic package; 2 leads SOT502B BLF6G20LS-180RN - 4. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Min Max Unit VDS drain-source voltage Conditions - 65 V VGS gate-source voltage −0.5 +13 V ID drain current - 49 A Tstg storage temperature −65 +150 °C Tj junction temperature - 225 °C BLF6G20-180RN_20LS-180RN_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 17 November 2008 2 of 12 BLF6G20(LS)-180RN NXP Semiconductors Power LDMOS transistor 5. Thermal characteristics Table 5. Thermal characteristics Symbol Parameter Conditions Type Typ Unit Rth(j-case) thermal resistance from junction to case Tcase = 80 °C; PL = 40 W BLF6G20-180RN 0.50 K/W BLF6G20LS-180RN 0.37 K/W 6. Characteristics Table 6. Characteristics Tj = 25 °C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit V(BR)DSS drain-source breakdown voltage VGS = 0 V; ID = 0.9 mA 65 - - V VGS(th) gate-source threshold voltage VDS = 10 V; ID = 270 mA 1.4 2.0 2.4 V VGSq gate-source quiescent voltage VDS = 28 V; ID = 1.62 A 1.5 2.0 2.5 V IDSS drain leakage current VGS = 0 V; VDS = 28 V - - 5 µA IDSX drain cut-off current VGS = VGS(th) + 3.75 V; VDS = 10 V 40 45 - A IGSS gate leakage current VGS = 13 V; VDS = 0 V - - 450 nA gfs forward transconductance VDS = 10 V; ID = 13.5 A - 19.5 - S RDS(on) drain-source on-state resistance VGS = VGS(th) + 3.75 V; ID = 9.45 A - 0.06 - Ω Crs feedback capacitance VGS = 0 V; VDS = 30 V; f = 1 MHz - 3.3 - pF 7. Application information Table 7. Application information Mode of operation: 2-carrier WCDMA; PAR = 7 dB at 0.01 % probability on the CCDF; f1 = 1932.5 MHz; f2 = 1942.5 MHz; f3 = 1977.5 MHz; f4 = 1987.5 MHz; RF performance at VDS = 30 V; IDq = 1400 mA; Tcase = 25 °C; unless otherwise specified; in a class-AB production test circuit. Symbol Parameter Conditions Min Typ Max Unit PL(AV) average output power - 40 - W Gp power gain PL(AV) = 40 W 16.3 17.2 - dB RLin input return loss PL(AV) = 40 W - −15 −10 dB ηD drain efficiency PL(AV) = 40 W 24 27 - % IMD3 third order intermodulation distortion PL(AV) = 40 W - −38 −35 dBc ACPR adjacent channel power ratio PL(AV) = 40 W - −41 −39 dBc 7.1 Ruggedness in class-AB operation The BLF6G20-180RN and BLF6G20LS-180RN are capable of withstanding a load mismatch corresponding to VSWR = 10 : 1 through all phases under the following conditions: VDS = 30 V; IDq = 1400 mA; PL = 180 W (CW); f = 1990 MHz. BLF6G20-180RN_20LS-180RN_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 17 November 2008 3 of 12 BLF6G20(LS)-180RN NXP Semiconductors Power LDMOS transistor 7.2 One-tone CW 001aai651 19 50 ηD (%) Gp (dB) 18 40 Gp 30 17 ηD 16 20 15 10 14 0 60 10 180 120 PL (W) VDS = 30 V; IDq = 1400 mA; f = 1960 MHz. Fig 1. One-tone CW power gain and drain efficiency as function of load power; typical values 7.3 Two-tone CW 001aai652 19 50 ηD (%) Gp (dB) 40 18 Gp 001aai653 −20 IMD (dBc) IMD3 −30 30 17 IMD5 −40 ηD 20 16 IMD7 −50 10 15 14 0 60 10 180 120 −60 0 PL(PEP) (W) 180 VDS = 30 V; IDq = 1400 mA; f = 1960 MHz. Two-tone CW power gain and drain efficiency as function of peak envelope load power; typical values Fig 3. Two-tone CW intermodulation distortion as a function of peak envelope load power; typical values BLF6G20-180RN_20LS-180RN_1 Product data sheet 120 PL(PEP) (W) VDS = 30 V; IDq = 1400 mA; f = 1960 MHz. Fig 2. 60 © NXP B.V. 2008. All rights reserved. Rev. 01 — 17 November 2008 4 of 12 BLF6G20(LS)-180RN NXP Semiconductors Power LDMOS transistor 7.4 2-carrier W-CDMA 001aai654 19 ηD (%) Gp (dB) 18 001aai655 −30 IMD, ACPR (dBc) −35 40 30 IMD3 −40 Gp −45 17 ACPR 20 ηD −50 16 −55 10 0 20 40 60 0 20 40 60 PL(AV) (W) PL(AV) (W) VDS = 30 V; IDq = 1400 mA; f = 1960 MHz (±5 MHz); carrier spacing 10 MHz. Fig 4. VDS = 30 V; IDq = 1400 mA; f = 1960 MHz (±5 MHz); carrier spacing 10 MHz. 2-carrier W-CDMA power gain and drain efficiency as function of average load power; typical values Fig 5. 2-carrier W-CDMA adjacent channel power ratio and third order intermodulation distortion as function of average load power; typical values 8. Test information VDD R2 VGG C25 C8 C11 C7 R1 C6 C9 C2 C16 C17 C18 C21 C23 C5 C1 input C12 C13 C4 C14 output C3 C10 C15 C19 C20 C22 C24 001aai656 The drawing is not to scale. Fig 6. Test circuit for operation at 2000 MHz BLF6G20-180RN_20LS-180RN_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 17 November 2008 5 of 12 BLF6G20(LS)-180RN NXP Semiconductors Power LDMOS transistor C11 R2 C17 C21 C8 C7 C6 C5 C25 C9 C16 C18 C23 R1 C2 C4 C12 C1 C3 C13 C14 C15 C20 C24 C19 C22 C10 001aai657 The striplines are on a double copper-clad Taconic RF35 Printed-Circuit Board (PCB) with εr = 3.5 and thickness = 0.76 mm. See Table 8 for list of components. The drawing is not to scale. Fig 7. Component layout Table 8. List of components (see Figure 6 and Figure 7) The Printed-Circuit Board (PCB) used is a double copper-clad Taconic RF35 with εr = 3.5 and thickness = 0.76 mm. Component Description Value Remarks C1 multilayer ceramic chip capacitor 1.9 pF [1] C2 multilayer ceramic chip capacitor 2.0 pF [1] ATC 100B or capacitor of same quality 0.6 pF [1] ATC 100B or capacitor of same quality 1.8 pF [1] ATC 100B or capacitor of same quality [1] ATC 100B or capacitor of same quality C3 C4 multilayer ceramic chip capacitor multilayer ceramic chip capacitor C5, C12, C15, C16 multilayer ceramic chip capacitor 11 pF C6, C7, C17, C18, C19, C20 multilayer ceramic chip capacitor 220 nF C8 multilayer ceramic chip capacitor 100 nF ATC 100B or capacitor of same quality Vishay or capacitor of same quality Vishay or capacitor of same quality [1] ATC 100B or capacitor of same quality C9, C10 multilayer ceramic chip capacitor 12 pF C11 multilayer ceramic chip capacitor 10 µF C13 multilayer ceramic chip capacitor 1.0 pF [1] ATC 100B or capacitor of same quality [1] ATC 100B or capacitor of same quality C14 multilayer ceramic chip capacitor 0.3 pF C21, C22 multilayer ceramic chip capacitor 1.5 µF C23, C24 multilayer ceramic chip capacitor 10 µF; 50 V C25 electrolytic capacitor 220 µF; 63 V BLF6G20-180RN_20LS-180RN_1 Product data sheet TDK or capacitor of same quality © NXP B.V. 2008. All rights reserved. Rev. 01 — 17 November 2008 6 of 12 BLF6G20(LS)-180RN NXP Semiconductors Power LDMOS transistor Table 8. List of components (see Figure 6 and Figure 7) …continued The Printed-Circuit Board (PCB) used is a double copper-clad Taconic RF35 with εr = 3.5 and thickness = 0.76 mm. Component Description Value Remarks L1 ferrite SMD bead - Ferroxcube BDS 3/3/4.6-4S2 or equivalent R1 SMD resistor 2.7 Ω R2 SMD resistor 6.8 Ω [1] Solder vertically. BLF6G20-180RN_20LS-180RN_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 17 November 2008 7 of 12 BLF6G20(LS)-180RN NXP Semiconductors Power LDMOS transistor 9. Package outline Flanged LDMOST ceramic package; 2 mounting holes; 2 leads SOT502A D A F 3 D1 U1 B q c C 1 H L E1 p U2 E w1 M A M B M A 2 w2 M C M b 0 5 Q 10 mm scale DIMENSIONS (millimetre dimensions are derived from the original inch dimensions) UNIT A b c mm 4.72 3.43 12.83 12.57 0.15 0.08 inches 0.186 0.135 0.505 0.006 0.495 0.003 OUTLINE VERSION E E1 F H L p Q q U1 U2 w1 w2 20.02 19.96 19.61 19.66 9.50 9.30 9.53 9.25 1.14 0.89 19.94 18.92 5.33 4.32 3.38 3.12 1.70 1.45 27.94 34.16 33.91 9.91 9.65 0.25 0.51 0.788 0.786 0.772 0.774 0.374 0.375 0.366 0.364 0.067 1.100 0.057 1.345 1.335 0.390 0.380 0.01 0.02 D D1 0.045 0.785 0.035 0.745 0.210 0.133 0.170 0.123 REFERENCES IEC JEDEC JEITA ISSUE DATE 99-12-28 03-01-10 SOT502A Fig 8. EUROPEAN PROJECTION Package outline SOT502A BLF6G20-180RN_20LS-180RN_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 17 November 2008 8 of 12 BLF6G20(LS)-180RN NXP Semiconductors Power LDMOS transistor Earless flanged LDMOST ceramic package; 2 leads SOT502B D A F 3 D D1 c U1 1 L H E1 U2 E 2 w2 M D M b 0 5 Q 10 mm scale DIMENSIONS (millimetre dimensions are derived from the original inch dimensions) UNIT A b c mm 4.72 3.43 12.83 12.57 0.15 0.08 inches 0.186 0.135 0.505 0.006 0.495 0.003 OUTLINE VERSION E E1 F H L Q U1 U2 w2 20.02 19.96 19.61 19.66 9.50 9.30 9.53 9.25 1.14 0.89 19.94 18.92 5.33 4.32 1.70 1.45 20.70 20.45 9.91 9.65 0.25 0.788 0.786 0.772 0.774 0.374 0.375 0.366 0.364 0.045 0.785 0.035 0.745 0.210 0.170 0.067 0.815 0.057 0.805 D D1 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 03-01-10 07-05-09 SOT502B Fig 9. 0.390 0.010 0.380 Package outline SOT502B BLF6G20-180RN_20LS-180RN_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 17 November 2008 9 of 12 BLF6G20(LS)-180RN NXP Semiconductors Power LDMOS transistor 10. Abbreviations Table 9. Abbreviations Acronym Description 3GPP Third Generation Partnership Project CCDF Complementary Cumulative Distribution Function CDMA Code Division Multiple Access CW Continuous Wave DPCH Dedicated Physical CHannel EDGE Enhanced Data rates for GSM Evolution GSM Global System for Mobile communications LDMOS Laterally Diffused Metal Oxide Semiconductor LDMOST Laterally Diffused Metal-Oxide Semiconductor Transistor PAR Peak-to-Average power Ratio PDPCH transmission Power of the Dedicated Physical CHannel RF Radio Frequency VSWR Voltage Standing Wave Ratio W-CDMA Wideband Code Division Multiple Access 11. Revision history Table 10. Revision history Document ID Release date Data sheet status Change notice Supersedes BLF6G20-180RN_20LS-180RN_1 20081117 Product data sheet - - BLF6G20-180RN_20LS-180RN_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 17 November 2008 10 of 12 BLF6G20(LS)-180RN NXP Semiconductors Power LDMOS transistor 12. Legal information 12.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 12.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 12.3 Disclaimers General — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 12.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 13. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] BLF6G20-180RN_20LS-180RN_1 Product data sheet © NXP B.V. 2008. All rights reserved. Rev. 01 — 17 November 2008 11 of 12 NXP Semiconductors BLF6G20(LS)-180RN Power LDMOS transistor 14. Contents 1 1.1 1.2 1.3 2 3 4 5 6 7 7.1 7.2 7.3 7.4 8 9 10 11 12 12.1 12.2 12.3 12.4 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Application information. . . . . . . . . . . . . . . . . . . 3 Ruggedness in class-AB operation. . . . . . . . . . 3 One-tone CW . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Two-tone CW . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2-carrier W-CDMA . . . . . . . . . . . . . . . . . . . . . . 5 Test information . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Legal information. . . . . . . . . . . . . . . . . . . . . . . 11 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information. . . . . . . . . . . . . . . . . . . . . 11 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2008. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 17 November 2008 Document identifier: BLF6G20-180RN_20LS-180RN_1